| Effect of retained austenite on impact toughness and fracture behavior of medium carbon submicron-structured bainitic steel SB Zhou, F Hu, W Zhou, L Cheng, CY Hu, KM Wu Journal of Materials Research and Technology 14, 1021-1034, 2021 | 56 | 2021 |
| Insight into the impact of microstructure on crack initiation/propagation behavior in carbide-free bainitic steel during tensile deformation S Zhou, C Hu, F Hu, L Cheng, O Isayev, S Yershov, H Xiang, K Wu Materials Science and Engineering: A 846, 143175, 2022 | 23 | 2022 |
| Ultrafine Pearlitic Transformation Behavior of 2000 MPa Ultra‐High‐Strength Steel Wire Under Nb Microalloying J Zhou, F Hu, KM Wu, L Feng, D Zhang, SB Zhou steel research international 92 (4), 2000516, 2020 | 15 | 2020 |
| A study of deformation behavior and stability of retained austenite in carbide-free bainitic steel during nanoindentation process S Zhou, F Hu, K Wang, C Hu, H Dong, X Wan, S Cheng, RDK Misra, K Wu Journal of Materials Research and Technology 20, 2221-2234, 2022 | 14 | 2022 |
| Ultrahigh impact toughness achieved in high strength bainitic ferrite/retained austenite lamellar steels below-Mf temperature K Wang, F Hu, S Zhou, O Isayev, S Yershov, Z Zhang, K Wu Materials Letters 324, 132517, 2022 | 10 | 2022 |
| Investigation of microstructural evolution and crack extension in a quenching and partitioning (Q & P) steel at different strain rates S Zhang, W Zhou, S Zhou, F Hu, S Yershov, K Wu Journal of Materials Research and Technology 24, 2385-2402, 2023 | 9 | 2023 |
| Effect of microstructure transformation below MS temperature in bainitic steels on the impact-abrasive wear behavior K Wang, F Hu, S Zhou, W Zhou, Z Zhang, S Yershov, K Wu Wear 514, 204589, 2023 | 7 | 2023 |
| Microstructural evolution and ultra-high impact toughness of austempered lamellar bainitic steel far below Ms temperature K Wang, F Hu, S Zhou, W Zhou, C Hu, S Yershov, K Wu Journal of Materials Research and Technology 24, 5449-5462, 2023 | 6 | 2023 |
| Nanomechanics of retained austenite in medium-carbon low-temperature bainitic steel: A critical analysis of a one-step versus a two-step treatment S Zhou, F Hu, K Wang, C Hu, W Zhou, S Yershov, K Wu, Z Zhang, X Pan Materials 15 (17), 5996, 2022 | 6 | 2022 |
| 盾构机滚刀刀具用钢研究现状及进展 向源， 胡锋， 周雯， 吴开明， 周松波 钢铁研究学报 33 (2), 91-102, 2021 | 4 | 2021 |
| Impacts of Nb on grain refinement in a simulated coarse-grained-heat-affected-zone of ultra-high-strength steels L Wang, C Hu, X Wan, S Zhou, R Wei, C Zhu, G Li, K Wu Science and Technology of Welding and Joining 28 (7), 608-618, 2023 | 3 | 2023 |
| 中碳贝氏体钢拉伸变形中裂纹形成及扩展机制分析 周松波 钢铁研究学报, 2022 | 2 | 2022 |
| 块状组织细化对贝氏体钢断裂行为的影响 周松波， 胡锋， 尹朝朝， 吴开明 钢铁 55 (11), 0-0, 2020 | 2 | 2020 |
| Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel K Wang, F Hu, Y Ling, X Wan, S Zhou, S Yershov, K Wu Vacuum 216, 112465, 2023 | 1 | 2023 |
| Grain Refinement Mechanism in the CGHAZ of Ultra-High-Strength Structural Steel: A Critical Analysis of the Impacts of Prior Austenite Grain and Cooling Rates L Wang, C Hu, S Li, X Wan, M Zhong, F Hu, S Zhou, G Li, K Wu JOM, 1-15, 2024 | | 2024 |
| Insights into the strain rate on microstructure evolution of carbide‐free bainitic steel S Zhou, W Zhou, W Liao, C Hu, F Hu, K Wang, H Dong, K Wu steel research international, 2022 | | 2022 |
| 30 GPa·% 级中碳贝氏体钢中残余奥氏体的调控机理 严恒， 胡锋， 王坤， 周松波， 周雯， 吴开明 中国冶金 31 (7), 22-29, 2021 | | 2021 |
| 马氏体亚结构对 F690 超厚板表层强韧性能的影响 尹朝朝， 张莉芹， 胡锋， 周松波， 周雯， 吴开明 钢铁 56 (7), 129-138, 2021 | | 2021 |
| 奥氏体组织对低碳中锰钢冷弯性能的影响 周松波， 胡锋， 吴亚杰， 万响亮， 吴开明， 谢兴 钢铁研究学报 32 (11), 990-999, 2020 | | 2020 |
| 高碳贝氏体钢的低温转变组织与性能 吴亚杰， 周松波， 吴开明 钢铁研究学报 31 (12), 1058-1064, 2019 | | 2019 |
Chengyang Hu（胡丞杨）Wuhan University of Science and Technology在 wust.edu.cn 的电子邮件经过验证
Chengyang Hu（胡丞杨）Wuhan University of Science and Technology在 wust.edu.cn 的电子邮件经过验证
R.D.K. MisraUniversity of Texas at El Paso在 utep.edu 的电子邮件经过验证