| Pyrolysis of cassava rhizome in a counter-rotating twin screw reactor unit S Sirijanusorn, K Sriprateep, A Pattiya Bioresource technology 139, 343-348, 2013 | 76 | 2013 |
| Production of bio-oil via fast pyrolysis of cassava rhizome in a fluidised-bed reactor S Suttibak, K Sriprateep, A Pattiya Energy Procedia 14, 668-673, 2012 | 42 | 2012 |
| Computer aided modeling of fiber assemblies K Sreprateep, ELJ Bohez Computer-Aided Design and Applications 3 (1-4), 367-376, 2006 | 32 | 2006 |
| A new computer geometric modelling approach of yarn structures for the conventional ring spinning process K Sriprateep, ELJ Bohez The journal of the textile Institute 100 (3), 223-236, 2009 | 25 | 2009 |
| Production of bio-oil from pine sawdust by rapid pyrolysis in a fluidized-bed reactor S Suttibak, K Sriprateep, A Pattiya Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 37 …, 2015 | 23 | 2015 |
| CAD/CAE for stress–strain properties of multifilament twisted yarns K Sriprateep, ELJ Bohez Textile Research Journal 87 (6), 657-668, 2017 | 17 | 2017 |
| Grey–Taguchi method to optimize the percent zinc coating balances edge joints for galvanized steel sheets using metal inert gas pulse brazing process K Songsorn, K Sriprateep, S Rittidech Advances in Mechanical Engineering 8 (6), 1687814016651194, 2016 | 13 | 2016 |
| Application of Taguchi method in the optimization of cutting parameters for turning metal matrix composite K Sriprateep, P Patumchat, W Theansuwan Advanced Materials Research 189, 3056-3060, 2011 | 12 | 2011 |
| Computer aided geometric modeling of twist fiber K Sriprateep, A Pattiya Journal of Computer Science 5 (3), 221, 2009 | 9 | 2009 |
| The effect of sub-critical heat treatment on hardness, retained austenite and abrasive wear resistance of hypoeutectic 16 mass% Cr-2 mass% Mo cast iron with varying vanadium … P Kosasu, S Inthidech, K Sriprateep, Y Matsubara Materials Transactions 57 (2), 174-182, 2016 | 8 | 2016 |
| CAD/CAE for stress–strain properties of a wide range of multifilament twisted man-made filament yarns K Sriprateep Textile Research Journal 89 (2), 204-215, 2019 | 7 | 2019 |
| New computer geometric modeling approach with filament assembly model for two-ply yarns structures K Sriprateep, S Singto The Journal of the Textile Institute, 2019 | 6 | 2019 |
| New computer geometric modeling approach with filament assembly model for woven fabric structures P Patumchat, K Sriprateep The Journal of the Textile Institute 110 (1), 50-60, 2019 | 6 | 2019 |
| Heterogeneous ensemble machine learning to predict the asiaticoside concentration in centella asiatica urban K Sriprateep, S Sala-Ngamand, S Khonjun, ML Tseng, T Srichok, ... Intelligent Systems with Applications 21, 200319, 2024 | 2 | 2024 |
| Optimization of Metal Inert Gas Pulse Brazing Process on Galvanized Steel Sheets Based on Taguchi Method K Songsorn, K Sriprateep, S Rittidech The Journal of Industrial Technology 13 (2), 78-95, 2017 | 2 | 2017 |
| Effect of Vanadium on subcritical heat treatment behavior of hypoeutectic 16 wt% Cr cast iron containing 2 wt% Mo R Junsamoot, S Inthidech, K Sriprateep, P Sricharoenchai, Y Matsubara Journal of Metals, Materials and Minerals 21 (2), 13-18, 2011 | 2 | 2011 |
| Preferential formation of the stereocomplex crystals of poly(L‐lactide) and poly(D‐lactide) blend by epoxidized soybean oil under nonisothermal crystallization W Li, Y Srithep, J Shen, D Pholharn, K Sriprateep, P Worajittiphon, ... Polymers for Advanced Technologies 35 (1), e6278, 2024 | 1 | 2024 |
| Toughening polylactide stereocomplex by injection molding with thermoplastic starch and chain extender Y Srithep, D Pholharn, P Worajittiphon, K Sriprateep, O Veang-In, J Morris Polymers 15 (9), 2055, 2023 | 1 | 2023 |
| Optimization for turning metal matrix composites with multiple performance characteristics K Sriprateep Applied Mechanics and Materials 121, 1479-1483, 2012 | 1 | 2012 |
| Design Optimization of Cutting Parameters when Drilling Metal Matrix Composites K Sriprateep, S Inthidech, S Singto, P Patumchat Applied mechanics and materials 121, 1311-1315, 2012 | 1 | 2012 |
