| A study of parametric calibration for low cost 3D printing: Seeking improvement in dimensional quality L Santana, JL Alves, ACS Netto Materials & Design 135, 159-172, 2017 | 89 | 2017 |
| Influence of 3D printing process parameters on the mechanical properties and mass of PLA parts and predictive models JA Afonso, JL Alves, G Caldas, BP Gouveia, L Santana, J Belinha Rapid Prototyping Journal 27 (3), 487-495, 2021 | 85 | 2021 |
| Estudo comparativo entre PETG e PLA para Impressão 3D através de caracterização térmica, química e mecânica L Santana, JL Alves, AC Sabino Netto, C Merlini Matéria (Rio de Janeiro) 23, e12267, 2018 | 67 | 2018 |
| A comparative study between PETG and PLA for 3D printing through thermal, chemical and mechanical characterization L Santana, JL Alves, AC Sabino Netto, C Merlini Matéria (Rio de Janeiro) 23, e12267, 2018 | 54 | 2018 |
| Evaluating the deposition quality of parts produced by an open-source 3D printer L Santana, CH Ahrens, A da Costa Sabino Netto, C Bonin Rapid Prototyping Journal 23 (4), 796-803, 2017 | 23 | 2017 |
| Sandwich structures based on fused filament fabrication 3D‐printed polylactic acid honeycomb and poly (vinylidene fluoride) nanocomposites for microwave absorbing applications DP Schmitz, BG Soares, GMO Barra, L Santana Polymer Composites 44 (4), 2250-2261, 2023 | 20 | 2023 |
| Avaliação da composição química e das características térmicas de filamentos de PLA para impressoras 3D de código aberto L Santana, CH Ahrens, AC SABINO NETTO IX Congresso Nacional de Engenharia Mecânica, 2016 | 15 | 2016 |
| Avaliação de uma impressora 3D baseada em projeto de código aberto na fabricação de peças em PLA L Santana Mestre, Engenharia Mecânica, Universidade Federal de Santa CAtarina. https …, 2015 | 15 | 2015 |
| Avaliação das capacidades da impressão 3D de baixo custo na fabricação de snap-fits: uma relação de reconhecimento usuário-sistema de impressão L Santana | 8 | 2019 |
| DIMENSIONAL ANALYSIS OF PLA AND PETG PARTS BUILT BY OPEN SOURCE EXTRUSION-BASED 3D PRINTING L Santana, JL Alves, AC Sabino Netto | 8* | |
| 3D printing for construction with alternative materials B Rangel, AS Guimarães, J Lino, L Santana Springer Nature, 2023 | 7 | 2023 |
| Parametric calibration study of fused filament fabrication printing with large nozzle diameter D Vieira da Silva, L Santana, A Magalhães, J Lino Alves Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …, 2024 | 6 | 2024 |
| Effects of nozzle material and its lifespan on the quality of PLA parts manufactured by FFF 3D Printing JT Melo, L Santana, HT Idogava, AIL Pais, JL Alves Engineering Manufacturing Letters 1 (1), 20-27, 2022 | 6 | 2022 |
| Binder jetting JL Alves, L Santana, EMO Garzón Polymers for 3D Printing, 113-125, 2022 | 6 | 2022 |
| Investigating the importance of student location and time spent online in academic performance and self-regulation M Ocaña, R Mejía, C Larrea, E Cruz, L Santana, M Empinotti Artificial Intelligence, Computer and Software Engineering Advances …, 2021 | 6 | 2021 |
| Narrativas complexas A Lovato, A Gifreu-Castells, A Brandão, C Di Palma, CA Amaya, ... Ria Editorial, 2020 | 6 | 2020 |
| Effect of the angle of the laid-up filaments on the surfaces on the coefficient of static friction between parts manufactured by extrusion-based 3D printing L Santana, JL Alves, ACS Netto Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2021 | 4 | 2021 |
| 3D printed honeycomb bilayer structures based on polylactic acid as lightweight microwave absorbing materials DP Schmitz, L Santana, GMO Barra, BG Soares Polymers for Advanced Technologies 35 (3), e6339, 2024 | 3 | 2024 |
| 4D printing and construction: reality, future, or science fiction? JL Alves, L Santana, B Rangel 3D Printing for Construction with Alternative Materials, 155-175, 2023 | 3 | 2023 |
| Avaliação de corpos de prova produzidos em PLA por manufatura aditiva por extrusão e moldagem por injeção ACS Netto, L Santana, I Pereira, RA Paggi, DC Lencina 13o Congresso Iberoamericano de Engenharia Mecânica, Lisboa, Portugal, 2017 | 3 | 2017 |
