Three-dimensional transient temperature field of brake shoe during hoist’s emergency braking Z Zhu, Y Peng, Z Shi, G Chen Applied Thermal Engineering 29 (5-6), 932-937, 2009 | 82 | 2009 |
A novel fault diagnosis method of rotating machinery via VMD, CWT and improved CNN J Gu, Y Peng, H Lu, X Chang, G Chen Measurement 200, 111635, 2022 | 69 | 2022 |
The friction and wear properties of steel wire rope sliding against itself under impact load Y Peng, X Chang, S Sun, Z Zhu, X Gong, S Zou, W Xu, ZT Mi Wear 400, 194-206, 2018 | 58 | 2018 |
Experimental study on the anti-fouling effects of Ni–Cu–P-PTFE deposit surface of heat exchangers YH Cheng, HY Chen, ZC Zhu, TC Jen, YX Peng Applied thermal engineering 68 (1-2), 20-25, 2014 | 55 | 2014 |
An improved complementary ensemble empirical mode decomposition method and its application in rolling bearing fault diagnosis J Gu, Y Peng Digital Signal Processing 113, 103050, 2021 | 52 | 2021 |
Experimental investigation of mechanical response and fracture failure behavior of wire rope with different given surface wear XD Chang, YX Peng, ZC Zhu, XS Gong, ZF Yu, ZT Mi, CM Xu Tribology international 119, 208-221, 2018 | 52 | 2018 |
Discrete element method simulations of the inter-particle contact parameters for the mono-sized iron ore particles T Li, Y Peng, Z Zhu, S Zou, Z Yin Materials 10 (5), 520, 2017 | 44 | 2017 |
Influence of braking pressure on tribological performance of non‐asbestos brake shoe for mine hoister during emergency braking J Bao, Z Zhu, M Tong, Y Yin, Y Peng Industrial lubrication and tribology 64 (4), 230-236, 2012 | 44 | 2012 |
Breaking failure analysis and finite element simulation of wear-out winding hoist wire rope X Chang, Y Peng, Z Zhu, X Gong, Z Yu, Z Mi, C Xu Engineering Failure Analysis 95, 1-17, 2019 | 43 | 2019 |
Fretting tribological behaviors of steel wires under lubricating grease with compound additives of graphene and graphite Z Sun, C Xu, Y Peng, Y Shi, Y Zhang Wear 454, 203333, 2020 | 42 | 2020 |
Dynamic friction transmission and creep characteristics between hoisting rope and friction lining D Wang, D Zhang, X Mao, Y Peng, S Ge Engineering Failure Analysis 57, 499-510, 2015 | 42 | 2015 |
Friction, wear and residual strength properties of steel wire rope with different corrosion types X Chang, H Huang, Y Peng, S Li Wear 458, 203425, 2020 | 35 | 2020 |
Friction and wear of liner and grinding ball in iron ore ball mill Y Peng, X Ni, Z Zhu, Z Yu, Z Yin, T Li, S Liu, J Xu Tribology International 115, 506-517, 2017 | 35 | 2017 |
A comparative study on microstructure evolution and wear resistance of different-sized tungsten carbide modified Fe-based laser cladding coatings J Li, Z Zhu, Y Peng, G Shen Optics & Laser Technology 147, 107672, 2022 | 34 | 2022 |
Phase evolution and wear resistance of in-situ synthesized (Cr, W) 23C6-WC composite ceramics reinforced Fe-based composite coatings produced by laser cladding J Li, Z Zhu, Y Peng, G Shen Vacuum 190, 110242, 2021 | 34 | 2021 |
Fretting friction and wear of steel wires in tension-torsion and helical contact form C Xu, Y Peng, Z Zhu, H Lu, G Chen, D Wang, X Peng, S Wang Wear 432, 202946, 2019 | 33 | 2019 |
Impact load behavior between different charge and lifter in a laboratory-scale mill Z Yin, Y Peng, Z Zhu, Z Yu, T Li Materials 10 (8), 882, 2017 | 31 | 2017 |
Effects of strand lay direction and crossing angle on tribological behavior of winding hoist rope X Chang, Y Peng, Z Zhu, X Gong, Z Yu, Z Mi, C Xu Materials 10 (6), 630, 2017 | 29 | 2017 |
In-situ synthesized novel eyeball-like Al2O3/TiC composite ceramics reinforced Fe-based alloy coating produced by laser cladding Z Zhu, J Li, Y Peng, G Shen Surface and Coatings Technology 391, 125671, 2020 | 28 | 2020 |
Effect of tension on friction coefficient between lining and wire rope with low speed sliding YX Peng, Z ZHU, G CHEN, GH Cao Journal of China University of Mining and Technology 17 (3), 409-413, 2007 | 28 | 2007 |