| Prediction of surface roughness and cutting forces using RSM, ANN, and NSGA-II in finish turning of AISI 4140 hardened steel with mixed ceramic tool I Meddour, MA Yallese, H Bensouilah, A Khellaf, M Elbah The International Journal of Advanced Manufacturing Technology 97, 1931-1949, 2018 | 90 | 2018 |
| Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topography A Khellaf, H Aouici, S Smaiah, S Boutabba, MA Yallese, M Elbah The International Journal of Advanced Manufacturing Technology 89, 333-354, 2017 | 69 | 2017 |
| Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools S Benlahmidi, H Aouici, F Boutaghane, A Khellaf, B Fnides, MA Yallese The International Journal of Advanced Manufacturing Technology 89, 803-820, 2017 | 51 | 2017 |
| Comparative study of the performance of coated and uncoated silicon nitride (Si3N4) ceramics when machining EN-GJL-250 cast iron using the RSM method and … A Laouissi, MA Yallese, A Belbah, A Khellaf, A Haddad Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 …, 2019 | 23 | 2019 |
| Comparative assessment of coated and uncoated ceramic tools on cutting force components and tool wear in hard turning of AISI H11 steel using Taguchi plan and RMS H Aouici, A Khellaf, S Smaiah, M Elbah, B Fnides, MA Yallese Sādhanā 42, 2157-2170, 2017 | 18 | 2017 |
| The implementation of SCADA open protocol IEC60870-5-101 on ARDUINO UNO board S Smaiah, A Khellaf, T Cherifi 2015 4th International Conference on Electrical Engineering (ICEE), 1-6, 2015 | 9 | 2015 |
| A comparative study of the performance of uncoated, PVD, CVD and MTCVD coated carbide inserts in dry turning of AISI4140 steel B Hamadi, MA Yallese, L Boulanouar, A Khellaf, A Haddad Periodica Polytechnica Mechanical Engineering 66 (4), 314-324, 2022 | 3 | 2022 |
| Modelisation et optimisation avancees du processus de tournage des pieces difficilement usinables A KHELLAF | 1 | 2022 |
| Mathematical modeling and multi-objective optimization of technological parameters in Hard Turning operation using RSM and Genetic Algorithmic Approach A Khellaf, M Yallese, S Boutabba, M Habak, H Aouici, S Smaiah Procédés de fabrication et mise en forme par grandes déformations, 2017 | 1 | 2017 |
| Effet Du Revêtement et des Paramètres de Coupe sur la Rugosité de surface Lors de Tournage a Sec de L’Acier 42CrMo4 B HAMADI, A ACHOUR, MA YALLESE, A ZELLAGUI, Ahmed KHELLAF, ... | | 2016 |
| A Surface Roughness Parameters Prediction Model For Hard Turning With CBN Tool SS Ahmed Khellaf, Aouici Hamdi, Brahim Fnides CMEME 2015, 2015 | | 2015 |
| Experimental Investigation and modeling of Cutting force and surface roughness in hard turning of AISI H11 steel with coated and uncoated ceramic tools using Taguchi plan and … FA Ahmed Khellaf, H. Aouici, S. Smaiah, M. Elbah, S. BenlahmidiM Conférence Internationale de Mécanique (ICM’15), 2015 | | 2015 |
| The implementation of SCADA open protocol PUR 2.4 TC S. Smaiah, Ahmed Khellaf 2015 First International Conference on New Technologies of Information and …, 2015 | | 2015 |
| Application de la méthodologie de la surface de réponse (MSR) : pour la modélisation des paramètres de sortie en tournage dur de l’acier AISI D3 usiné par céramique mixte HB Aouici Hamdi, Ahmed Khellaf, Brahim Fnides, N. Kribes, Mohamed Athmane Yalles JENM’2015, 2015 | | 2015 |
| Optimization of MIS/IL solar cells parameters using genetic algorithm KA Ahmed, EA Mohamed, SH Alaa, MS Motaz | | 2004 |
| Experimental investigation and modeling of cutting force and surface roughness in hard turning of AISI H11 steel with coated and uncoated ceramic tools using taguchi plan and … A KHELLAF, H AOUICI, S SMAIAH, M ELBAH, S BENLAHMIDI, ... Université Frères Mentouri-Constantine 1, 0 | | |
Pr Yallese Mohamed AthmaneLaboratoire LMS, Université 8 Mai 1945 Guelma, Algérie, Algeria在 univ-guelma.dz 的电子邮件经过验证
