Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion MG Jiang, C Xu, H Yan, GH Fan, T Nakata, CS Lao, RS Chen, S Kamado, ... Acta Materialia 157, 53-71, 2018 | 398 | 2018 |
Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion MG Jiang, C Xu, T Nakata, H Yan, RS Chen, S Kamado Materials Science and Engineering: A 667, 233-239, 2016 | 148 | 2016 |
Twinning, recrystallization and texture development during multi-directional impact forging in an AZ61 Mg alloy MG Jiang, H Yan, RS Chen Journal of Alloys and Compounds 650, 399-409, 2015 | 145 | 2015 |
Development of dilute Mg–Zn–Ca–Mn alloy with high performance via extrusion MG Jiang, C Xu, T Nakata, H Yan, RS Chen, S Kamado Journal of Alloys and Compounds 668, 13-21, 2016 | 109 | 2016 |
Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics Z Li, Z Chen, J Liu, Y Fu, C Liu, P Wang, M Jiang, C Lao Virtual and Physical Prototyping 15 (2), 163-177, 2020 | 103 | 2020 |
High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties MG Jiang, C Xu, T Nakata, H Yan, RS Chen, S Kamado Materials Science and Engineering: A 678, 329-338, 2016 | 92 | 2016 |
Enhanced mechanical properties due to grain refinement and texture modification in an AZ61 Mg alloy processed by small strain impact forging MG Jiang, H Yan, RS Chen Materials Science and Engineering: A 621, 204-211, 2015 | 75 | 2015 |
Microstructure, texture and mechanical properties in an as-cast AZ61 Mg alloy during multi-directional impact forging and subsequent heat treatment MG Jiang, H Yan, RS Chen Materials & Design 87, 891-900, 2015 | 69 | 2015 |
Effect of scanning strategy on microstructure and mechanical properties of selective laser melted reduced activation ferritic/martensitic steel CY Liu, JD Tong, MG Jiang, ZW Chen, G Xu, HB Liao, P Wang, XY Wang, ... Materials Science and Engineering: A 766, 138364, 2019 | 66 | 2019 |
Mechanical properties and microstructures of 3D printed bulk cordierite parts Z Chen, C Liu, J Li, J Zhu, Y Liu, C Lao, J Feng, M Jiang, C Liu, P Wang, ... Ceramics International 45 (15), 19257-19267, 2019 | 66 | 2019 |
Correlation between dynamic recrystallization and formation of rare earth texture in a Mg-Zn-Gd magnesium alloy during extrusion MG Jiang, C Xu, H Yan, SH Lu, T Nakata, CS Lao, RS Chen, S Kamado, ... Scientific Reports 8 (1), 16800, 2018 | 59 | 2018 |
Quasi-in-situ observing the rare earth texture evolution in an extruded Mg-Zn-Gd alloy with bimodal microstructure MG Jiang, C Xu, H Yan, T Nakata, ZW Chen, CS Lao, RS Chen, ... Journal of Magnesium and Alloys 9 (5), 1797-1805, 2021 | 47 | 2021 |
Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting MG Jiang, ZW Chen, JD Tong, CY Liu, G Xu, HB Liao, P Wang, XY Wang, ... Materials Research Letters 7 (10), 426-432, 2019 | 46 | 2019 |
Enhancing strength and ductility of Mg-Zn-Gd alloy via slow-speed extrusion combined with pre-forging MG Jiang, C Xu, T Nakata, H Yan, RS Chen, S Kamado Journal of Alloys and Compounds 694, 1214-1223, 2017 | 45 | 2017 |
Strengthening and fracture mechanisms of a precipitation hardening high-entropy alloy fabricated by selective laser melting Y Wu, X Zhao, Q Chen, C Yang, M Jiang, C Liu, Z Jia, Z Chen, T Yang, ... Virtual and Physical Prototyping 17 (3), 451-467, 2022 | 43 | 2022 |
Ordered nitrogen complexes overcoming strength–ductility trade-off in an additively manufactured high-entropy alloy D Zhao, Q Yang, D Wang, M Yan, P Wang, M Jiang, C Liu, D Diao, C Lao, ... Virtual and Physical Prototyping 15 (sup1), 532-542, 2020 | 33 | 2020 |
Development and experimental validation of a hybrid selective laser melting and CNC milling system C Liu, D Yan, J Tan, Z Mai, Z Cai, Y Dai, M Jiang, P Wang, Z Liu, CC Li, ... Additive Manufacturing 36, 101550, 2020 | 27 | 2020 |
Enhanced strength-ductility synergy of selective laser melted reduced activation ferritic/martensitic steel via heterogeneous microstructure modification M Jiang, C Liu, Z Chen, P Wang, H Liao, D Zhao, Z Liu, X Wang, M Xu, ... Materials Science and Engineering: A 801, 140424, 2021 | 23 | 2021 |
Microstructural evolution of Mg-7Al-2Sn Mg alloy during multi-directional impact forging MG Jiang, H Yan, L Gao, RS Chen Journal of Magnesium and Alloys 3 (3), 180-187, 2015 | 21 | 2015 |
Dynamic recrystallization and texture evolution of GW94 Mg alloy during multi-and unidirectional impact forging SSA Shah, MG Jiang, D Wu, U Wasi, RS Chen Acta Metallurgica Sinica (English Letters) 31, 923-932, 2018 | 16 | 2018 |