| Numerical study on the wall-impinging diesel spray mixture formation, ignition, and combustion characteristics in the cylinder under cold-start conditions of a diesel engine D Wang, Z Shi, Z Yang, H Chen, Y Li Fuel 317, 123518, 2022 | 28 | 2022 |
| Environment-adaptive method to control intake preheating for diesel engines at cold-start conditions Y Li, D Wang, Z Shi, H Chen, F Liu Energy 227, 120423, 2021 | 27 | 2021 |
| Experimental study of the effect of physical and chemical properties of alcohols on the spray combustion characteristics of alcohol-diesel blended fuels Z Yang, C Fei, Y Li, D Wang, C Sun Energy 263, 126158, 2023 | 21 | 2023 |
| Experimental study of wall-impinging diesel spray ignition and combustion characteristics under critical conditions D Wang, Z Shi, Z Yang, H Chen, M Wang, Y Li Fuel 308, 121976, 2022 | 17 | 2022 |
| Spray-wall interaction on n-dodecane spray combustion and soot formation under different wall temperatures D Wang, Z Shi, Y Li, Z Yang, H Chen, C Sun Fuel 337, 127180, 2023 | 8 | 2023 |
| Experimental investigation of transition process from LTC to ITC and HTC during diesel spray combustion at low ambient temperatures D Wang, J Zhang, Y Li, Z Yang, Z Shi, Y Lou Fuel 333, 126372, 2023 | 8 | 2023 |
| Numerical analysis of heat transfer between a wall and diesel spray: Effect on ignition characteristics D Wang, Z Shi, Z Yang, H Chen, M Wang, Y Li Fuel 334, 126595, 2023 | 7 | 2023 |
| Study on transient thermal state of steel piston in diesel engine under cold start condition Y Liu, J Lei, D Wang, X Deng, H Peng, J Wang, G Song Applied Thermal Engineering 244, 122744, 2024 | 4 | 2024 |
| Experimental and simulation study on heat transfer characteristics of aluminium alloy piston under transition conditions Y Liu, J Lei, D Wang, X Deng, J Wen, Z Wen Scientific Reports 12 (1), 9262, 2022 | 4 | 2022 |
| Influence analysis of piston structures on heat transfer and strength J WEN, J LEI, X DENG, D WANG, Z WEN, Z LI China Mechanical Engineering 30 (19), 2287, 2019 | 4 | 2019 |
| Study on oscillation heat transfer characteristics and position of cooling gallery 文均， 王东方， 雷基林， 李浙昆， 温志高， 代云辉， 辛千凡 China Mechanical Engineering 30 (6), 672-678, 2019 | 4 | 2019 |
| 活塞内冷油腔的振荡传热特性及位置的研究 文均， 王东方， 雷基林， 李浙昆， 温志高， 代云辉， 辛千凡 中国机械工程 30 (6), 672-678, 2019 | 4 | 2019 |
| Experimental investigation of a post-combustion pool fire phenomenon due to the spray-wall interaction under DI engine-like cold-start conditions D Wang, J Zhang, Y Li, Z Shi, Z Yang Energy 274, 127389, 2023 | 3 | 2023 |
| Investigation of the injection pressure impact on non-monotonic two-stage ignition delay of diesel engines under cold-start H Chen, Z Shi, Y Wu, Y Li, D Wang Applied Thermal Engineering 235, 121408, 2023 | 2 | 2023 |
| Experimental investigation on the spreading progress after droplets impacting on to a vertical vibrating plate at low frequencies Y Li, M Zhu, Z Yang, C Sun, D Wang, H Chen, Z Shi, G Wei Experimental Thermal and Fluid Science 147, 110949, 2023 | 2 | 2023 |
| Heat and mass transfer mechanistic investigation of wall intervention on spray ignition characteristics under aviation piston engine-like conditions D Wang, Q Ouyang, Y Li, J Lei, Y Lou, Z Shi, Z Yang Experimental Thermal and Fluid Science, 111247, 2024 | 1 | 2024 |
| Energy Conversion and Combustion Characteristics of Diesel and N-Alcohol Blends (N-Propanol to N-Hexanol) Under Low Ambient Temperature and Different Injection Pressures D Wang, Z Yang, Y Li, C Sun Combustion Science and Technology, 1-24, 2023 | 1 | 2023 |
| Influence mechanism of stagnation-point flow on liquid-phase spray penetration length under engine-like conditions D Wang, Z Yang, Y Li, C Cai, Z Shi Atomization and Sprays 33 (11), 2023 | 1 | 2023 |
| 稳定和过渡工况下柴油机活塞顶面瞬态热负荷变化规律 雷基林， 王东方， 邓晰文， 辛千凡， 文均 农业工程学报 34 (21), 65-73, 2018 | 1 | 2018 |
| A study on the co-optimization design method of diesel engine in-cylinder combustion performance and steel piston heat transfer characteristics: A new pit array combustion … Y Liu, J Lei, J Chen, D Wang, H Yang, G Song, Q Hou, H Zhao Applied Thermal Engineering 261, 125112, 2025 | | 2025 |
