| Evaluating comparative performance of Indian engineering educational institutes based on TQM criteria for internal benchmarking N Mehta, N Diwakar, R Arya Benchmarking: An International Journal 26 (1), 221-245, 2019 | 20 | 2019 |
| ``Prediction of wind power potential by wind speed probability distribution in a hilly terrain near Bhopal, Madhya Pradesh'' N Diwakar, S Ganesan, S Ahmed, VK Sethi Int. J. of Emerging Tech 1, 80-86, 2010 | 17 | 2010 |
| Flow analysis of butterfly valve using CFD A Azad, D Baranwal, R Arya, N Diwakar Int. J. Mod. Eng. Res. Technol 4, 50-56, 2014 | 12 | 2014 |
| Study of solar system with possible modification to increase the efficiency of PV panel A Sharma, N Mehta, N Diwakar International Journal of Engineering and Management Research (IJEMR) 8 (1 …, 2018 | 4 | 2018 |
| A review of experimental study and CFD based simulation of closed loop pulsating heat pipe M Tiwari, N Diwakar International Journal of Research–Granthaalayah 4 (7), 265-270, 2016 | 3 | 2016 |
| A study on the effect of welding on HAZ, mechanical properties and corrosion of AISI 409m ferritic stainless steel by SMAW, TIG and MIG welding J Swati, D Nilesh, A Rajeev International Journal of New Innovation in Science and Technology 3 (1), 1-9, 2015 | 2 | 2015 |
| Multi-response optimization for AISI M7 Hard Turning Using the utility concept N Bhone, N Diwakar, SS Chinchanikar The Scientific Temper 14 (01), 142-149, 2023 | 1 | 2023 |
| Effect of heat treatment on microstructure, mechanical and corrosion characteristics of Duplex Stainless Steel 2205: A Review AY Chaudhari, N Diwakar, SD Kalpande scope 13 (01), 301-313, 2023 | 1 | 2023 |
| Investigating the different process parameters and their effects of solar energy R Kumar, R Arya, N Diwakar, S Daniel International Journal for Research Trends and Innovation 4, 1-5, 2019 | 1 | 2019 |
| Design and Fabrication of Semi Automatic Dual Axis Solar Tracking and Experimentally Analysis Its Efficiency N Gupta, R Arya, A Khare, N Diwakar vol. VI, no. V, 201-210, 2019 | 1 | 2019 |
| Study of solar PVT-PCM Hybrid System with Possible Modifications to Increase Module and Thermal Efficiency P Shukla, N Diwakar, N Mehta International Journal on Emerging Technologies 7 (2), 52-57, 2016 | 1 | 2016 |
| Mathematical simulation and energy estimation of 10 kW horizontal axis wind turbine rotor at hilly site of RGPV, Bhopal (Case study) N Diwakar, S Ganesan, A Siraj, VK Sethi Current World Environment 4 (2), 255, 2009 | 1 | 2009 |
| MULTIPLE ATTRIBUTE DECISION-MAKING METHODS HELPS IN LOGICALLY SELECTION OF CHAFF CUTTING MACHINE BLADES DNJR Hemant Rajendra Nehete , Dr.Nilesh Diwakar, Dr.M.K Chopra European Chemical Bulletin 12 (3), 7306-7317, 2023 | | 2023 |
| Mechanical Characteristics Morphology and Corrosion Behavior of Duplex Stainless Steel 2205 SKK Amol Chaudhari, Nilesh Diwakar European Chemical Bulletin 12 (08), 4900-4910, 2023 | | 2023 |
| Experimental Investigations and Simulation of Solar-Powered Reverse Osmosis Water Desalination System using CFD SSC Shivaji S. Gadadhe, Nilesh Diwakar International Journal of Engineering Trends and Technology 71 (4), 515-524, 2023 | | 2023 |
| EXPERIMENTAL ANALYSIS ON LASER CUTTING OF HASTELLOY C 276: EFFECTS OF PROCESS PARAMETERS ON KERF WIDTH, SURFACE ROUGHNESS, HAZ USING TAGUCHI TECHNIQUE SDK SJ Aswar, N Diwakar JOURNAL OF AERONAUTICAL MATERIALS 43 (1), 961-973, 2023 | | 2023 |
| INVESTIGATIONS AND OPTIMIZATION OF LASER PROCESS PARAMETERS USING BOX BENHKEN DESIGN APPROACH FOR ADVANCED MATERIALS SDK SJ Aswar, N Diwakar JOURNAL OF AERONAUTICAL MATERIALS 43 (1), 525-542, 2023 | | 2023 |
| CHAFF CUTTER MACHINE STEEL SELECTION BASED ON AHP AND TOPSIS DNJR Hemant Rajendra Nehete , Dr.Nilesh Diwakar, Dr.M.K Chopra European Chemical Bulletin 12 (03), 7306-7317, 2023 | | 2023 |
| EXPERIMENTAL ANALYSIS ON LASER CUTTING OF HASTELLOY C 276: EFFECTS OF PROCESS PARAMETERS ON KERF WIDTH, SURFACE ROUGHNESS, HAZ USING TAGUCHI TECHNIQUE SDK SJ Aswar, N Diwakar JOURNAL OF AERONAUTICAL MATERIALS 43 (1), 961-973, 2023 | | 2023 |
| INVESTIGATIONS AND OPTIMIZATION OF LASER PROCESS PARAMETERS USING BOX BENHKEN DESIGN APPROACH FOR ADVANCED MATERIALS SDK SJ Aswar, N Diwakar JOURNAL OF AERONAUTICAL MATERIALS 43 (1), 525-542, 2023 | | 2023 |
Dr. Rajeev AryaProfessor of Mechanical Engineering, Truba Group of institutes在 trubainstitute.ac.in 的电子邮件经过验证
