Additive manufacturing of steels: a review of achievements and challenges N Haghdadi, M Laleh, M Moyle, S Primig Journal of Materials Science 56, 64-107, 2021 | 397 | 2021 |
A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction K Babinsky, R De Kloe, H Clemens, S Primig Ultramicroscopy 144, 9-18, 2014 | 132 | 2014 |
Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting H Wang, ZG Zhu, H Chen, AG Wang, JQ Liu, HW Liu, RK Zheng, SML Nai, ... Acta Materialia 196, 609-625, 2020 | 108 | 2020 |
On the recrystallization behavior of technically pure molybdenum S Primig, H Leitner, H Clemens, A Lorich, W Knabl, R Stickler International Journal of Refractory Metals and Hard Materials 28 (6), 703-708, 2010 | 106 | 2010 |
Origin of high temperature oxidation resistance of Ti–Al–Ta–N coatings R Hollerweger, H Riedl, J Paulitsch, M Arndt, R Rachbauer, P Polcik, ... Surface and Coatings Technology 257, 78-86, 2014 | 103 | 2014 |
On conventional versus direct ageing of Alloy 718 F Theska, A Stanojevic, B Oberwinkler, SP Ringer, S Primig Acta Materialia 156, 116-124, 2018 | 99 | 2018 |
Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis S Primig, H Leitner Thermochimica acta 526 (1-2), 111-117, 2011 | 73 | 2011 |
On the early stages of precipitation during direct ageing of Alloy 718 F Theska, K Nomoto, F Godor, B Oberwinkler, A Stanojevic, SP Ringer, ... Acta Materialia 188, 492-503, 2020 | 72 | 2020 |
Morphology change of retained austenite during austempering of carbide-free bainitic steel C Hofer, F Winkelhofer, H Clemens, S Primig Materials Science and Engineering: A 664, 236-246, 2016 | 71 | 2016 |
Structural characterization of “carbide-free” bainite in a Fe–0.2 C–1.5 Si–2.5 Mn steel C Hofer, H Leitner, F Winkelhofer, H Clemens, S Primig Materials characterization 102, 85-91, 2015 | 69 | 2015 |
Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment N Haghdadi, C Ledermueller, H Chen, Z Chen, Q Liu, X Li, G Rohrer, ... Materials Science and Engineering: A 835, 142695, 2022 | 68 | 2022 |
How grain boundary chemistry controls the fracture mode of molybdenum K Leitner, D Scheiber, S Jakob, S Primig, H Clemens, ... Materials & Design 142, 36-43, 2018 | 67 | 2018 |
Experimental and numerical investigations of the γ ″and γ′ precipitation kinetics in Alloy 718 A Drexler, B Oberwinkler, S Primig, C Turk, E Povoden-Karadeniz, ... Materials Science and Engineering: A 723, 314-323, 2018 | 64 | 2018 |
On grain boundary segregation in molybdenum materials K Leitner, PJ Felfer, D Holec, J Cairney, W Knabl, A Lorich, H Clemens, ... Materials & Design 135, 204-212, 2017 | 60 | 2017 |
Electron and laser-based additive manufacturing of Ni-based superalloys: a review of heterogeneities in microstructure and mechanical properties NK Adomako, N Haghdadi, S Primig Materials & Design 223, 111245, 2022 | 56 | 2022 |
Grain boundary character distribution in an additively manufactured austenitic stainless steel M Laleh, AE Hughes, MY Tan, GS Rohrer, S Primig, N Haghdadi Scripta Materialia 192, 115-119, 2021 | 54 | 2021 |
Atom probe study of grain boundary segregation in technically pure molybdenum K Babinsky, J Weidow, W Knabl, A Lorich, H Leitner, S Primig Materials characterization 87, 95-103, 2014 | 54 | 2014 |
The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt M Maric, O Muránsky, I Karatchevtseva, T Ungár, J Hester, A Studer, ... Corrosion Science 142, 133-144, 2018 | 53 | 2018 |
Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V PL Stephenson, N Haghdadi, R DeMott, XZ Liao, SP Ringer, S Primig Additive Manufacturing 36, 101581, 2020 | 52 | 2020 |
Correlating atom probe crystallographic measurements with transmission Kikuchi diffraction data AJ Breen, K Babinsky, AC Day, K Eder, CJ Oakman, PW Trimby, S Primig, ... Microscopy and Microanalysis 23 (2), 279-290, 2017 | 52 | 2017 |