| Effects of grit blasting on surface properties of steel substrates KP Chander, M Vashista, K Sabiruddin, S Paul, PP Bandyopadhyay Materials & Design 30 (8), 2895-2902, 2009 | 106 | 2009 |
| Plasma and HVOF sprayed WC–Co coatings as hard chrome replacement solution S Hazra, K Sabiruddin, PP Bandyopadhyay Surface Engineering 28 (1), 37-43, 2012 | 73 | 2012 |
| Analysis of phase transformation in plasma sprayed alumina coatings using Rietveld refinement K Sabiruddin, J Joardar, PP Bandyopadhyay Surface and Coatings Technology 204 (20), 3248-3253, 2010 | 68 | 2010 |
| FIB assisted study of plasma sprayed splat–substrate interfaces: NiAl–stainless steel and alumina–NiAl combinations G Bolelli, K Sabiruddin, L Lusvarghi, E Gualtieri, S Valeri, ... Surface and Coatings Technology 205 (2), 363-371, 2010 | 43 | 2010 |
| Variation of splat shape with processing conditions in plasma sprayed alumina coatings K Sabiruddin, PP Bandyopadhyay, G Bolelli, L Lusvarghi Journal of Materials Processing Technology 211 (3), 450-462, 2011 | 40 | 2011 |
| Measuring mechanical properties of plasma-sprayed alumina coatings by nanoindentation technique B Dhakar, S Chatterjee, K Sabiruddin Materials Science and Technology 33 (3), 285-293, 2017 | 33 | 2017 |
| Characterization and tribological behaviour of Indian clam seashell-derived hydroxyapatite coating applied on titanium alloy by plasma spray technique S Hussain, ZA Shah, K Sabiruddin, AK Keshri Journal of the Mechanical Behavior of Biomedical Materials 137, 105550, 2023 | 28 | 2023 |
| Phase stabilization of plasma-sprayed alumina coatings by spraying mechanically blended alumina–chromia powders B Dhakar, S Chatterjee, K Sabiruddin Materials and Manufacturing Processes 32 (4), 355-364, 2017 | 28 | 2017 |
| Application of the analytic hierarchy process for optimization of process parameters in GMAW K Sabiruddin, S Das, A Bhattacharya Indian Welding Journal 42 (1), 38-46, 2009 | 23 | 2009 |
| Selection of appropriate process parameters for gas metal arc welding of medium carbon steel specimens K Sabiruddin, S Bhattacharya, S Das International Journal of the Analytic Hierarchy Process 5 (2), 2013 | 22 | 2013 |
| Effect of heat treatment on the synthesis of hydroxyapatite from Indian clam seashell by hydrothermal method S Hussain, K Sabiruddin Ceramics International 47 (21), 29660-29669, 2021 | 18 | 2021 |
| An investigation on D-gun sprayed Al2O3-SiC coatings V Sharma, S Kazi Surface and Coatings Technology 375, 303-314, 2019 | 14 | 2019 |
| Synthesis of eggshell based hydroxyapatite using hydrothermal method S Hussain, K Sabiruddin IOP Conference Series: Materials Science and Engineering 1189 (1), 012024, 2021 | 13 | 2021 |
| Heat treatment of plasma sprayed alumina-chromia composite coatings B Dhakar, A Namdeo, S Chatterjee, K Sabiruddin Surface Engineering 34 (10), 737-746, 2018 | 13 | 2018 |
| Influence of process parameters on the formation of phases and mechanical properties of plasma sprayed Al2O3–Cr2O3 coatings B Dhakar, S Chatterjee, K Sabiruddin Materials Research Innovations 21 (6), 367-376, 2017 | 13 | 2017 |
| Scratch induced damage in alumina splats deposited on bond coats K Sabiruddin, PP Bandyopadhyay Journal of Materials Processing Technology 211 (4), 553-559, 2011 | 11 | 2011 |
| Determination of significant factors affecting the bending strength of weld joint prepared by gas metal arc welding V Pandhare, P Rai, BK Lad, S Das, K Sabiruddin Int J Mech Eng Res Technol 2 (1), 1-10, 2016 | 8 | 2016 |
| A comparative study of sand-blasted and electro-discharge-machined surfaces of steel substrates V Sharma, K Sabiruddin Sādhanā 45 (1), 50, 2020 | 7 | 2020 |
| Oxidation behaviour of D-gun sprayed Al2O3-3 wt% SiC coating V Sharma, S Kazi Surface and Coatings Technology 383, 125238, 2020 | 6 | 2020 |
| Linear reciprocating wear behaviour of plasma-sprayed Al2O3–Cr2O3 coatings at different loading and sliding conditions B Dhakar, S Chatterjee, K Sabiruddin Sādhanā 42, 1763-1772, 2017 | 6 | 2017 |
Balmukund DhakarIndian Institute of Technology, Indore, MP, India在 iiti.ac.in 的电子邮件经过验证
