The effect of feed rate and cutting speed to surface roughness AB Abdullah, LY Chia, Z Samad Asian Journal of Scientific Research 1 (1), 12-21, 2008 | 68 | 2008 |
Development of a low-cost modular pole climbing robot ZM Ripin, TB Soon, AB Abdullah, Z Samad 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New …, 2000 | 63 | 2000 |
CFD simulation of cooperative AUV motion M Husaini, Z Samad, MR Arshad CSIR, 2009 | 50 | 2009 |
Finite element modeling and simulation of proposed design magneto-rheological valve MY Salloom, Z Samad The International Journal of Advanced Manufacturing Technology 54, 421-429, 2011 | 48 | 2011 |
Solder joint inspection with multi-angle imaging and an artificial neural network TY Ong, Z Samad, MM Ratnam The International Journal of Advanced Manufacturing Technology 38, 455-462, 2008 | 47 | 2008 |
Design and modeling magnetorheological directional control valve MY Salloom, Z Samad Journal of Intelligent Material Systems and Structures 23 (2), 155-167, 2012 | 40 | 2012 |
Springback behavior of AA6061 with non-uniform thickness section using Taguchi Method MF Adnan, AB Abdullah, Z Samad The International Journal of Advanced Manufacturing Technology 89, 2041-2052, 2017 | 35 | 2017 |
Brushless dc motor electromagnetic torque estimation with single-phase current sensing CL Cham, ZB Samad Journal of Electrical Engineering and Technology 9 (3), 866-872, 2014 | 33 | 2014 |
Magneto-rheological directional control valve MY Salloom, Z Samad The International Journal of Advanced Manufacturing Technology 58, 279-292, 2012 | 33 | 2012 |
Microstructure analysis and mechanical characteristics of tungsten inert gas and metal inert gas welded AA6082-T6 tubular joint: A comparative study PM E. R. Imam Fauzi, M. S. Che Jamil, Z. Samad Transactions of Nonferrous Metals Society of China 27 (1), 17-24, 2017 | 28 | 2017 |
Work-piece optimization and thermal analysis for flash-less cold forging of AUV propeller hubs—FEM simulation and experiment HMT Khaleed, Z Samad, AR Othman, MA Mujeebu, AB Abdullah, ... Journal of Manufacturing Processes 13 (1), 41-49, 2011 | 27 | 2011 |
Fatigue behaviour of aluminum alloy at elevated temperature FB Bahaideen, AM Saleem, K Hussain, ZM Ripin, ZA Ahmad, Z Samad, ... Modern applied science 3 (4), 52-61, 2009 | 23 | 2009 |
Feasibility studies of Arduino microcontroller usage for IPMC actuator control MA Rosly, Z Samad, MF Shaari 2014 IEEE International Conference on Control System, Computing and …, 2014 | 21 | 2014 |
A comprehensive review of experimental approaches used in the measurement of springback AB Abdullah, SM Sapuan, Z Samad, NA Aziz Advances in Natural and Applied Sciences 6 (2), 195-206, 2012 | 20 | 2012 |
Autonomous underwater vehicle propeller simulation using computational fluid dynamic M Husaini, Z Samad, MR Arshad Computational Fluid Dynamics Technologies and Applications, 293-314, 2011 | 19 | 2011 |
Thermo-mechanical simulation of temperature distribution and prediction of heat-affected zone size in MIG welding process on aluminium alloy En AW 6082-T6 Z Samad, NM Nor, ERI Fauzi IOP Conference Series: Materials Science and Engineering 530 (1), 012016, 2019 | 17 | 2019 |
Effect of corner radius and friction parameters on the optimization of the cold forging die design AR Ab-Kadir, AR Othman, Z Samad, KH MT, AB Abdullah Modern applied science 3 (2), 177-177, 2009 | 17 | 2009 |
Numerical investigation of geometrical defect in cold forging of an AUV blade pin head AB Abdullah, SM Sapuan, Z Samad, HMT Khaleed, NA Aziz Journal of Manufacturing processes 15 (1), 141-150, 2013 | 16 | 2013 |
Error-based autofocus system using image feedback in a liquid-filled diaphragm lens SJ Abdullah, MM Ratnam, Z Samad Optical Engineering 48 (12), 123602-123602-9, 2009 | 16 | 2009 |
Bearing strength and progressive failure analysis of the punched hole of CFRP under tensile loading MS Abdullah, AB Abdullah, MH Hassan, Z Samad The International Journal of Advanced Manufacturing Technology 97, 2163-2171, 2018 | 15 | 2018 |