| Disk drive magnetic read head with affixed and recessed laser device H Panitchakan, K Nontprasat, P Naksakul, C Pakpum US Patent 8,665,677, 2014 | 38 | 2014 |
| Method and system for fabricating a cavity in a substrate of a magnetic recording head C Pakpum, L Supadee US Patent 8,343,363, 2013 | 36 | 2013 |
| An X-ray Photoelectron Spectroscopy Investigation of Re- deposition from Fluorine-based Plasma Etch on Magnetic Recording Slider Head Substrate A Limcharoen, C Pakpum, P Limsuwan Procedia Engineering 32, 1043-1049, 2012 | 26 | 2012 |
| Characterisation of C–F Polymer Film Formation on the Air‐Bearing Surface Etched Sidewall of Fluorine‐Based Plasma Interacting with AL2O3–TiC Substrate A Limcharoen, P Limsuwan, C Pakpum, K Siangchaew Journal of Nanomaterials 2013 (1), 851489, 2013 | 13 | 2013 |
| Design of experiments for (100) Si vertical wall wet etching using sonicated NaOH solution C Pakpum, N Pussadee Applied Mechanics and Materials 804, 12-15, 2015 | 9 | 2015 |
| Deep reactive ion etching of alumina titanium carbide using chlorine-based plasma C Pakpum, N Pussadee Surface and Coatings Technology 306, 194-199, 2016 | 8 | 2016 |
| A polymer-rich re-deposition technique for non-volatile etching by-products in reactive ion etching systems A Limcharoen, C Pakpum, P Limsuwan Chinese Physics Letters 30 (7), 075202, 2013 | 8 | 2013 |
| Redeposition-free of silicon etching by CF4 microwave plasma in a medium vacuum process regime C Pakpum, D Boonyawan Surface and Coatings Technology 397, 126018, 2020 | 5 | 2020 |
| Preparation of copper thin film mask by sputtering technique assisted by polymer mask photolithography C Pakpum IOP Conference Series: Materials Science and Engineering 213 (1), 012023, 2017 | 5 | 2017 |
| A deep AlTiC dry etching for fabrication of Burnish and Glide slider head C Pakpum, P Limsuwan Procedia Engineering 32, 1037-1042, 2012 | 5 | 2012 |
| Fabrication of DLC nanoparticle clusters by μ-wave oven based plasma reactor with acetylene diluted in air precursor C Pakpum, K Kanchiang Applied Surface Science 458, 100-110, 2018 | 4 | 2018 |
| Low-Cost Sputtering Process for Carbon Nanotubes Synthesis T Thurakitseree, C Pakpum Applied Mechanics and Materials 891, 195-199, 2019 | 3 | 2019 |
| Wet etching technique to reduce pyramidal hillocks for anisotropic silicon etching in NaOH/IPA solution C Pakpum Key Engineering Materials 659, 681-685, 2015 | 3 | 2015 |
| Demonstration of modification from AlF3 re-deposition to polymer re-deposition on Air Bearing Surface (ABS) Etched Sidewall of Fluorine-Based Plasma Etch on Al2O3-TiC Substrate C Pakpum, K Siangchaew, P Limsuwan Advanced Materials Research 213, 93-97, 2011 | 3 | 2011 |
| Wall angle control of reactive ion etched features on a silicon substrate A Limcharoen, C Pakpum, K Leksakul 2010 3rd International Nanoelectronics Conference (INEC), 158-159, 2010 | 3 | 2010 |
| An alternative design of light delivery system for heat-assisted magnetic recording A Limcharoen, C Pakpum, N Witit-Anun, S Chaiyakun, P Limsuwan Applied Mechanics and Materials 217, 712-716, 2012 | 2 | 2012 |
| Air bearing surface recessed steep wall via optical proximity correction mask and fluorine-based plasma etching C Pakpum, N Pussadee Surface and Coatings Technology 306, 299-304, 2016 | 1 | 2016 |
| An XRD Phase Analysis of Al-F Re-Deposition Produced from Reactive Ion Etching C Pakpum Key Engineering Materials 659, 575-579, 2015 | 1 | 2015 |
| Feasibility to fabricate the 45° slant with anisotropic silicon etching in NaOH solution A Limcharoen, C Pakpum, P Limsuwan Advanced Materials Research 503, 615-619, 2012 | 1 | 2012 |
| Diamond-like carbon formed by plasma immersion ion implantation and deposition technique on 304 stainless steel C Pakpum, N Pasaja, P Suanpoot, D Boonyawan, P Srisantithum, ... Solid State Phenomena 107, 129-132, 2005 | 1 | 2005 |
