Parametric Study of 3D Additive Printing Parameters Using Conductive Filaments on Microwave Topologies F Pizarro, R Salazar, E Rajo-Iglesias, M Rodriguez, S Fingerhuth, ... IEEE Access 7 (1), 106813-106822, 2019 | 64 | 2019 |
Easy-to-Build Textile Pressure Sensor F Pizarro, P Villavicencio, D Yunge, M Rodríguez, G Hermosilla, A Leiva Sensors 18 (4), 1190, 2018 | 62 | 2018 |
Two-dimensional glide-symmetric dielectric structures for planar graded-index lens antennas JM Poyanco, O Zetterstrom, P Castillo-Tapia, NJG Fonseca, F Pizarro, ... IEEE Antennas and Wireless Propagation Letters 20 (11), 2171-2175, 2021 | 41 | 2021 |
Cost-effective wideband dielectric planar lens antenna for millimeter wave applications JM Poyanco, F Pizarro, E Rajo-Iglesias Scientific Reports 12 (1), 4204, 2022 | 36 | 2022 |
3D-Printing for Transformation Optics in Electromagnetic High-Frequency Lens Applications JM Poyanco, F Pizarro, E Rajo-Iglesias Materials 13 (12), 2020 | 35 | 2020 |
Parametric Study of a Fully 3D-Printed Dielectric Resonator Antenna Loaded With a Metallic Cap M Cuevas, F Pizarro, A Leiva, G Hermosilla, D Yunge IEEE Access 9, 73771-73779, 2021 | 30 | 2021 |
Comparison study of 4× 4 Butler matrices in microstrip technologies for Ka-band F Pizarro, D Ramirez-Gil, A Algaba-Brazalez, LF Herrán-Ontanón, ... AEU-International Journal of Electronics and Communications 122, 153248, 2020 | 23 | 2020 |
Non-thermal plasma potentialities for microwave device reconfigurability J Sokoloff, O Pascal, T Callegari, R Pascaud, F Pizarro, L Liard, J Lo, ... Comptes Rendus Physique 15 (5), 468-478, 2014 | 21 | 2014 |
Wideband hyperbolic flat lens in the Ka-band based on 3D-printing and transformation optics JM Poyanco, F Pizarro, E Rajo-Iglesias Applied Physics Letters 118 (12), 123503, 2021 | 19 | 2021 |
Analysis of Periodic Structures Made of Pins Inside a Parallel Plate Waveguide N Memeletzoglou, C Sanchez Cabello, F Pizarro Torres, E Rajo Iglesias Symmetry 11 (4), 2019 | 17 | 2019 |
Assessment of 3D-printed waveguides using conductive filaments and a chloroform-based smoothing process R Salazar, F Pizarro, D Vasquez, E Rajo-Iglesias Additive Manufacturing 51, 102593, 2022 | 16 | 2022 |
3D-Printed Sievenpiper Metasurface Using Conductive Filaments P Stuardo, F Pizarro, E Rajo-Iglesias Materials 13 (11), 2020 | 15 | 2020 |
Considerations of impedance sensitivity and losses in designing inverted microstrip gap waveguides F Pizarro, C Sánchez-Cabello, JL Vazquez-Roy, E Rajo-Iglesias AEU-International Journal of Electronics and Communications 124, 153353, 2020 | 14 | 2020 |
3D-printed dielectric GRIN planar wideband lens antenna for 5G applications JM Poyanco, F Pizarro, E Rajo-Iglesias 2021 15th European Conference on Antennas and Propagation (EuCAP), 1-4, 2021 | 13 | 2021 |
Low insertion loss microplasma-based limiter integrated into a microstrip bandpass filter R Pascaud, F Pizarro, T Callegari, L Liard, O Pigaglio, O Pascal Electronics Letters 51 (14), 1090-1092, 2015 | 11 | 2015 |
Evaluation of Inverted Microstrip Gap Waveguide Bandpass Filters for Ka-band N Castro, F Pizarro, LF Herrán-Ontanón, E Rajo-Iglesias AEU-International Journal of Electronics and Communications 134, 153677, 2021 | 8 | 2021 |
3D-Printed Half-Maxwell Fish-Eye dielectric lens antenna with integrated DRA feed JM Poyanco, F Pizarro, E Rajo-Iglesias 2022 16th European Conference on Antennas and Propagation (EuCAP), 1-5, 2022 | 7 | 2022 |
Plasma microdischarge as power-induced limiter element in microstrip devices R Pascaud, F Pizarro, T Callegari, L Liard, O Pascal 2015 9th European Conference on Antennas and Propagation (EuCAP), 1-5, 2015 | 7 | 2015 |
Experimental study of RF/microplasma interaction using an inverted microstrip line F Pizarro, R Pascaud, O Pascal, T Callegari, L Liard 2013 7th European Conference on Antennas and Propagation (EuCAP), 1187-1190, 2013 | 7 | 2013 |
Evaluation of microplasma discharges as active components for reconfigurable antennas F Pizarro, R Pascaud, O Pascal, T Callegari, L Liard 2012 6th European Conference on Antennas and Propagation (EUCAP), 117-119, 2012 | 7 | 2012 |