| Effect of tool material on tool wear and delamination during machining of particleboard K Szwajka, T Trzepieciński Journal of Wood Science 62, 305-315, 2016 | 35 | 2016 |
| Evaluation tool condition of milling wood on the basis of vibration signal K Szwajka, J Górski Journal of Physics: Conference Series 48 (1), 1205, 2006 | 32 | 2006 |
| Experimental study on drilling MDF with tools coated with TiAlN and ZrN K Szwajka, J Zielińska-Szwajka, T Trzepiecinski Materials 12 (3), 386, 2019 | 20 | 2019 |
| On the machinability of medium density fiberboard by drilling K Szwajka, T Trzepiecinski BioResources 13 (4), 8263-8278, 2018 | 15 | 2018 |
| Frictional characteristics of deep-drawing quality steel sheets in the flat die strip drawing test M Szewczyk, K Szwajka, T Trzepieciński Materials 15 (15), 5236, 2022 | 12 | 2022 |
| An examination of the tool life and surface quality during drilling melamine faced chipboard K Szwajka, T Trzepieciński Wood Res 62, 307-318, 2017 | 12 | 2017 |
| Assessment of the tribological performance of bio-based lubricants using analysis of variance M Szewczyk, K Szwajka Advances in Mechanical and Materials Engineering 40 (1), 31-38, 2023 | 11 | 2023 |
| The influence of machining parameters and tool wear on the delamination process during milling of melamine-faced chipboard K Szwajka, T Trzepiecinski Drewno. Prace Naukowe. Doniesienia. Komunikaty 60 (199), 2017 | 10 | 2017 |
| Improving the Surface Integrity of 316L steel in the context of bioimplant applications K Szwajka, J Zielińska-Szwajka, T Trzepieciński Materials 16 (9), 3460, 2023 | 8 | 2023 |
| The use of non-edible green oils to lubricate DC04 steel sheets in sheet metal forming process T Trzepieciński, M Szewczyk, K Szwajka Lubricants 10 (9), 210, 2022 | 7 | 2022 |
| The use of a radial basis function neural network and fuzzy modelling in the assessment of surface roughness in the MDF milling process K Szwajka, J Zielińska-Szwajka, T Trzepieciński Materials 16 (15), 5292, 2023 | 6 | 2023 |
| Sensor signals for tool-wear monitoring in wood cutting operations-a review of methods. Part 4. K Szwajka, J Zielńska-Szwajka | 6 | 2008 |
| The quality of the machined surface in the drilling process laminated chipboard J Zielinska-Szwajka, K Szwajka Annals of Warsaw University of Life Sciences-SGGW. Forestry and Wood Technology, 2014 | 5 | 2014 |
| Torque and thrust force in drilling K Szawajka Annals of Warsaw University of Life Sciences-SGGW. Forestry and Wood Technology, 2011 | 5 | 2011 |
| Neural networks based in process tool wear prediction system in milling wood operations K Szwajka, J Zielinska-Szwajka, J Gorski Fifth International Symposium on Instrumentation Science and Technology 7133 …, 2009 | 5 | 2009 |
| Microstructure and mechanical properties of solid-state rotary friction welded Inconel 713C and 32CrMo4 steel joints used in a turbocharger rotor K Szwajka, J Zielińska-Szwajka, T Trzepieciński Materials 16 (6), 2273, 2023 | 4 | 2023 |
| Wpływ wybranych parametrów skrawania na dokładność obróbki w procesie wiercenia stopu Ti6Al4V K Szwajka, J Zielińska-Szwajka Advances in Mechanical and Materials Engineering 36 (1-2), 79-92, 2019 | 4 | 2019 |
| An investigation into the friction of cold-rolled low-carbon DC06 steel sheets in sheet metal forming using radial basis function neural networks T Trzepieciński, K Szwajka, M Szewczyk Applied Sciences 13 (17), 9572, 2023 | 3 | 2023 |
| Pressure-assisted lubrication of DC01 steel sheets to reduce friction in sheet-metal-forming processes T Trzepieciński, K Szwajka, M Szewczyk Lubricants 11 (4), 169, 2023 | 3 | 2023 |
| Analysis of the Delamination in Drilling of Particle Board K Szwajka Materials Science Forum 818, 243-247, 2015 | 3 | 2015 |
