| Dimensional stability of SBR-modified cementitious mixtures for use in 3D additive construction KK Kim, J Yeon, HJ Lee, JH Yeon Applied Sciences 9 (16), 3386, 2019 | 18 | 2019 |
| Compressive and flexural strengths of EVA-modified mortars for 3D additive construction KS Yeon, KK Kim, J Yeon, HJ Lee Materials 12 (16), 2600, 2019 | 13 | 2019 |
| Feasibility study of SBR-modified cementitious mixtures for use as 3D additive construction materials KK Kim, J Yeon, HJ Lee, KS Yeon Polymers 11 (8), 1321, 2019 | 9 | 2019 |
| Strength development characteristics of SBR-modified cementitious mixtures for 3-demensional concrete printing KK Kim, J Yeon, HJ Lee, KS Yeon Sustainability 11 (15), 4164, 2019 | 8 | 2019 |
| Deformability in unsaturated polyester resin-based concrete: Effects of the concentration of shrinkage-reducing agent and type of filler JH Yeon, HJ Lee, J Yeon Materials 13 (3), 727, 2020 | 7 | 2020 |
| Optimizing reinforcing steel in 12-in and 13-in continuously reinforced concrete pavement (CRCP) H Lee, N Koirala, F Rouzmehr, C Jabonero, MC Won Texas Tech University. Center for Multidisciplinary Research in Transportation, 2023 | 4 | 2023 |
| Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion KS Yeon, KK Kim, J Yeon, HJ Lee Materials 12 (14), 2292, 2019 | 3 | 2019 |
| Improvements in the design and construction of transverse construction joints in continuously reinforced concrete pavement HJ Lee, N Koirala, C Jabonero, M Won International Journal of Pavement Engineering 25 (1), 2316826, 2024 | 1 | 2024 |
| A case study on distresses of concrete pavements supported on a retaining wall H Lee, N Koirala, P Choi, H Seo Applied Sciences 13 (20), 11226, 2023 | 1 | 2023 |
| MWCNT 혼입 모르타르의 전극간격에 따른 전도발열 특성 연정흠， 최준혁， 오택근， 이희준 한국콘크리트학회 학술대회 논문집 31 (1), 741-742, 2019 | 1 | 2019 |
| 3D 콘크리트 프린팅용 시멘트 복합재료의 굳기 전 성질 시험방법 이희준， 김관규， 연정흠， 연규석 한국콘크리트학회 학술대회 논문집 31 (1), 753-754, 2019 | 1 | 2019 |
| Optimizing Reinforcing Steel in 12-inch and 13-inch Continuously Reinforced Concrete Pavement (CRCP)[Project Summary] M Won, SW Bae Texas Tech University. Center for Multidisciplinary Research in Transportation, 2022 | | 2022 |
| STRENGTH CHARACTERISTICS OF SBR LATEX-MODIFIED COMPOSITES FOR 3D CONCRETE PRINTING JUNG HEUM YEON KKYU KIM, H LEE Infrastructure Management, Assessment and Rehabilitation, 56, 2021 | | 2021 |
| 다중 전이온도 상변화물질을 혼입한 모르타르의 열적 특성 평가 오택근， 최준혁， 이희준， 연정흠 한국콘크리트학회 학술대회 논문집 31 (1), 723-724, 2019 | | 2019 |
| 상변화물질을 활용한 콘크리트 포장의 동결융해 저항성 향상 최준혁， 오택근， 이희준， 연정흠 한국도로학회 학술대회 발표논문 초록집, 19-19, 2019 | | 2019 |
| 재유화형 분말수지를 사용한 프린팅 콘크리트의 강도특성 이희준， 김관규， 김진효， 강원호， 연규석 한국콘크리트학회 학술대회 논문집 30 (2), 675-676, 2018 | | 2018 |
| 고흡수성폴리머를 혼입한 모르타르의 열팽창계수 특성 김익현， 최준혁， 이희준， 연정흠 한국콘크리트학회 학술대회 논문집 30 (2), 541-542, 2018 | | 2018 |
| 고흡수성폴리머를 혼입한 고강도 모르타르의 수축균열 특성 평가 배찬재， 김관규， 이희준， 최기봉， 연정흠 한국콘크리트학회 학술대회 논문집 30 (1), 661-662, 2018 | | 2018 |
| 폴리머 개질제 함량에 따른 프린팅 콘크리트의 강도특성 이희준， 김관규， 김진효， 연규석 한국콘크리트학회 학술대회 논문집 30 (1), 241-242, 2018 | | 2018 |
| 고흡수성 폴리머를 혼입한 모르타르의 단기 압축 크리프 거동 특성 안성진， 배찬재， 이희준， 최기봉， 연정흠 한국콘크리트학회 학술대회 논문집 29 (2), 727-728, 2017 | | 2017 |
