| Strengthening contributions of dislocations and twins in warm-rolled TWIP steels YZ Li, ZY Liang, MX Huang International Journal of Plasticity 150, 103198, 2022 | 56 | 2022 |
| Corrosion performance of heat-resisting steels and alloys in supercritical carbon dioxide at 650° C and 15 MPa Z Liang, Y Gui, Y Wang, Q Zhao Energy 175, 345-352, 2019 | 55 | 2019 |
| Use of microwave-assisted deep eutectic solvents to recycle lithium manganese oxide from Li-ion batteries Z Xu, H Shao, Q Zhao, Z Liang Jom 73, 2104-2110, 2021 | 39 | 2021 |
| Recycling lithium and cobalt from LIBs using microwave-assisted deep eutectic solvent leaching technology at low-temperature M Liu, W Ma, X Zhang, Z Liang, Q Zhao Materials Chemistry and Physics 289, 126466, 2022 | 38 | 2022 |
| Experimental study on dew point corrosion characteristics of the heating surface in a 65 t/h biomass-fired circulating fluidized bed boiler Y Wang, H Ma, Z Liang, H Chen, Q Zhao, X Jin Applied Thermal Engineering 96, 76-82, 2016 | 36 | 2016 |
| Corrosion and carburization behavior of heat-resistant steels in a high-temperature supercritical carbon dioxide environment Y Gui, Z Liang, Q Zhao Oxidation of Metals 92, 123-136, 2019 | 35 | 2019 |
| Corrosion behavior and lifetime prediction of VM12, Sanicro 25 and Inconel 617 in supercritical carbon dioxide at 600 C Y Gui, Z Liang, H Shao, Q Zhao Corrosion Science 175, 108870, 2020 | 34 | 2020 |
| Gas-phase total oxidation of nitric oxide using hydrogen peroxide vapor over Pt/TiO2 L Chen, Z Xu, C He, Y Wang, Z Liang, Q Zhao, Q Lu Applied Surface Science 457, 821-830, 2018 | 34 | 2018 |
| Desulfurized flue gas corrosion coupled with deposits in a heating boiler P Pan, H Chen, Z Liang, Q Zhao Corrosion Science 131, 126-136, 2018 | 29 | 2018 |
| Experimental study on corrosion of steels for flue gas reheaters in a coal-fired power plant PY Pan, H Chen, ZY Liang, QX Zhao Applied Thermal Engineering 115, 267-279, 2017 | 27 | 2017 |
| Failure analysis of spiral finned tube on the economizer ZY Liang, QX Zhao Engineering Failure Analysis 28, 208-214, 2013 | 24 | 2013 |
| Coupling mechanism of dew point corrosion and viscous ash deposits ZY Liang, QX Zhao, YG Wang, YX Li, ZC Zhang Materials and Corrosion 65 (8), 797-802, 2014 | 23 | 2014 |
| High temperature oxidation of newly developed alloy 282 in the flowing-air and steam condition at 900–1100° C Z Liang, PM Singh, Q Zhao, Y Wang Oxidation of Metals 84, 291-305, 2015 | 22 | 2015 |
| Field studies of steam oxidation behavior of austenitic heat-resistant steel 10Cr18Ni9Cu3NbN Z Liang, Q Zhao, PM Singh, Y Wang, Y Li, Y Wang Engineering Failure Analysis 53, 132-137, 2015 | 22 | 2015 |
| Investigation of overheating of the final super-heater in a 660 MW power plant Z Liang, X Jin, Q Zhao Engineering Failure Analysis 45, 59-64, 2014 | 21 | 2014 |
| High-temperature corrosion of an Fe–Ni-based alloy HR6W under various conditions at 750° C and 810° C: Effect of the temperature, water vapor, simulated ash and SO2 Z Liang, T Guo, S Deng, Q Zhao Materials Chemistry and Physics 256, 123670, 2020 | 20 | 2020 |
| Deposition and corrosion characteristics of liquid-solid droplets on tubular corrosion probes in desulfurized flue gas P Pan, H Chen, Z Liang, Q Zhao Engineering Failure Analysis 90, 129-140, 2018 | 19 | 2018 |
| Investigation on the NO Removal from Simulated Flue Gas by Using H2O2 Vapor over Fe2(MoO4)3 L Chen, W Yang, Y Wang, Z Liang, Q Zhao, Q Lu Energy & Fuels 32 (8), 8605-8613, 2018 | 19 | 2018 |
| Characteristics of the corrosion products on three scratched heat-resisting alloys in closed-loop supercritical and high-temperature CO2 T Guo, Y Xu, S Liu, Z Liang, Q Zhao Corrosion Science 198, 110148, 2022 | 18 | 2022 |
| Micro-structural evolution of oxide scales formed on a Nb-Stabilizing heat-resistant steel at the initial stage in high-temperature water vapor Z Liang, Y Wang, Y Gui, Q Zhao Materials Chemistry and Physics 242, 122443, 2020 | 18 | 2020 |
