Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion L Zhou, H Pan, H Hyer, S Park, Y Bai, B McWilliams, K Cho, Y Sohn Scripta Materialia 158, 24-28, 2019 | 193 | 2019 |
Microstructure and mechanical properties of Zr-modified aluminum alloy 5083 manufactured by laser powder bed fusion L Zhou, H Hyer, S Park, H Pan, Y Bai, KP Rice, Y Sohn Additive Manufacturing 28, 485-496, 2019 | 148 | 2019 |
Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion H Hyer, L Zhou, A Mehta, S Park, T Huynh, S Song, Y Bai, K Cho, ... Acta Materialia 208, 116698, 2021 | 136 | 2021 |
Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion A Mehta, L Zhou, T Huynh, S Park, H Hyer, S Song, Y Bai, DD Imholte, ... Additive Manufacturing 41, 101966, 2021 | 131 | 2021 |
Understanding the laser powder bed fusion of AlSi10Mg alloy H Hyer, L Zhou, S Park, G Gottsfritz, G Benson, B Tolentino, B McWilliams, ... Metallography, Microstructure, and Analysis 9, 484-502, 2020 | 98 | 2020 |
Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property L Zhou, T Huynh, S Park, H Hyer, A Mehta, S Song, Y Bai, B McWilliams, ... Journal of Materials Science 55, 14611-14625, 2020 | 69 | 2020 |
An integrated computational materials engineering-anchored closed-loop method for design of aluminum alloys for additive manufacturing S Thapliyal, M Komarasamy, S Shukla, L Zhou, H Hyer, S Park, Y Sohn, ... Materialia 9, 100574, 2020 | 67 | 2020 |
Numerical simulation of high-pressure gas atomization of two-phase flow: Effect of gas pressure on droplet size distribution KH Arachchilage, M Haghshenas, S Park, L Zhou, Y Sohn, B McWilliams, ... Advanced Powder Technology 30 (11), 2726-2732, 2019 | 47 | 2019 |
Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion H Hyer, L Zhou, S Park, T Huynh, A Mehta, S Thapliyal, RS Mishra, ... Journal of Materials Science & Technology 103, 50-58, 2022 | 30 | 2022 |
Microstructural development in inconel 718 nickel-based superalloy additively manufactured by laser powder bed fusion T Huynh, A Mehta, K Graydon, J Woo, S Park, H Hyer, L Zhou, DD Imholte, ... Metallography, Microstructure, and Analysis, 1-20, 2022 | 25 | 2022 |
Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion, Addit. Manuf. 41 (2021 … A Mehta, L Zhou, T Huynh, S Park, H Hyer, S Song, Y Bai, DD Imholte, ... | 15 | 2021 |
Microstructural development in Inconel 718 nickel-based superalloy additively manufactured by laser powder bed fusion. Metallogr Microstruct Anal 11: 88–107 T Huynh, A Mehta, K Graydon, J Woo, S Park, H Hyer, L Zhou, DD Imholte, ... | 10 | 2022 |
Understanding the Laser Powder Bed Fusion of AlSi10Mg Alloy, Metallogr. Microstruct. Anal. 9 (2020) 484–502 H Hyer, L Zhou, S Park, G Gottsfritz, G Benson, B Tolentino, B McWilliams, ... | 8 | |
Investigation of Microstructure and Dispersoids/Precipitates in Additively Manufactured Aluminum Alloys L Zhou, H Hyer, S Park, Y Sohn, KP Rice, Y Chen Microscopy and Microanalysis 25 (S2), 328-329, 2019 | 2 | 2019 |
Optimization Studies for the Gas Atomization and Selective Laser Melting Processes of Al10SiMg alloy S Park | 1 | 2020 |
IMS Announces Winner of 2022 IMS Buehler Technical Paper Award T Huynh, A Mehta, K Graydon, J Woo, SPHH Le Zhou, DD Imholte, ... | | 2023 |
Additive manufacturing with feedstock gas atomized in a shipping container from scrap steel. M Pepi, B McWilliams, A Kudzal, J Yu, M Charles, C Eonta, A LaTour, ... International Journal of COMADEM 24 (4), 2021 | | 2021 |