A case of fibrolipoma in the floor of the mouth that was difficult to differentiate from a sublingual gland tumor A SHIBATA, S KANEMARU, M HASIDUME, M HOSOO, H GOTO, ... Journal of The Japanese Stomatological Society 65 (3), 264-269, 2016 | | 2016 |
A Case of Silicone Implant Removed from the Chin Because of Odontogenic Infection A SHIBATA, H GOTO, T SHIMIZU, D HASEBE, J NOIKE, T YOKOBAYASHI The Japanese Journal of Jaw Deformities 22 (3), 223-227, 2012 | | 2012 |
A novel ultrafine-grained Fe22Mn0. 6C TWIP steel with superior strength and ductility YZ Tian, Y Bai, LJ Zhao, S Gao, HK Yang, A Shibata, ZF Zhang, N Tsuji Materials Characterization 126, 74-80, 2017 | 94 | 2017 |
Abnormally large Ni grains epitaxially grown by electrodeposition on Cu substrate T Uemura, TFM Chang, A Shibata, M Sone Thin solid films 529, 385-388, 2013 | 7 | 2013 |
Analysis of deformation-included martensitic transformation in Fe-Ni-C alloy by measuring in-situ local stress field with synchrotron radiation A Matsumoto, M Chen, A Shibata, N Tsuji, T Miyazawa, M Sato | | 2014 |
Anticorrosive, Uniform Au Coating by Electroplating Using Emulsion of Dense CO2 in Electroplating Solution M Sone, K Fujii, T Nagai, BH Woo, A Shibata, C Ishiyama, Y Higo | | |
Breaking the strength-ductility trade-off in ultrafine-grained bimodal microstructure of Ti-6Al-4V alloy Y Chong, T Bhattacharjee, A Shibata, N Tsuji International Conference on Nanostructured Materials (NANO 2020), 76, 2020 | | 2020 |
Bright nickel film deposited by supercritical carbon dioxide emulsion using additive-free Watts bath TFM Chang, M Sone, A Shibata, C Ishiyama, Y Higo Electrochimica Acta 55 (22), 6469-6475, 2010 | 92 | 2010 |
Challenging ultra grain refinement of ferrite in low-C steel only by heat treatment M Park, A Shibata, N Tsuji Frontiers in Materials 7, 604792, 2020 | 6 | 2020 |
Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy R Zheng, T Bhattacharjee, A Shibata, T Sasaki, K Hono, N Tsuji IOP Conference Series: Materials Science and Engineering 194 (1), 012016, 2017 | 1 | 2017 |
Change of deformation mechanisms leading to high strength and large ductility in Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained microstructures R Zheng, T Bhattacharjee, S Gao, W Gong, A Shibata, T Sasaki, K Hono, ... Scientific Reports 9 (1), 11702, 2019 | 64 | 2019 |
Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel K Okada, A Shibata, N Tsuji Scripta Materialia 234, 115568, 2023 | 6 | 2023 |
Characteristics of Deformation Induced Martensite in SUS304 Austenitic Stainless Steel Deformed at RT and− 60° C M Chen, S Gao, D Terada, A Shibata, N Tsuji Proceedings of the 8 th Pacific Rim International Congress on Advanced …, 2016 | 1 | 2016 |
Characteristics of hydrogen-related fatigue fracture in 2Mn-0.1 C martensitic steel H Matsumiya, A Shibata, K Okada, N Tsuji International Journal of Hydrogen Energy 46 (75), 37509-37517, 2021 | 4 | 2021 |
Characterization of cold-rolled heterogeneous microstructure formed by multimodal deformation in an Fe-Ni-Al-C alloy with lattice softening T Furuta, I Miyazaki, K Oh-ishi, S Kuramoto, A Shibata, N Tsuji Materials & Design 153, 166-176, 2018 | 7 | 2018 |
Characterization of deformation-induced structural change of Pd {sub 78} Cu {sub 6} Si {sub 16} metallic glass using a micro-sized cantilever-beam specimen A Shibata, M Sone, Y Higo Scripta Materialia 62, 2010 | | 2010 |
Characterization of deformation-induced structural change of Pd78Cu6Si16 metallic glass using a micro-sized cantilever-beam specimen A Shibata, M Sone, Y Higo Scripta Materialia 62 (5), 309-312, 2010 | 13 | 2010 |
Characterization of hydrogen-related fracture behavior in as-quenched low-carbon martensitic steel and tempered medium-carbon martensitic steel A Shibata, T Murata, H Takahashi, T Matsuoka, N Tsuji Metallurgical and Materials Transactions A 46, 5685-5696, 2015 | 81 | 2015 |
Characterization of local deformation behavior of Fe–Ni lenticular martensite by nanoindentation L Zhang, T Ohmura, A Shibata, K Tsuzaki Materials Science and Engineering: A 527 (7-8), 1869-1874, 2010 | 27 | 2010 |
Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing G Deng, T Bhattacharjee, Y Chong, R Zheng, Y Bai, A Shibata, N Tsuji IOP Conference Series: Materials Science and Engineering 194 (1), 012020, 2017 | 9 | 2017 |