| 喷丸法制备 TC4 合金表层纳米晶及机制研究 刘印刚 西北工业大学, 2016 | | 2016 |
| 钛合金表层机械处理的纳米化组织, 力学性能与机理研究进展 李慧敏， 李淼泉， 刘印刚， 刘洪杰 The Chinese Journal of Nonferrous Metals, 2015 | 4 | 2015 |
| 叶片精密锻造过程数值模拟技术研究进展 杨舜， 李宏， 刘印刚， 李淼泉 精密成形工程, 44-51, 2015 | 1 | 2015 |
| A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles Q Tan, J Zhang, N Mo, Z Fan, Y Yin, M Bermingham, Y Liu, H Huang, ... Additive Manufacturing 32, 101034, 2020 | 148 | 2020 |
| A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting Q Tan, Z Fan, X Tang, Y Yin, G Li, D Huang, J Zhang, Y Liu, F Wang, T Wu, ... Materials Science and Engineering: A 821, 141638, 2021 | 86 | 2021 |
| Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement J Zhang, Y Liu, M Bayat, Q Tan, Y Yin, Z Fan, S Liu, JH Hattel, ... Scripta Materialia 191, 155-160, 2021 | 78 | 2021 |
| Additive manufacturing of high strength copper alloy with heterogeneous grain structure through laser powder bed fusion Y Liu, J Zhang, Q Tan, Y Yin, S Liu, M Li, M Li, Q Liu, Y Zhou, T Wu, ... Acta Materialia 220, 117311, 2021 | 50 | 2021 |
| Characteristics and formation mechanisms of defects in surface layer of TC17 subjected to high energy shot peening C Yang, YG Liu, MQ Li Applied Surface Science 509, 144711, 2020 | 27 | 2020 |
| Characteristics of martensite transformed from deformed austenite with various states of ultrahigh strength 300M steel ML Yingang Liu Materials Characterization 144, 490-497, 2018 | 17 | 2018 |
| Characterization of face-centered cubic structure and deformation mechanisms in high energy shot peening process of TC17 C Yang, MQ Li, YG Liu Journal of Materials Science & Technology 110, 136-151, 2022 | 7 | 2022 |
| Characterization of surface layer in TC17 alloy treated by air blast shot peening YG Liu, HM Li, MQ Li Materials & Design (1980-2015) 65, 120-126, 2015 | 97 | 2015 |
| Deformation induced face-centered cubic titanium and its twinning behavior in Ti–6Al–4V YG Liu, MQ Li, HJ Liu Scripta Materialia 119, 5-8, 2016 | 59 | 2016 |
| Deformation mechanisms of nanocrystalline alpha titanium in Ti-6Al-4V YG Liu, MQ Li Materials Letters 185, 488-490, 2016 | 18 | 2016 |
| Designing against phase and property heterogeneities in additively manufactured titanium alloys J Zhang, Y Liu, G Sha, S Jin, Z Hou, M Bayat, N Yang, Q Tan, Y Yin, S Liu, ... Nature communications 13 (1), 4660, 2022 | 50 | 2022 |
| Development of processing map coupling grain size for the isothermal compression of 300 M steel HM Sun, MQ Li, YG Liu Materials Science and Engineering: A 595, 77-85, 2014 | 24 | 2014 |
| Effect of cooling rate on microstructure and mechanical properties of a low-carbon low-alloy steel G Liang, Q Tan, Y Liu, T Wu, X Yang, Z Tian, A Atrens, MX Zhang Journal of Materials Science 56, 3995-4005, 2021 | 27 | 2021 |
| Effect of heating temperature and heating rate on Austenite in the heating process of 300M steel YG Liu, MQ Li, XL Dang Materials Science Forum 749, 260-267, 2013 | 3 | 2013 |
| Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy Q Tan, Y Liu, Z Fan, J Zhang, Y Yin, MX Zhang Journal of Materials Science & Technology 58, 34-45, 2020 | 135 | 2020 |
| Enhancing specific energy absorption of additively manufactured titanium lattice structures through simultaneous manipulation of architecture and constituent material J Zhang, Y Liu, BB Babamiri, Y Zhou, M Dargusch, K Hazeli, MX Zhang Additive Manufacturing 55, 102887, 2022 | 29 | 2022 |
| Further refinement mechanisms of nanograins in nanocrystalline surface layer of TC17 subjected to severe plastic deformation C Yang, MQ Li, YG Liu Applied Surface Science 538, 147941, 2021 | 13 | 2021 |
