查看文章

6063 Al alloy is subjected to severe plastic deformation through high-pressure torsion (HPT) using disk samples. The values of the Vickers microhardness and equivalent strain were recorded along diameters in each disk. The microhardness of 6063 Al alloys increases strongly and continuously with increasing equivalent strain but levels off and enters into a steady-state where the hardness remains unchanged with further straining. It is confirmed that the yield and ultimate tensile strength also follows the same single role of the equivalent strain as the hardness. Transmission electron microscopy showed that a subgrain structure develops at an initial stage of straining with individual grains containing dislocations. When increasing the straining, the subgrain size decreases whereas the misorientation angle increases and more dislocations are formed within the grains. In the steady-state range, some recrystallized …