| Metal additive manufacturing in aerospace: A review B Blakey-Milner, P Gradl, G Snedden, M Brooks, J Pitot, E Lopez, M Leary, ... Materials & Design 209, 110008, 2021 | 1224 | 2021 |
| The application of non-axisymmetric endwall contouring in a single stage, rotating turbine G Snedden, D Dunn, G Ingram, D Gregory-Smith Turbo Expo: Power for Land, Sea, and Air 48883, 831-840, 2009 | 63 | 2009 |
| The performance of a generic non-axisymmetric end wall in a single stage, rotating turbine at on and off-design conditions G Snedden, D Dunn, G Ingram, D Gregory-Smith Turbo Expo: Power for Land, Sea, and Air 44021, 1069-1080, 2010 | 59 | 2010 |
| Turbulence model comparisons for a low pressure 1.5 stage test turbine DI Dunn, GC Snedden, TW Von Backström | 18 | 2009 |
| Unsteady Effects of a Generic Non-Axisymmetric Endwall Contour on the Rotor of a 1½ Stage Low Speed Turbine Test Rig D Dunn, G Snedden, T von Backström, MP Mdluli Turbo Expo: Power for Land, Sea, and Air 55249, V06CT42A024, 2013 | 17 | 2013 |
| The Application of Non-Axisymmetric Endwall Contouring in a 1½ Stage, Rotating Turbine G SNEDDEN Durham University, 2011 | 16 | 2011 |
| Significance of residual stresses in fatigue life prediction of micro gas turbine blades U Ramakokovhu, D Desai, G Snedden, T Jamiru Engineering failure analysis 120, 105092, 2021 | 15 | 2021 |
| Characterisation of a refurbished 1½ stage turbine test rig for flowfield mapping behind blading with non-axisymmetric contoured endwalls GC Snedden, TH Roos, DI Dunn, D Gregory-Smith American Institute of Aeronautics and Astronautics, 2007 | 14 | 2007 |
| & du Plessis, A.(2021). Metal additive manufacturing in aerospace: A review B Blakey-Milner, P Gradl, G Snedden, M Brooks, J Pitot, E Lopez Materials & Design 209, 110008, 0 | 13 | |
| Optimization of Non-axisymmetric Endwall Contours for the Rotor of a Low Speed, -Stage Research Turbine With Unshrouded Blades—Optimization and … J Bergh, G Snedden, D Dunn Journal of turbomachinery 142 (4), 041006, 2020 | 12 | 2020 |
| Optimization of non-axisymmetric end wall contours for the rotor of a low speed, 1 1/2 stage research turbine with unshrouded blades J Bergh, G Snedden, C Meyer Turbo Expo: Power for Land, Sea, and Air 44748, 1153-1165, 2012 | 12 | 2012 |
| Observations on the selection of objective function for the optimisation of turbine endwalls using computational fluid dynamics GC Snedden, DI Dunn, TW Von Backström, G Ingram South African Conference on Computational and Applied Mechanics, 2010 | 10 | 2010 |
| Unsteady effects of a generic non-axisymmetric rotor endwall contour on a 1½ stage turbine test rig at off design conditions D Dunn, G Snedden, T von Backström Turbo Expo: Power for Land, Sea, and Air 45639, V02DT44A009, 2014 | 8 | 2014 |
| The spinning pipe gas lens revisited C Mafusire, A Forbes, G Snedden, MM Michaelis South African Journal of Science 104 (7), 260-264, 2008 | 8 | 2008 |
| Optical aberrations in a spinning pipe gas lens C Mafusire, A Forbes, MM Michaelis, GC Snedden Optics Express 16 (13), 9850-9856, 2008 | 8 | 2008 |
| Detailed disc assembly temperature prediction: comparison between CFD and simplified engineering methods GC Snedden, TH Roos, K Naidoo | 8 | 2003 |
| Effect of laser shock peening on fatigue life at stress raiser regions of a high-speed micro gas turbine shaft: A simulation based study JG Pretorius, DA Desai, GC Snedden International Journal of Engineering Research in Africa 45, 15-27, 2019 | 7 | 2019 |
| The development of an air injection system for the forced response testing of axial compressors E Wegman, G Snedden, SJ Van der Spuy, F Holzinger, HP Schiffer, ... Turbo Expo: Power for Land, Sea, and Air 55270, V07BT33A014, 2013 | 7 | 2013 |
| Three-component particle image velocimetry in a generic can-type gas turbine combustor BC Meyers, GC Snedden, JP Meyer, TH Roos, GI Mahmood Proceedings of the Institution of Mechanical Engineers, Part A: Journal of …, 2012 | 6 | 2012 |
| Experimental investigation into the unsteady effects on non-axisymmetric turbine endwall contouring DI Dunn, GC Snedden, TW Von Backström South African Conference on Computational and Applied Mechanics, 2010 | 6 | 2010 |
Michael BrooksAssociate Professor - University of KwaZulu-Natal在 ukzn.ac.za 的电子邮件经过验证
