| Modeling and validation of 48v mild hybrid lithium-ion battery pack SD Lee, J Cherry, M Safoutin, J McDonald, M Olechiw SAE International Journal of Alternative Powertrains 7 (3), 273-288, 2018 | 70 | 2018 |
| Development of advanced light-duty powertrain and hybrid analysis tool B Lee, SD Lee, J Cherry, A Neam, J Sanchez, E Nam SAE Technical Paper, 2013 | 44 | 2013 |
| Modeling and controls development of 48 V mild hybrid electric vehicles SD Lee, J Cherry, M Safoutin, A Neam, J McDonald, K Newman SAE Technical Paper, 2018 | 31 | 2018 |
| Modeling and validation of power-split and P2 parallel hybrid electric vehicles SD Lee, B Lee, J McDonald, LJ Sanchez, E Nam SAE Technical Paper, 2013 | 23 | 2013 |
| Development of greenhouse gas emissions model for 2014-2017 heavy-and medium-duty vehicle compliance B Lee, SD Lee, H Zhang, L Quinones, J Sanchez SAE Technical Paper, 2011 | 21 | 2011 |
| Modeling and validation of 12V lead-acid battery for stop-start technology SD Lee, J Cherry, M Safoutin, J McDonald SAE Technical Paper, 2017 | 19 | 2017 |
| Air Flow Optimization and Calibration in High-Compression-Ratio Naturally Aspirated SI Engines with Cooled-EGR SD Lee, C Schenk, J McDonald SAE Technical Paper, 2016 | 15 | 2016 |
| Effect of current and SOC on round-trip energy efficiency of a lithium-iron phosphate (LiFePO4) battery pack M Safoutin, J Cherry, J McDonald, SD Lee SAE Technical Paper, 2015 | 14 | 2015 |
| Hil development and validation of lithium-ion battery packs SD Lee, J Cherry, B Lee, J McDonald, M Safoutin SAE Technical Paper, 2014 | 14 | 2014 |
| Modeling and validation of lithium-ion automotive battery packs SD Lee, B Lee, J McDonald, E Nam SAE Technical Paper, 2013 | 13 | 2013 |
| Applications of friction algorithms for rapid engine concept assessments S Lee, BA Shannon, A Mikulec, G Vrsek SAE Technical Paper, 1999 | 8 | 1999 |
| Real-world emission modeling and validations using PEMS and GPS vehicle data SD Lee, C Fulper, J McDonald, M Olechiw SAE Technical Paper, 2019 | 6 | 2019 |
| Cranktrain Component Conceptual Design and Weight Optimization S Lee, A Mikulec, L Reams, J Chottiner, RW Page SAE 980566, SAE Congress, Detoit, USA, 1998 | 6 | 1998 |
| Applications of Sequential Quadratic Programming to the Optimization of Powertrain Concept Design A Mikulec, S Lee, J McCallum, G Vrsek SAE Technical Paper, 1997 | 6 | 1997 |
| On-Road Portable Emission Measurement Systems Test Data Analysis and Light-Duty Vehicle In-Use Emissions Development SD Lee, CR Fulper, D Cullen, J McDonald, A Fernandez, MH Doorlag, ... SAE International Journal of Electrified Vehicles 9 (2), 111-132, 2020 | 5 | 2020 |
| Critical Engine Geometry Generation for Rapid Powertrain Concept Design Assessment BA Shannon, A Mikulec, RW Page, G Vrsek, S Lee SAE Technical Paper, 1998 | 3 | 1998 |
| Failure analysis of vinyl ester resin/glass fiber composite laminates under tension and bending SD Lee Louisiana State University, Baton Rouge, 1989 | 1 | 1989 |
| On-Road PEMS Test Data Analysis and Light-duty Vehicle In-use Emissions Development SD Lee, C Fulper, D Cullen, J McDonald, A Fernandez, M Doorlag, ... SAE Technical Paper, 2020 | | 2020 |
| Cranktrain system geometry optimisation and dynamic assembly of parametric solid models S Lee, BA Shannon, A Mikulec International Journal of Vehicle Design 23 (1-2), 16-29, 2000 | | 2000 |
| Object-oriented h-, p-version finite element analysis in applications to interlaminar stress distribution and delamination in composite laminates SD Lee The University of Texas at Arlington, 1994 | | 1994 |
