| A comparative study of RANS-based turbulence models for an upscale wind turbine blade PI Muiruri, OS Motsamai, R Ndeda SN Applied Sciences 1 (3), 237, 2019 | 29 | 2019 |
| Three dimensional cfd simulations of a wind turbine blade section; validation PI Muiruri, OS Motsamai J. Eng. Sci. Technol. Rev 11 (1), 138-145, 2018 | 24 | 2018 |
| Optimization of polygonal cross-sectioned conformal cooling channels in injection molding LW Simiyu, JM Mutua, PI Muiruri, BW Ikua International Journal on Interactive Design and Manufacturing (IJIDeM) 18 (3 …, 2024 | 9 | 2024 |
| A comprehensive experimental characterization of cement mortar containing sodium sulfate dehydrate/calcium chloride hexahydrate/graphite shape-stable PCM for enhanced thermal … MB Belete, E Murimi, PI Muiruri, J Munyalo Results in Engineering 22, 102028, 2024 | 3 | 2024 |
| Three-dimensional effects of trailing edge flap and winglet integrated on up-scale wind turbine blade OS Motsamai, PI Muiruri IOP Conference Series: Earth and Environmental Science 354 (1), 012083, 2019 | 3 | 2019 |
| Thermal performance analysis of near infra-red reflection and green roof cooling techniques on buildings made of mild steel NP Mdlalose, M Muvengei, P Muiruri, U Mutwiwa Renewable Energy and Environmental Sustainability 8, 13, 2023 | 1 | 2023 |
| Computational Effects of Winglet Tilted Within Range of-45° and+ 45° on the Up-Scale Wind Turbine Blade Using CFD. PI Muiruri, OS Motsamai Mathematical Modelling of Engineering Problems 7 (1), 2020 | 1 | 2020 |
| Application of Advanced Phase Change Materials in Buildings in Tropical Climates: A Review MB Belete, E Murimi, PI Muiruri, J Munyalo Proceedings of the Sustainable Research and Innovation Conference, 88-96, 2024 | | 2024 |
| Geometrical Parameter Optimization of Circular Cross-Section Conformal Cooling Channels in Injection Molds of Plastic Paving Block Molds LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SN Gacharu International Journal of Engineering Research in Africa 70, 37-51, 2024 | | 2024 |
| Effect of conformal cooling design on residual stresses in injection molded parts LW Simiyu, JM Mutua, PI Muiruri, BW Ikua International Journal on Interactive Design and Manufacturing (IJIDeM), 1-16, 2024 | | 2024 |
| Robust Multi-Response Optimization of Productivity and Product Quality in Injection Molding using Taguchi Grey Technique LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SG Ngigi | | 2024 |
| Simultaneous Optimization of Product Quality and Productivity for Multi-Factor designs of Circular Cross-Section Conformal Cooling Channels in Injection Molds LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SN Gacharu | | 2023 |
| Multi-objective Optimization of Conformal Cooling Channel Design in Injection Molds Using Taguchi Grey Relational analysis LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SN Gacharu | | 2023 |
| Fatigue Loads Mitigation on Horizontal Axis Wind Turbines Using Aerodynamic Devices. A Survey PI Muiruri, OS Motsamai Journal of Engineering Science and Technology Review 10 (5), 144 - 152, 2017 | | 2017 |
Oboetswe Seraga MotsamaiProfessor of mechanical. University of Botswana在 mopipi.ub.bw 的电子邮件经过验证
