| Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high/medium entropy alloys S Yoshida, T Ikeuchi, T Bhattacharjee, Y Bai, A Shibata, N Tsuji Acta Materialia 171, 201-215, 2019 | 207 | 2019 |
| Precise measurement of strain accommodation in austenite matrix surrounding martensite in ferrous alloys by electron backscatter diffraction analysis G Miyamoto, A Shibata, T Maki, T Furuhara Acta Materialia 57 (4), 1120-1131, 2009 | 201 | 2009 |
| Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending test A Shibata, T Nagoshi, M Sone, S Morito, Y Higo Materials Science and Engineering: A 527 (29-30), 7538-7544, 2010 | 193 | 2010 |
| Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel Y Momotani, A Shibata, D Terada, N Tsuji International journal of hydrogen energy 42 (5), 3371-3379, 2017 | 187 | 2017 |
| Significant contribution of stacking faults to the strain hardening behavior of Cu-15% Al alloy with different grain sizes YZ Tian, LJ Zhao, S Chen, A Shibata, ZF Zhang, N Tsuji Scientific reports 5 (1), 16707, 2015 | 165 | 2015 |
| Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy RR Eleti, T Bhattacharjee, A Shibata, N Tsuji Acta Materialia 171, 132-145, 2019 | 139 | 2019 |
| Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures R Zheng, T Bhattacharjee, A Shibata, T Sasaki, K Hono, M Joshi, N Tsuji Scripta Materialia 131, 1-5, 2017 | 137 | 2017 |
| Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures Y Chong, G Deng, S Gao, J Yi, A Shibata, N Tsuji Scripta Materialia 172, 77-82, 2019 | 135 | 2019 |
| Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel Y Bai, Y Momotani, MC Chen, A Shibata, N Tsuji Materials Science and Engineering: A 651, 935-944, 2016 | 135 | 2016 |
| Substructures of lenticular martensites with different martensite start temperatures in ferrous alloys A Shibata, S Morito, T Furuhara, T Maki Acta Materialia 57 (2), 483-492, 2009 | 127 | 2009 |
| Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel S Gao, Y Bai, R Zheng, Y Tian, W Mao, A Shibata, N Tsuji Scripta Materialia 159, 28-32, 2019 | 123 | 2019 |
| Effect of low temperature on tensile properties of AlCoCrFeNi2. 1 eutectic high entropy alloy T Bhattacharjee, R Zheng, Y Chong, S Sheikh, S Guo, IT Clark, T Okawa, ... Materials Chemistry and Physics 210, 207-212, 2018 | 118 | 2018 |
| Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility YZ Tian, LJ Zhao, N Park, R Liu, P Zhang, ZJ Zhang, A Shibata, ZF Zhang, ... Acta Materialia 110, 61-72, 2016 | 115 | 2016 |
| Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory … RR Eleti, AH Chokshi, A Shibata, N Tsuji Acta Materialia 183, 64-77, 2020 | 112 | 2020 |
| Local orientation change inside lenticular martensite plate in Fe–33Ni alloy A Shibata, S Morito, T Furuhara, T Maki Scripta materialia 53 (5), 597-602, 2005 | 111 | 2005 |
| Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT) Y Chong, T Bhattacharjee, J Yi, A Shibata, N Tsuji Scripta Materialia 138, 66-70, 2017 | 96 | 2017 |
| A novel ultrafine-grained Fe22Mn0. 6C TWIP steel with superior strength and ductility YZ Tian, Y Bai, LJ Zhao, S Gao, HK Yang, A Shibata, ZF Zhang, N Tsuji Materials Characterization 126, 74-80, 2017 | 94 | 2017 |
| The origin of midrib in lenticular martensite A Shibata, T Murakami, S Morito, T Furuhara, T Maki Materials transactions 49 (6), 1242-1248, 2008 | 93 | 2008 |
| Microstructural and crystallographic features of hydrogen-related crack propagation in low carbon martensitic steel A Shibata, H Takahashi, N Tsuji ISIJ international 52 (2), 208-212, 2012 | 92 | 2012 |
| Bright nickel film deposited by supercritical carbon dioxide emulsion using additive-free Watts bath TFM Chang, M Sone, A Shibata, C Ishiyama, Y Higo Electrochimica Acta 55 (22), 6469-6475, 2010 | 92 | 2010 |
