Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling F Ahmed, K Bayerlein, SM Rosiwal, M Göken, K Durst Acta materialia 59 (14), 5422-5433, 2011 | 94 | 2011 |
Stress corrosion failure of high-pressure gas pipeline F Hasan, J Iqbal, F Ahmed Engineering Failure Analysis 14 (5), 801-809, 2007 | 83 | 2007 |
Stress Corrosion Failure of an X52 Grade Gas Pipeline B Saleem, F Ahmed, MA Rafiq, M Ajmal, L Ali Engineering Failure Analysis 46, 157-165, 2014 | 68 | 2014 |
Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and Cohesive Zone FEM modeling H Rehman, F Ahmed, C Schmid, J Schaufler, K Durst Surface and Coatings Technology 207, 163-169, 2012 | 62 | 2012 |
Thermal stability of carbon nanotubes, fullerene and graphite under spark plasma sintering F Zhang, C Mihoc, F Ahmed, C Lathe, E Burkel Chemical physics letters 510 (1-3), 109-114, 2011 | 47 | 2011 |
In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy F Ahmed, K Durst, S Rosiwal, J Fandrey, J Schaufler, M Göken Surface and Coatings Technology 204 (6-7), 1022-1025, 2009 | 37 | 2009 |
Effect of microwave curing on the construction properties of natural soil based geopolymer foam M Nadeem, EU Haq, F Ahmed, MA Rafiq, GH Awan, M Zain-ul-Abdein Construction and Building Materials 230, 117074, 2020 | 34 | 2020 |
Growth of diamond from fullerene C60 by spark plasma sintering F Zhang, F Ahmed, G Holzhüter, E Burkel Journal of Crystal Growth 340 (1), 1-5, 2012 | 32 | 2012 |
Pulsed electric field induced diamond synthesis from carbon nanotubes with solvent catalysts F Zhang, M Adam, F Ahmed, E Otterstein, E Burkel Diamond and related Materials 20 (5-6), 853-858, 2011 | 26 | 2011 |
Effect of Coating-thickness on the Formability of Hot Dip Aluminized Steel GH Awan, F Ahmed, L Ali, MS Shuja, F Hasan Pak. J. Engg. & Appl. Sci. Vol 2, 14-21, 2008 | 23 | 2008 |
Characterization of phases in an as-cast copper-manganese-aluminum alloy J Iqbal, F Hasan, F Ahmad Journal of Materials Science and Technology 22 (6), 779-784, 2006 | 23 | 2006 |
High performance and remarkable cyclic stability of a nanostructured RGO–CNT-WO3 supercapacitor electrode F Nasreen, AW Anwar, A Majeed, MA Ahmad, U Ilyas, F Ahmad RSC advances 12 (18), 11293-11302, 2022 | 18 | 2022 |
Improved water retention and positive behavior of silica based geopolymer utilizing granite powder M Nadeem, S Ilyas, EU Haq, F Ahmed, M Zain-ul-Abdein, MRA Karim, ... Silicon 14, 2337–2349, 2022 | 16 | 2022 |
Diamond synthesis through the generation of plasma during spark plasma sintering F Zhang, F Ahmed, J Bednarcik, E Burkel Physica Status Solidi A 209 (11), 2241-2246, 2012 | 15 | 2012 |
Impedance analysis and conduction mechanism of Ba doped Mn1.75Ni0.7Co0.52xCu0.05O4 NTC thermistors MA Rafiq, T Khan, QK Muhammad, M Waqar, F Ahmed Applied Physics A 123, 589-596, 2017 | 13 | 2017 |
Development of Microstructure in Silicon-Aluminum-Bronze J Iqbal, F Ahmed, F Hasan Pak. J. Engg. & Appl. Sci. Vol 3, 47-53, 2008 | 11 | 2008 |
Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy F Ahmed, M Krottenthaler, C Schmid, K Durst Surface and Coatings Technology 237, 255-260, 2013 | 10 | 2013 |
Improved compressive strength and fracture toughness analysis of natural soil based geopolymer M Nadeem, F Ahmed, EU Haq, M Zain-ul-Abdein, A Raza, U Afzal, S Bibi, ... Journal of Building Engineering 44, 103241, 2021 | 8 | 2021 |
Hot corrosion behavior of double ceramic layered CaZrO3/Yttria stabilized zirconia (YSZ) coatings N Ejaz, L Ali, F Ahmed, GH Awan, KM Ghauri, A Nusair International Journal of Applied Ceramic Technology 15 (1), 53-62, 2018 | 8 | 2018 |
Characterization and Wear Behavior of Heat-treated Ni3Al Coatings Deposited by Air Plasma Spraying K Mehmood, MA Rafiq, AN Khan, F Ahmed, MM Rauf Journal of Materials Engineering and Performance 25 (7), 2752-2760, 2016 | 8 | 2016 |