| Influence of process parameters on residual stresses in deep-drawing process with FEM and experimental evaluations M Kardan, A Parvizi, A Askari Journal of the Brazilian Society of Mechanical Sciences and Engineering 40, 1-12, 2018 | 25 | 2018 |
| Rheological investigation and injection optimization of Fe–2Ni–2Cu feedstock for metal injection molding process A Askari, V Momeni Materials Chemistry and Physics 271, 124926, 2021 | 21 | 2021 |
| The effect of powder loading and binder system on the mechanical, rheological and microstructural properties of 4605 powder in MIM process V Momeni, A Askari, MH Alaei, AH Rahimi, K Nekouee, H Zangi Transactions of the Indian Institute of Metals 72, 1245-1254, 2019 | 19 | 2019 |
| Experimental and finite element results for optimization of punch force and thickness distribution in deep drawing process M Kardan, A Parvizi, A Askari Arabian Journal for Science and Engineering 43, 1165-1175, 2018 | 17 | 2018 |
| Investigating the effect of stearic acid on the mechanical, rheological, and microstructural properties of AISI 4605 feedstock for metal injection molding process V Momeni, A Askari, MH Allaei, H Zangi Transactions of the Indian Institute of Metals 74 (9), 2161-2170, 2021 | 13 | 2021 |
| Effect of carnauba wax as a part of feedstock on the mechanical behavior of a part made of 4605 low alloy steel powder using metal injection molding V Momeni, M Hossein Alaei, A Askari, A Hossein Rahimi, K Nekouee Materialwissenschaft und Werkstofftechnik 50 (4), 432-441, 2019 | 12 | 2019 |
| Effect of the fraction of steel 4605 powder in the load in injection molding with the use of a polymer-based binder V Momeni, MH Alaei, A Askari, AH Rahimi, K Nekouee Metal Science and Heat Treatment 61, 777-781, 2020 | 10 | 2020 |
| Rheological and thermal characterization of AISI 4605 low-alloy steel feedstock for metal injection molding process A Askari, MH Alaei, A Mehdipoor Omrani, K Nekouee, SJ Park Metals and Materials International 26, 1820-1829, 2020 | 8 | 2020 |
| The effect of debinding and sintering parameters on the mechanical and microstructural properties of Fe-2Ni metal injection molded compacts A Askari, MH Alaei, K Nekouee, AM Omrani, SJ Park Materials Research Express 6 (11), 1165e8, 2019 | 7 | 2019 |
| Air fuel ratio control in spark injection engines based on neural network and model predictive controller J Abdi, AF Khalili, K Inanlosaremi, A Askari 2011 Australian Control Conference, 142-147, 2011 | 4 | 2011 |
| Critical Powder Volume Concentration (CPVC) of Fe-2Ni low-Alloy Steel Powder and Selection of a Proper Binder System from Rheological Point of View in order to Metal Injection … A Askari, M Alaei, A Mehdipoor Omrani, K Nekouee Modares Mechanical Engineering 20 (4), 1079-1088, 2020 | 1 | 2020 |
| The Effect of Corrosion Intensity on Damage Metric in Impedance-Based Structural Health Monitoring of an Aluminum Cantilever Beam A Askari, F Hajami, V Enjilela Journal of Environmental Friendly Materials 6 (2), 9-17, 2022 | | 2022 |
| Masoud Kardan, Ali Parvizi & Ali Askari AJS Eng | | |
kh. a. nekoueeMUT在 sut.ac.ir 的电子邮件经过验证
