| Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture Y Chen, SC Figueiredo, Z Li, Z Chang, K Jansen, O Çopuroğlu, ... Cement and Concrete Research 132, 106040, 2020 | 201 | 2020 |
| Sustainable materials for 3D concrete printing S Bhattacherjee, AS Basavaraj, AV Rahul, M Santhanam, R Gettu, ... Cement and Concrete Composites 122, 104156, 2021 | 179 | 2021 |
| The effect of viscosity-modifying admixture on the extrudability of limestone and calcined clay-based cementitious material for extrusion-based 3D concrete printing Y Chen, S Chaves Figueiredo, Ç Yalçinkaya, O Çopuroğlu, F Veer, ... Materials 12 (9), 1374, 2019 | 142 | 2019 |
| Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study Y Chen, K Jansen, H Zhang, CR Rodriguez, Y Gan, O Çopuroğlu, ... Construction and Building Materials 262, 120094, 2020 | 129 | 2020 |
| Limestone and calcined clay-based sustainable cementitious materials for 3D concrete printing: a fundamental study of extrudability and early-age strength development Y Chen, Z Li, S Chaves Figueiredo, O Çopuroğlu, F Veer, E Schlangen Applied Sciences 9 (9), 1809, 2019 | 120 | 2019 |
| Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing Y Chen, CR Rodriguez, Z Li, B Chen, O Çopuroğlu, E Schlangen Cement and Concrete Composites 114, 103708, 2020 | 117 | 2020 |
| A review of printing strategies, sustainable cementitious materials and characterization methods in the context of extrusion-based 3D concrete printing Y Chen, S He, Y Gan, O Çopuroğlu, F Veer, E Schlangen Journal of Building Engineering 45, 103599, 2022 | 99 | 2022 |
| 3D printing of calcined clay-limestone-based cementitious materials Y Chen, S He, Y Zhang, Z Wan, O Çopuroğlu, E Schlangen Cement and Concrete Research 149, 106553, 2021 | 90 | 2021 |
| A critical review of 3D concrete printing as a low CO2 concrete approach Y Chen, F Veer, O Copuroglu Heron 62 (3), 167-194, 2017 | 78 | 2017 |
| Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography Y Chen, O Çopuroğlu, CR Rodriguez, FF de Mendonca Filho, ... Materials Characterization 173, 110948, 2021 | 64 | 2021 |
| Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing Y Chen, F Veer, O Copuroglu, E Schlangen RILEM International Conference on Concrete and Digital Fabrication, 269-276, 2018 | 36 | 2018 |
| A discrete lattice model for assessment of buildability performance of 3D‐printed concrete Z Chang, Y Xu, Y Chen, Y Gan, E Schlangen, B Šavija Computer‐Aided Civil and Infrastructure Engineering 36 (5), 638-655, 2021 | 35 | 2021 |
| Micro-cantilever testing on the short-term creep behaviour of cement paste at micro-scale Y Gan, M Vandamme, H Zhang, Y Chen, E Schlangen, K van Breugel, ... Cement and Concrete Research 134, 106105, 2020 | 29 | 2020 |
| The effect of slag chemistry on the reactivity of synthetic and commercial slags Y Zhang, S Zhang, Y Chen, O Çopuroğlu Construction and Building Materials 335, 127493, 2022 | 20 | 2022 |
| Effect of curing methods during a long time gap between two printing sessions on the interlayer bonding of 3D printed cementitious materials Y Chen, Z Chang, S He, O Çopuroğlu, B Šavija, E Schlangen Construction and Building Materials 332, 127394, 2022 | 18 | 2022 |
| Experimental investigation of the short-term creep recovery of hardened cement paste at micrometre length scale Y Gan, M Vandamme, Y Chen, E Schlangen, K van Breugel, B Šavija Cement and Concrete Research 149, 106562, 2021 | 15 | 2021 |
| Predicting early‐age stress evolution in restrained concrete by thermo‐chemo‐mechanical model and active ensemble learning M Liang, Z Chang, S He, Y Chen, Y Gan, E Schlangen, B Šavija Computer‐Aided Civil and Infrastructure Engineering 37 (14), 1809-1833, 2022 | 14 | 2022 |
| Fresh properties of limestone-calcined clay-slag cement pastes Y Chen, Y Zhang, B Šavija, O Çopuroğlu Cement and Concrete Composites 138, 104962, 2023 | 13 | 2023 |
| Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing? Y Chen, M Liang, Y Zhang, Z Li, B Šavija, E Schlangen, O Çopuroğlu Construction and Building Materials 371, 130777, 2023 | 13 | 2023 |
| Distribution of porosity surrounding a microfiber in cement paste S He, Y Chen, M Liang, EH Yang, E Schlangen Cement and Concrete Composites 142, 105188, 2023 | 7 | 2023 |
Erik SchlangenProfessor @ Delft University of Technology在 tudelft.nl 的电子邮件经过验证
