| Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review N Zohdi, RC Yang Polymers 13 (19), 3368, 2021 | 86 | 2021 |
| Morphological changes towards enhancing piezoelectric properties of PVDF electrical generators using cellulose nanocrystals H Fashandi, MM Abolhasani, P Sandoghdar, N Zohdi, Q Li, M Naebe Cellulose 23, 3625-3637, 2016 | 68 | 2016 |
| Towards predicting the piezoelectricity and physiochemical properties of the electrospun P(VDF-TrFE) nanogenrators using an artificial neural network MN Mohammad Mahdi Abolhasani, Kamyar Shirvanimoghaddam, Hamid Khayyam, Seyed ... Polymer Testing, 2018 | 35 | 2018 |
| Removal of boron from aqueous solution using magnetic carbon nanotube improved with tartaric acid N Zohdi, F Mahdavi, LC Abdullah, TSY Choong Journal of Environmental Health Science and Engineering 12, 1-12, 2014 | 27 | 2014 |
| Influence of different nanocellulose additives on processing and performance of PAN-based carbon fibers E Jiang, M Maghe, N Zohdi, N Amiralian, M Naebe, B Laycock, BL Fox, ... ACS omega 4 (6), 9720-9730, 2019 | 19 | 2019 |
| Predicting material properties of additively manufactured acrylonitrile butadiene styrene via a multiscale analysis process PQK Nguyen, N Zohdi, P Kamlade, R Yang Polymers 14 (20), 4310, 2022 | 10 | 2022 |
| Investigation on mechanical anisotropy of high impact polystyrene fabricated via fused deposition modelling N Zohdi, S Tareq, C Yang International Conference on Mechanical and Manufacturing Engineering …, 2019 | 6 | 2019 |
| Evaluation on Material Anisotropy of Acrylonitrile Butadiene Styrene Printed via Fused Deposition Modelling N Zohdi, PQK Nguyen, RC Yang Applied Sciences 14 (5), 1870, 2024 | 2 | 2024 |
| Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review. Polymers 2021, 13, 3368 N Zohdi, R Yang s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2021 | 1 | 2021 |
| Study on material behaviours of additively manufactured high-impact polystyrene using artificial neural networks PQK Nguyen, N Zohdi, YX Zhang, Z Zhang, R Yang Progress in Additive Manufacturing, 1-18, 2024 | | 2024 |
| [In Press] Study on material behaviors of additively manufactured high-impact polystyrene using artififical neural networks PQK Nguyen, N Zohdi, YS Zhang, ZL Zhang, C Yang Progress in Additive Manufacuring, 2024 | | 2024 |
| Finite Element Modelling of Additively Manufactured Acrylonitrile Butadiene Styrene P Nguyen, N Zohdi, RC Yang Proceedings for the Fifth Australasian Conference on Computational Mechanics …, 2021 | | 2021 |
| Multiscale Modelling of Additively Manufactured High Impact Polystyrene P Kamlade, N Zohdi, RC Yang Proceedings for the Fifth Australasian Conference on Computational Mechanics …, 2021 | | 2021 |
| Wet-spinning of polyacrylonitrile-boron nitride Nano-composite fibres to process carbon fibres with higher carbon fibre-epoxy matrix compatibility NZ ,Seyed Mousa Fakhrhoseini, Sulley Li, Minoo Naebe CARBON FIBRE FUTURE DIRECTIONS CONFERENCE, 2017 | | 2017 |
| Adsorption of Boron Using Modified Multiwalled Carbon Nanotubes N Zohdi Universiti Putra Malaysia, 2013 | | 2013 |
Richard (Chunhui) YangWestern Sydney University在 westernsydney.edu.au 的电子邮件经过验证
