| Magnetic mechanisms of magnetic flux leakage nondestructive testing Y Sun, Y Kang Applied Physics Letters 103 (18), 2013 | 81 | 2013 |
| A new MFL principle and method based on near-zero background magnetic field Y Sun, Y Kang Ndt & E International 43 (4), 348-353, 2010 | 80 | 2010 |
| Theoretical analyses of MFL signal affected by discontinuity orientation and sensor-scanning direction J Wu, Y Sun, Y Kang, Y Yang IEEE Transactions on Magnetics 51 (1), 1-7, 2014 | 77 | 2014 |
| A review of wire rope detection methods, sensors and signal processing techniques S Liu, Y Sun, X Jiang, Y Kang Journal of Nondestructive Evaluation 39 (4), 85, 2020 | 71 | 2020 |
| A new NDT method based on permanent magnetic field perturbation Y Sun, Y Kang, C Qiu NDT & E International 44 (1), 1-7, 2011 | 54 | 2011 |
| Magnetic compression effect in present MFL testing sensor Y Sun, Y Kang Sensors and Actuators A: Physical 160 (1-2), 54-59, 2010 | 44 | 2010 |
| The effect of motion-induced eddy current on circumferential magnetization in MFL testing for a steel pipe J Wu, Y Sun, B Feng, Y Kang IEEE Transactions on Magnetics 53 (7), 1-6, 2017 | 40 | 2017 |
| A new signal processing method based on notch filtering and wavelet denoising in wire rope inspection S Liu, Y Sun, W Ma, F Xie, X Jiang, L He, Y Kang Journal of Nondestructive Evaluation 38, 1-14, 2019 | 39 | 2019 |
| A permanent magnetic perturbation testing sensor Y Sun, Y Kang, C Qiu Sensors and Actuators A: Physical 155 (2), 226-232, 2009 | 39 | 2009 |
| A lift-off-tolerant magnetic flux leakage testing method for drill pipes at wellhead J Wu, H Fang, L Li, J Wang, X Huang, Y Kang, Y Sun, C Tang Sensors 17 (1), 201, 2017 | 36 | 2017 |
| An opening electric-MFL detector for the NDT of in-service mine hoist wire Y Sun, J Wu, B Feng, Y Kang IEEE Sensors Journal 14 (6), 2042-2047, 2014 | 35 | 2014 |
| Comparison and analysis of multiple signal processing methods in steel wire rope defect detection by hall sensor S Liu, Y Sun, X Jiang, Y Kang Measurement 171, 108768, 2021 | 34 | 2021 |
| A permeability-measuring magnetic flux leakage method for inner surface crack in thick-walled steel pipe Z Deng, Y Sun, Y Kang, K Song, R Wang Journal of Nondestructive Evaluation 36, 1-14, 2017 | 34 | 2017 |
| A methodology for identifying defects in the magnetic flux leakage method and suggestions for standard specimens Y Sun, B Feng, S Liu, Z Ye, S Chen, Y Kang Journal of Nondestructive Evaluation 34, 1-9, 2015 | 32 | 2015 |
| Review and analysis of three representative electromagnetic NDT methods S Liu, Y Sun, M Gu, C Liu, L He, Y Kang Insight-Non-Destructive Testing and Condition Monitoring 59 (4), 176-183, 2017 | 31 | 2017 |
| Effects of surface roughness on magnetic flux leakage testing of micro-cracks Z Deng, Y Sun, Y Yang, Y Kang Measurement Science and Technology 28 (4), 045003, 2017 | 28 | 2017 |
| Magnetic flux leakage structural health monitoring of concrete rebar using an open electromagnetic excitation technique Y Sun, S Liu, Z Deng, R Tang, W Ma, X Tian, Y Kang, L He Structural Health Monitoring 17 (2), 121-134, 2018 | 27 | 2018 |
| PIPE test Y Kang, J Wu, Y Sun Materials Evaluation 70 (7), 821-827, 2012 | 27 | 2012 |
| Influence of motion induced eddy current on the magnetization of steel pipe and MFL signal B Feng, Y Kang, Y Sun, Y Yang, X Yan International Journal of Applied Electromagnetics and Mechanics 52 (1-2 …, 2016 | 26 | 2016 |
| A novel E-exponential stochastic resonance model and weak signal detection method for steel wire rope S Liu, Y Sun, Y Kang IEEE Transactions on Industrial Electronics 69 (7), 7428-7440, 2021 | 25 | 2021 |
