查看文章

This work studies the recovery of two grades of acrylonitrile–butadiene–styrene (ABS) contaminated with low‐density polyethylene (LDPE), by adding styrene–ethylene/butadiene–styrene (SEBS). To simulate contaminated ABS, virgin ABS was mixed with 1, 2, 4, and 8% of LDPE and then extruded at 220°C. After this, the ABS with the highest percentage of LDPE (8%) was mixed with 1, 2, 4, and 8% of SEBS and then extruded. Different blends were mechanically, rheologically, optically, and dimensionally characterized to study how different percentages of LDPE and SEBS modify their properties. The results obtained show how the tensile strength, Young modulus, elongation, and impact strength linearly decrease as the LDPE amount increases, for both natural and black ABS. Through the addition of SEBS to contaminated ABS, it is possible to improve its impact strength and elongation values nearly to those of …