关注
Young-Kyun Kim
Young-Kyun Kim
在 kims.re.kr 的电子邮件经过验证
标题
引用次数
引用次数
年份
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room-and high-temperature yield strength developed by additive manufacturing
B AlMangour, YK Kim, D Grzesiak, KA Lee
Composites Part B: Engineering 156, 51-63, 2019
2082019
High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy
YK Kim, YA Joo, HS Kim, KA Lee
Intermetallics 98, 45-53, 2018
1462018
Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism
YK Kim, J Choe, KA Lee
Journal of Alloys and Compounds 805, 680-691, 2019
1432019
Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy
YJ Kang, S Yang, YK Kim, B AlMangour, KA Lee
Corrosion Science 158, 108082, 2019
892019
High-cycle fatigue and tensile deformation behaviors of coarse-grained equiatomic CoCrFeMnNi high entropy alloy and unexpected hardening behavior during cyclic loading
YK Kim, GS Ham, HS Kim, KA Lee
Intermetallics 111, 106486, 2019
892019
In-situ formed oxide enables extraordinary high-cycle fatigue resistance in additively manufactured CoCrFeMnNi high-entropy alloy
YK Kim, MS Baek, S Yang, KA Lee
Additive Manufacturing 38, 101832, 2021
762021
In-situ carbide-reinforced CoCrFeMnNi high-entropy alloy matrix nanocomposites manufactured by selective laser melting: carbon content effects on microstructure, mechanical …
YK Kim, JH Yu, HS Kim, KA Lee
Composites Part B: Engineering 210, 108638, 2021
732021
Superior temperature-dependent mechanical properties and deformation behavior of equiatomic CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting
YK Kim, S Yang, KA Lee
Scientific reports 10 (1), 8045, 2020
692020
Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting
YK Kim, SH Park, JH Yu, B AlMangour, KA Lee
Materials Science and Engineering: A 715, 33-40, 2018
622018
1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by …
YK Kim, MC Kim, KA Lee
Journal of Materials Science & Technology 97, 10-19, 2022
562022
Compressive creep behavior of selective laser melted CoCrFeMnNi high-entropy alloy strengthened by in-situ formation of nano-oxides
YK Kim, S Yang, KA Lee
Additive Manufacturing 36, 101543, 2020
492020
High-temperature creep behavior of gamma Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting
YK Kim, SJ Youn, SW Kim, J Hong, KA Lee
Materials Science and Engineering: A 763, 138138, 2019
492019
Tuning the microstructure and mechanical properties of cold sprayed equiatomic CoCrFeMnNi high-entropy alloy coating layer
JE Ahn, YK Kim, SH Yoon, KA Lee
Metals and Materials International 27, 2406-2415, 2021
472021
Enhancing the creep resistance of electron beam melted gamma Ti–48Al–2Cr–2Nb alloy by using two-step heat treatment
YK Kim, JK Hong, KA Lee
Intermetallics 121, 106771, 2020
442020
Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting
JU Lee, YK Kim, SM Seo, KA Lee
Materials Science and Engineering: A 841, 143083, 2022
392022
Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti–48Al–2Cr–2Nb alloy additively manufactured by electron beam melting
SJ Youn, YK Kim, SW Kim, KA Lee
Intermetallics 124, 106859, 2020
382020
Effect of Ti addition on the microstructure and high-temperature oxidation property of AlCoCrFeNi high-entropy alloy
GS Ham, YK Kim, YS Na, KA Lee
Metals and Materials International 27, 156-165, 2021
312021
Effect of gaseous hydrogen embrittlement on the mechanical properties of additively manufactured CrMnFeCoNi high-entropy alloy strengthened by in-situ formed oxide
YK Kim, JY Suh, KA Lee
Materials Science and Engineering: A 796, 140039, 2020
272020
2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness
YK Kim, KS Kim, YB Song, JH Park, KA Lee
Journal of Materials Science & Technology 66, 36-45, 2021
242021
Effect of post-heat treatment on the thermophysical and compressive mechanical properties of Cu-Ni-Sn alloy manufactured by selective laser melting
YK Kim, SH Park, KA Lee
Materials Characterization 162, 110194, 2020
222020
系统目前无法执行此操作,请稍后再试。
文章 1–20