| Research on the milling tool wear and life prediction by establishing an integrated predictive model Y Yang, Y Guo, Z Huang, N Chen, L Li, Y Jiang, N He Measurement 145, 178-189, 2019 | 97 | 2019 |
| Machining distortion minimization for the manufacturing of aeronautical structure Z Zhang, L Li, Y Yang, N He, W Zhao The International Journal of Advanced Manufacturing Technology 73, 1765-1773, 2014 | 82 | 2014 |
| Performance of cemented carbide tools with microgrooves in Ti-6Al-4V titanium alloy cutting Y Yang, Y Su, L Li, N He, W Zhao The International Journal of Advanced Manufacturing Technology 76, 1731-1738, 2015 | 57 | 2015 |
| Assessment of residual stress of 7050-T7452 aluminum alloy forging using the contour method Z Zhang, Y Yang, L Li, B Chen, H Tian Materials Science and Engineering: A 644, 61-68, 2015 | 44 | 2015 |
| Feasible fabrication of a wear-resistant hydrophobic surface S Xiao, X Hao, Y Yang, L Li, N He, H Li Applied Surface Science 463, 923-930, 2019 | 39 | 2019 |
| An experimental study on milling of high-volume fraction SiCP/Al composites with PCD tools of different grain size Y Yang, Q Wu, Z Zhan, L Li, N He, R Shrestha The international journal of advanced manufacturing technology 79, 1699-1705, 2015 | 36 | 2015 |
| Machining deformation of single-sided component based on finishing allowance optimization LI Xiaoyue, LI Liang, Y Yinfei, Z Guolong, HE Ning, D Xiaocen, ... Chinese Journal of Aeronautics 33 (9), 2434-2444, 2020 | 34 | 2020 |
| Determination of residual stresses in Ti/CFRP laminates after preparation using multiple methods Y Xu, H Li, Y Yang, Y Hu, J Tao Composite Structures 210, 715-723, 2019 | 28 | 2019 |
| Uncertainty quantification in machining deformation based on Bayesian network X Li, Y Yang, L Li, G Zhao, N He Reliability Engineering & System Safety 203, 107113, 2020 | 25 | 2020 |
| Tribological performance of surface with different wettability under ball-on-disc test X Hao, P Sun, S Xiao, Y Yang, L Li Applied Surface Science 501, 144228, 2020 | 25 | 2020 |
| A novel tool (single-flute) condition monitoring method for end milling process based on intelligent processing of milling force data by machine learning algorithms Y Yang, B Hao, X Hao, L Li, N Chen, T Xu, KM Aqib, N He International Journal of Precision Engineering and Manufacturing 21, 2159-2171, 2020 | 22 | 2020 |
| Experiment on cutting performance of textured cemented carbide tools with various wettability levels X Hao, H Li, Y Yang, S Xiao, X Song, L Li The International Journal of Advanced Manufacturing Technology 103, 757-768, 2019 | 22 | 2019 |
| Experimental study on high-speed milling of SiCf/SiC composites with PCD and CVD diamond tools B Zhang, Y Du, H Liu, L Xin, Y Yang, L Li Materials 14 (13), 3470, 2021 | 21 | 2021 |
| Investigation on deformation of single-sided stringer parts based on fluctuant initial residual stress Y Yang, X Li, L Li, N He, G Zhao, N Chen, H Lan, Z Zhou Journal of Materials Processing Technology 271, 623-633, 2019 | 19 | 2019 |
| Laser-induced oxidation assisted micro milling of spark plasma sintered TiB2-SiC ceramic Y Yang, G Zhao, M Hu, L Li, N He Ceramics International 45 (10), 12780-12788, 2019 | 19 | 2019 |
| Investigation on the influence of system parameters on ambient air quality in minimum quantity lubrication milling process 赵威， 何宁， 李亮， 杨吟飞， 史琦 Journal of Mechanical Engineering 50 (13), 184-189, 2014 | 19 | 2014 |
| Study on cutting force, cutting temperature and machining residual stress in precision turning of pure iron with different grain sizes Y Yang, L Jin, J Zhu, J Kong, L Li Chinese Journal of Mechanical Engineering 33, 1-9, 2020 | 17 | 2020 |
| Energy principle and material removal sequence optimization method in machining of aircraft monolithic parts Y Yinfei, FAN Longxin, LI Liang, Z Guolong, HAN Ning, LI Xiaoyue, T Hui, ... Chinese Journal of Aeronautics 33 (10), 2770-2781, 2020 | 17 | 2020 |
| Investigation of the coupled distribution of initial and machining-induced residual stress on the surface of thin-walled parts Y Yang, L Xia, G Zhao, L Meng, N He The International Journal of Advanced Manufacturing Technology 98, 213-222, 2018 | 17 | 2018 |
| Measurement of pre-self-balanced surface residual stresses induced by milling in titanium alloys and the FEM validation LH Meng, N He, L Li, YF Yang, W Zhao Advanced Materials Research 996, 615-621, 2014 | 17 | 2014 |
