| Effect of the carding process and reinforcement method of carbon fiber/polypropylene fiber nonwoven fabrics on the anisotropic mechanical properties of hot-pressed composites Y Shao, M Matsushita, Y Yang, A Ohtani, D Zhao, R Liu, Y Yang Fibers and Polymers 21, 1115-1125, 2020 | 15 | 2020 |
| Effect of de-sizing on the structural and mechanical properties of carbon fiber reinforced polypropylene composites molded by the novel direct fiber feeding injection molding … K Ahmed, X Qin, Y Pang, Y Shao, SR Islam, Y Yang, H Hamada, L Yu Journal of Thermoplastic Composite Materials 36 (5), 1847-1876, 2023 | 13 | 2023 |
| Rapid fiber-to-fiber recycling of poly (ethylene terephthalate) and its dye from waste textiles without damaging their chemical structures B Mu, Y Shao, L McBride, H Hidalgo, Y Yang Resources, Conservation and Recycling 197, 107102, 2023 | 12 | 2023 |
| Effect of low-cycle fatigue and hydrothermal aging on tensile properties of open-hole glass fiber/polycarbonate and glass fiber/polyamide 6 composites Y Shao, Y Dong, Y Yang Fibers and Polymers 22 (9), 2527-2534, 2021 | 12 | 2021 |
| Complete recycling of polymers and dyes from polyester/cotton blended textiles via cost-effective and destruction-minimized dissolution, swelling, precipitation, and separation B Mu, X Yu, Y Shao, L McBride, H Hidalgo, Y Yang Resources, Conservation and Recycling 199, 107275, 2023 | 7 | 2023 |
| Profitable and environmentally responsible recycling of fibers and reactive dyes from afterlife cotton textiles via controlled dye hydrolysis, fiber swelling and dissolution B Mu, X Yu, Y Shao, L McBride, H Hidalgo, Y Yang Chemical Engineering Journal 475, 146150, 2023 | 7 | 2023 |
| Recycling and high-value utilization of polyethylene terephthalate wastes: A review T Ren, H Zhan, H Xu, L Chen, W Shen, Y Xu, D Zhao, Y Shao, Y Wang Environmental Research, 118428, 2024 | 5 | 2024 |
| Flexural properties and low-cycle bending fatigue of anisotropic carbon fiber mat reinforced composites Y Shao, M Matsushita, Y Lyu, Y Yang Journal of Physics: Conference Series 1790 (1), 012077, 2021 | 4 | 2021 |
| High-quality separation and recovery of nylon and dyes from waste carpet via non-destructive dissolution and controlled precipitation for sustainable recycling B Mu, Y Shao, X Yu, L McBride, H Hidalgo, Y Yang Separation and Purification Technology 332, 125801, 2024 | 3 | 2024 |
| Residual fiber length and fiber orientation of anisotropic injection molded glass fiber reinforced polyamide 66 composites in experimental and numerical study Y Shao, C Xue, M Chu, Y Yang Fibers and Polymers 22 (7), 1995-2005, 2021 | 3 | 2021 |
| Tensile and water absorption properties of notched glass fiber/polypropylene and glass fiber/polyoxymethylene injection-molded composites Y Shao, Y Dong, D Zhao, Y Yang The Journal of The Textile Institute 114 (2), 241-249, 2022 | 2 | 2022 |
| High-quality acrylic fibers from waste textiles B Mu, X Yu, Y Shao, Y Yang Science of The Total Environment 931, 172752, 2024 | | 2024 |
| Effect of Manufacturing Parameters of Lightweight Hernia Mesh Material on Its Mechanical Properties. XU Rui, ZOU Ting, SUN Hongrui, S Yuanyi, C Yuhan, W Fujun, LI Yan, ... Journal of Donghua University (English Edition) 34 (2), 2017 | | 2017 |
