A review on laser beam welding of titanium alloys ST Auwal, S Ramesh, F Yusof, SM Manladan The international Journal of advanced manufacturing technology 97, 1071-1098, 2018 | 128 | 2018 |
A review on laser beam welding of copper alloys ST Auwal, S Ramesh, F Yusof, SM Manladan The International Journal of Advanced Manufacturing Technology 96, 475-490, 2018 | 107 | 2018 |
Effect of heat treatment temperature on mechanical properties of the AISI 304 stainless steel SA Tukur, MS Dambatta, A Ahmed, NM Mu’az International Journal of Innovative Research in Science, Engineering and …, 2014 | 52 | 2014 |
Effect of tempering temperature on mechanical properties of medium carbon steel SA Tukur, MM Usman, I Muhammad, NA Sulaiman International Journal of Engineering Trends and Technology 9 (15), 798-800, 2014 | 37 | 2014 |
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints ST Auwal, S Ramesh, Z Zhang, J Liu, C Tan, SM Manladan, F Yusof, ... Journal of Manufacturing Processes 37, 251-265, 2019 | 20 | 2019 |
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy ST Auwal, S Ramesh, Z Zhang, F Yusof, J Liu, C Tan, SM Manladan, ... Optics & Laser Technology 115, 149-159, 2019 | 16 | 2019 |
Comparative study on characteristics of laser welded-brazed AZ31/Ti-6Al-4V lap joints with and without coatings ST Auwal, S Ramesh, F Yusof, CW Tan, ZQ Zhang, XY Zhao, ... The International Journal of Advanced Manufacturing Technology 101, 1023-1040, 2019 | 7 | 2019 |
Recent developments and challenges in welding of magnesium to titanium alloys ST Auwal, S Ramesh, C Tan, Z Zhang, X Zhao, SM Manladan Advances in materials Research 8 (1), 47-73, 2019 | 6 | 2019 |
A model study for the electric pulse frequency effects on the solidification behavior of Al-5% Сu alloy Q Jingang, L Yang, SA Tukur Intern. Journal of Scientific & Technology Research 3 (9), 267-274, 2014 | 3 | 2014 |
Design of self-erecting tower for a wind turbine A Ibrahim, IS Diso, ST Auwal, MA Ibrahim, MS Dambatta, S Ramesh Int. J. Eng. Res. Technol 6 (12), 63-82, 2020 | 2 | 2020 |
Challenges and Advances in Welding and Joining Magnesium Alloy to Steel ST Auwal, MS Dambatta, S Ramesh, T Caiwang Engineering Principles-Welding and Residual Stresses, 2022 | 1 | 2022 |
Effects of Using Rice Husk and Paper Pulp as Organic Binding Agents on Calorific Value of Biomass (Sawdust) Briquettes NM Mu’az, MS Dambatta, SA Tukur, B Abdullahi, U Abdullahi 2nd National Engineering Conference, ACICON, 1-5, 2016 | 1 | 2016 |
DESIGN AND CONSTRUCTION OF A 500W WIND GENERATOR USING THIN SHEET METAL TURBINE BLADES A Ibrahim, BI Kunya, A Ahmad, KP Dare, S Isah, AO Job, ST Auwal, ... GSJ 11 (6), 2023 | | 2023 |
Parametric Study on Abrasive Wear of Reinforced Polytetrafluroethylene Composites Using Taguchi Model MA Ibrahim, M Tambaya, AG Yusuf, ST Auwal, D Kurniawan, S Ramesh Proceeding of 5th International Conference on Advances in Manufacturing and …, 2023 | | 2023 |
Energy Cost Characteristics of a Micro-Wind Power System Based on Different Capacity Factor: A Case Study of Locations in Nigeria BI Kunya, Y Alhassan, ST Auwal, M Tambaya, D Kurniawan, S Ramesh Proceeding of 5th International Conference on Advances in Manufacturing and …, 2023 | | 2023 |
Dynamic mechanical thermal analysis of PTFE based composites MA Ibrahim, H Çamur, MA Savaş, AK Sabo, SA Tukur, AY Gidado, ... AIP Conference Proceedings 2643 (1), 2023 | | 2023 |
Improving microstructural homogeneity and reducing grain size of Zn-3Mg alloy through ECAP MS Dambatta, S Izman, ST Auwal, D Kurniawan, S Ramesh, U Abdullahi, ... AIP Conference Proceedings 2643 (1), 2023 | | 2023 |
Characteristics of laser welded brazed AZ31/Ti-6Al-4V dissimilar joints ST Auwal, S Ramesh, A Ibrahim, BI Kunya, N Mu’az, MS Dambatta, ... AIP Conference Proceedings 2643 (1), 2023 | | 2023 |
Performance evaluation of car radiator using nano fluids AS Ahmad, B Abdullahi, ST Auwal, S Ramesh, N Jibrin AIP Conference Proceedings 2643 (1), 2023 | | 2023 |
Effect of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints/Auwal Shamsu Tukur ST Auwal Universiti Malaya, 2019 | | 2019 |