| Static recrystallization kinetics of a heavily cold drawn AZ31 magnesium alloy under annealing treatment HY Chao, HF Sun, WZ Chen, ED Wang Materials Characterization 62 (3), 312-320, 2011 | 140 | 2011 |
| Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling W Wang, W Chen, W Zhang, G Cui, E Wang Materials Science and Engineering: A 712, 608-615, 2018 | 95 | 2018 |
| Microstructure and mechanical properties of thin ZK61 magnesium alloy sheets by extrusion and multi–pass rolling with lowered temperature LX Zhang, WZ Chen, WC Zhang, WK Wang, E Wang Journal of Materials Processing Technology 237, 65-74, 2016 | 80 | 2016 |
| Texture dependence of uniform elongation for a magnesium alloy WZ Chen, X Wang, ED Wang, ZY Liu, LX Hu Scripta Materialia 67 (10), 858-861, 2012 | 61 | 2012 |
| Preparation of TiBw/Ti–6Al–4V composite with an inhomogeneous reinforced structure by a canned hot extrusion process W Zhang, M Wang, W Chen, Y Feng, Y Yu Journal of Alloys and Compounds 669, 79-90, 2016 | 56 | 2016 |
| Evolution of microstructure, texture and mechanical properties of ZK60 magnesium alloy in a single rolling pass W Wang, G Cui, W Zhang, W Chen, E Wang Materials Science and Engineering: A 724, 486-492, 2018 | 53 | 2018 |
| Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion JL Yang, GF Wang, WC Zhang, WZ Chen, XY Jiao, KF Zhang Materials Science and Engineering: A 699, 210-216, 2017 | 53 | 2017 |
| Precipitation behavior of silicide and synergetic strengthening mechanisms in TiB-reinforced high-temperature titanium matrix composites during multi-directional forging S Sun, E Zhao, C Hu, Y An, W Chen Journal of Alloys and Compounds 867, 159051, 2021 | 52 | 2021 |
| Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 Mg alloy via multi-directional impact forging C Cui, W Zhang, W Chen, J He, X Chen, J Hou Journal of Magnesium and Alloys 10 (10), 2745-2760, 2022 | 49 | 2022 |
| Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression WC Zhang, Y Yu, XN Zhang, WZ Chen, ED Wang Materials Science and Engineering: A 600, 181-187, 2014 | 47 | 2014 |
| Effect of initial texture on the bending behavior, microstructure and texture evolution of ZK60 magnesium alloy during the bending process W Wang, W Zhang, W Chen, G Cui, E Wang Journal of Alloys and Compounds 737, 505-514, 2018 | 45 | 2018 |
| Weakened anisotropy of mechanical properties in rolled ZK60 magnesium alloy sheets with elevated deformation temperature W Wang, W Chen, W Zhang, G Cui, E Wang Journal of Materials Science & Technology 34 (11), 2042-2050, 2018 | 43 | 2018 |
| Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5 Nd-0.5 Zn-0.5 Zr alloy during the high strain rate hot-rolling S Wang, W Zhang, H Wang, J Yang, W Chen, G Cui, G Wang Materials Science and Engineering: A 803, 140488, 2021 | 42 | 2021 |
| Yield strength behavior for rolled magnesium alloy sheets with texture variation WZ Chen, X Wang, MN Kyalo, ED Wang, ZY Liu Materials Science and Engineering: A 580, 77-82, 2013 | 42 | 2013 |
| Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis WZ Chen, Y Yu, X Wang, ED Wang, ZY Liu Materials Science and Engineering: A 575, 136-143, 2013 | 40 | 2013 |
| Fabrication of ZK60 magnesium alloy thin sheets with improved ductility by cold rolling and annealing treatment W Chen, X Wang, L Hu, E Wang Materials & Design 40, 319-323, 2012 | 40 | 2012 |
| Microstructure, texture and mechanical properties of extruded AZ31 Mg alloy during small strain multi-directional forging with gradient cooling C Cui, J He, W Wang, W Chen, W Zhang Journal of Alloys and Compounds 909, 164795, 2022 | 37 | 2022 |
| Improved tension/compression asymmetry achieved in high-strength magnesium alloys via compression-extrusion process H Wang, L Zhang, W Chen, D Fang, W Zhang, G Cui Materials Science and Engineering: A 736, 239-247, 2018 | 36 | 2018 |
| Influence of large cold strain on the microstructural evolution for a magnesium alloy subjected to multi-pass cold drawing WZ Chen, WC Zhang, HY Chao, LX Zhang, ED Wang Materials Science and Engineering: A 623, 92-96, 2015 | 35 | 2015 |
| Improvement of tension/compression asymmetry for high-performance ZK61 magnesium alloy rod via tailoring deformation parameters: Upsetting-extrusion temperature and upsetting ratio WJ Wu, WZ Chen, LX Zhang, XM Chen, HX Wang, WK Wang, WC Zhang Materials Science and Engineering: A 823, 141767, 2021 | 29 | 2021 |
