Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP W Bednarczyk, M Wątroba, J Kawałko, P Bała Materials Science and Engineering: A 748, 357-366, 2019 | 116 | 2019 |
Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material M Wątroba, W Bednarczyk, J Kawałko, K Mech, M Marciszko, G Boelter, ... Materials & Design 183, 108154, 2019 | 75 | 2019 |
Achieving room temperature superplasticity in the Zn-0.5 Cu alloy processed via equal channel angular pressing W Bednarczyk, J Kawałko, M Wątroba, P Bała Materials Science and Engineering: A 723, 126-133, 2018 | 64 | 2018 |
Effect of zirconium microaddition on the microstructure and mechanical properties of Zn-Zr alloys M Wątroba, W Bednarczyk, J Kawałko, P Bała Materials Characterization 142, 187-194, 2018 | 63 | 2018 |
Abnormal grain growth in a Zn-0.8 Ag alloy after processing by high-pressure torsion W Bednarczyk, J Kawałko, B Rutkowski, M Wątroba, N Gao, MJ Starink, ... Acta Materialia 207, 116667, 2021 | 45 | 2021 |
Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8 Ag alloy processed by ECAP W Bednarczyk, M Wątroba, J Kawałko, P Bała Materials Science and Engineering: A 759, 55-58, 2019 | 43 | 2019 |
Microstructure and mechanical properties of a Zn-0.5 Cu alloy processed by high-pressure torsion W Bednarczyk, J Kawałko, M Wątroba, N Gao, MJ Starink, P Bała, ... Materials Science and Engineering: A 776, 139047, 2020 | 42 | 2020 |
Fine-tuning of mechanical properties in a Zn–Ag–Mg alloy via cold plastic deformation process and post-deformation annealing M Wątroba, W Bednarczyk, J Kawałko, P Bała Bioactive materials 6 (10), 3424-3436, 2021 | 36 | 2021 |
Effect of high-temperature exposure on the microstructure and mechanical properties of the Al5Ti5Co35Ni35Fe20 high-entropy alloy P Bała, K Górecki, W Bednarczyk, M Wątroba, S Lech, J Kawałko Journal of Materials Research and Technology 9 (1), 551-559, 2020 | 34 | 2020 |
Long-term in vitro corrosion behavior of Zn-3Ag and Zn-3Ag-0.5 Mg alloys considered for biodegradable implant applications M Wątroba, K Mech, W Bednarczyk, J Kawałko, M Marciszko-Wiąckowska, ... Materials & Design 213, 110289, 2022 | 33 | 2022 |
A novel high-strength Zn-3Ag-0.5 Mg alloy processed by hot extrusion, cold rolling, or high-pressure torsion M Wątroba, W Bednarczyk, J Kawałko, S Lech, K Wieczerzak, ... Metallurgical and Materials Transactions A 51, 3335-3348, 2020 | 31 | 2020 |
Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy K Górecki, P Bała, W Bednarczyk, J Kawałko Materials Science and Engineering: A 745, 346-352, 2019 | 26 | 2019 |
In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay M Wątroba, W Bednarczyk, PK Szewczyk, J Kawałko, K Mech, ... Journal of Biomedical Materials Research Part B: Applied Biomaterials 111 (2 …, 2023 | 21 | 2023 |
The effect of reduced temperatures on microstructure development in tensile tested high-manganese steel J Kowalska, J Ryś, G Cios, W Bednarczyk Materials Science and Engineering: A 767, 138406, 2019 | 15 | 2019 |
Dynamic recrystallization and deformation behavior of an extruded Zn-0.2 Mg biodegradable alloy N Mollaei, SM Fatemi, MR Aboutalebi, SH Razavi, W Bednarczyk Journal of Materials Research and Technology 19, 4969-4985, 2022 | 13 | 2022 |
The γ′-Ni3 (Al, Ta) phase triggered strengthening of the Ni-Ta-Al-Cr-C coating layer, deposited on austenitic stainless steel K Wieczerzak, M Watroba, W Bednarczyk, M Madej, M Marzec, T Tokarski, ... Materials Characterization 129, 367-377, 2017 | 12 | 2017 |
Multiscale model of heating-remelting-cooling in the Gleeble 3800 thermo-mechanical simulator system M Hojny, M Głowacki, P Bała, W Bednarczyk, W Zalecki Archives of Metallurgy and Materials 64 (1), 2019 | 8 | 2019 |
Determination of critical resolved shear stresses associated with< a> slips in pure Zn and Zn-Ag alloys via micro-pillar compression W Bednarczyk, M Wątroba, M Jain, K Mech, P Bazarnik, P Bała, J Michler, ... Materials & Design 229, 111897, 2023 | 7 | 2023 |
Effect of GA+ ion beam on the stability of retained austenite in high carbon steel P Bała, M Gajewska, G Cios, J Kawałko, M Wątroba, W Bednarczyk, ... Materials Characterization 186, 111766, 2022 | 7 | 2022 |
Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion W Bednarczyk, M Wątroba, G Cieślak, M Ciemiorek, K Hamułka, ... Materials Science and Engineering: A 892, 146027, 2024 | 1 | 2024 |