Comparison of particulate matters properties from combustion of wood biomass and brown coal N Kantová, M Holubčík, J Jandačka, A Čaja Procedia engineering 192, 416-420, 2017 | 22 | 2017 |
Simulation of biomass combustion with modified flue gas tract N Čajová Kantová, S Sładek, J Jandačka, A Čaja, R Nosek Applied Sciences 11 (3), 1278, 2021 | 15 | 2021 |
The Performance and Emission Parameters Based on the Redistribution of the Amount of Combustion Air of the Wood Stove M Holubčík, N Čajová Kantová, J Jandačka, A Čaja Processes 10 (8), 1570, 2022 | 10 | 2022 |
Impact of the Speed of Airflow in a Cleanroom on the Degree of Air Pollution P Mičko, D Hečko, A Kapjor, R Nosek, Z Kolková, P Hrabovský, ... Applied Sciences 12 (5), 2466, 2022 | 10 | 2022 |
Dependence of the flue gas flow on the setting of the separation baffle in the flue gas tract N Čajová Kantová, A Čaja, M Patsch, M Holubčík, P Ďurčanský Applied sciences 11 (7), 2961, 2021 | 10 | 2021 |
The impact of bark content in wood pellets on emission production during combustion in small heat source M Holubcik, J Jandacka, M Palacka, N Kantova, E Jachniak, P Pavlik Communications-Scientific letters of the University of Zilina 19 (2A), 94-100, 2017 | 9 | 2017 |
Energy performance of a rotary burner using pellets prepared from various alternative biomass residues J Trnka, M Holubcik, NC Kantova, J Jandacka BioResources 16 (4), 6737, 2021 | 8 | 2021 |
Analyses of pellets produced from spruce sawdust, spruce bark, and pine cones in different proportions N Čajová Kantová, M Holubčík, A Čaja, J Trnka, J Jandačka Energies 15 (8), 2725, 2022 | 6 | 2022 |
Mechanical and energy properties of pellets formed from walnut shells blended with spruce sawdust NC Kantova, A Caja, P Belány, Z Kolková, P Hrabovsky, D Hecko, ... BioResources 17 (1), 1881, 2022 | 5 | 2022 |
Impact of the wood geometric parameters on the particulate matter production in small heat source M Holubčík, J Jandačka, N Kantová AIP Conference Proceedings 2000 (1), 2018 | 5 | 2018 |
The energy assessment of COVID-19 medical waste as a potential fuel NČ Kantová, R Cibula, A Szlek, A Čaja, R Nosek, P Belany Energy Reports 9, 4995-5003, 2023 | 4 | 2023 |
Analysis of ash melting temperatures of agricultural pellets detected during different conditions N Čajová Kantová, M Holubčík, J Trnka, A Čaja Fire 6 (3), 88, 2023 | 4 | 2023 |
Using heat exchanger for construction of electrostatic precipitator in a small heat source M Holubčík, J Trnka, NČ Kantová Journal of Electrostatics 128, 103884, 2024 | 3 | 2024 |
Decreasing solid aerosols from small heat sources using the optimized electrostatic precipitator M Holubčík, NČ Kantová, J Trnka, J Jandačka Atmosphere 13 (9), 1438, 2022 | 3 | 2022 |
Design of a low-cost electrostatic precipitator to reduce particulate matter emissions from small heat sources J Drga, M Holubčík, N Čajová Kantová, B Červenka Energies 15 (11), 4148, 2022 | 3 | 2022 |
Mathematic model for prediction of heat output of small boiler depending on various aspects M Holubcik, N Kantova, B Cervenka, J Trnka AIP Conference Proceedings 2118 (1), 2019 | 3 | 2019 |
Alternative solid fuels combustion in small heat source M Holubčík, N Kantová, J Jandačka, Z Kolková MATEC Web of Conferences 168, 2018 | 3 | 2018 |
Co-combustion investigation of wood pellets blended with FFP2 masks: analysis of the ash melting temperature N Čajová Kantová, M Holubčík, A Čaja, J Trnka, P Hrabovský, P Belány Forests 14 (3), 636, 2023 | 2 | 2023 |
Optimization of discharging electrodes of a multi-chamber electrostatic precipitator for small heat sources M Holubčík, J Drga, N Čajová Kantová, J Najser, J Frantík Atmosphere 14 (1), 63, 2022 | 2 | 2022 |
Energy Consumption Depending on the Durability of Pellets Formed from Sawdust with an Admixture of FFP2 Masks N Čajová Kantová, P Belány, M Holubčík, A Čaja Energies 15 (13), 4813, 2022 | 2 | 2022 |