Study of spot welding of austenitic stainless steel type 304 JB Shamsul, MM Hisyam, T Muhibbah Journal of Applied Sciences Research 3 (11), 1494-1499, 2007 | 107 | 2007 |
Composite cement reinforced coconut fiber: Physical and mechanical properties and fracture behavior A Abdullah, SB Jamaludin, MM Noor, K Hussin Australian Journal of Basic and Applied Sciences 5 (7), 1228-1240, 2011 | 89 | 2011 |
Extraction and separation of Cu (II), Ni (II) and Zn (II) by sol–gel silica immobilized with Cyanex 272 F Bari, N Begum, SB Jamaludin, K Hussin Hydrometallurgy 96 (1-2), 140-147, 2009 | 58 | 2009 |
The development of low cost adsorbents from clay and waste materials: a review WH Chan, MN Mazlee, ZA Ahmad, MAM Ishak, JB Shamsul Journal of Material Cycles and Waste Management 19, 1-14, 2017 | 48 | 2017 |
Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers CMR Ghazali, H Kamarudin, SB Jamaludin, MMAB Abdullah Advanced Materials Research 328, 1636-1641, 2011 | 48 | 2011 |
Simultaneous extraction and separation of Cu (II), Zn (II), Fe (III) and Ni (II) by polystyrene microcapsules coated with Cyanex 272 MF Bari, MS Hossain, IM Mujtaba, SB Jamaluddin, K Hussin Hydrometallurgy 95 (3-4), 308-315, 2009 | 47 | 2009 |
Potential of Palm Oil Clinker as Reinforcement in Aluminium Matrix Composites for Tribological Applications. YB Zamri, JB Shamsul, MM Amin International Journal of Mechanical and Materials Engineering 6 (1), 10-17, 2011 | 41 | 2011 |
Mechanical properties and wear behavior of brake pads produced from palm slag CMR Ghazali, H Kamarudin, JB Shamsul, MMAB Abdullah, AR Rafiza Advanced materials research 341, 26-30, 2012 | 39 | 2012 |
Concrete ceramic waste slab (CCWS) M Abdullah, K Hussin, CM Ruzaidi, S Baharin, R Ramly, NK Nisa Journal of engineering research and education 3, 139-145, 2006 | 39 | 2006 |
Assessment of physical and mechanical properties of cement panel influenced by treated and untreated coconut fiber addition A Abdullah, SB Jamaludin, MI Anwar, MM Noor, K Hussin Physics Procedia 22, 263-269, 2011 | 37 | 2011 |
Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites CMR Ghazali, H Kamarudin, SB Jamaludin, AMM Al Bakri, J Liyana Applied Mechanics and Materials 313, 174-178, 2013 | 33 | 2013 |
Characterization of Fe-Cr-Al2O3 composites fabricated by powder metallurgy method with varying weight percentage of alumina S Shamsuddin, SB Jamaludin, Z Hussain, ZA Ahmad Journal of Physical Science 19 (1), 89-95, 2008 | 33 | 2008 |
Solvent extraction of copper, nickel and zinc by Cyanex N Begum, F Bari, SB Jamaludin, K Hussin International journal of physical sciences 7 (22), 2905-2910, 2012 | 32 | 2012 |
Morphology and wear properties of palm ash and PCB waste brake pad CM Ruzaidi, H Kamarudin, JB Shamsul, AM Al Bakri, A Alida International Conference on Asia Agriculture and Animal 13, 145-149, 2011 | 32 | 2011 |
Effects of magnesium sulfate attack on ordinary portland cement (OPC) mortars MM Amin, SB Jamaludin, FC Pa, KK Chuen Portugaliae Electrochimica Acta 26 (2), 235-242, 2008 | 31 | 2008 |
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite SB Jamaludin, J Hadipramana, MFM Wahid, K Hussin, A Rahmat Advanced Materials Research 795, 578-581, 2013 | 25 | 2013 |
The sintering temperature effect on the shrinkage behavior of cobalt chromium alloy MG Kamardan, NH A Zaidi, MN Dalimin, AM A Zaidi, SB Jamaludin, ... American Journal of Applied Sciences 7 (11), 1443-148, 2010 | 25 | 2010 |
Comparative study of corrosion behavior of AA2014/15 Vol% Al2O3p and AA2009/20 Vol% SiCw SB Jamaludin, Z Yusoff, KR Ahmad Portugaliae Electrochimica Acta 26, 291-301, 2008 | 25 | 2008 |
The influence of alumina particle size on sintered density and hardness of discontinuous reinforced aluminum metal matrix composite KR Ahmad, SB Jamaluddin, LB Hussain, ZA Ahmad Jurnal Teknologi, 49–57-49–57, 2005 | 25 | 2005 |
Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique WH Chan, MN Mazlee, ZA Ahmad, MAM Ishak, JB Shamsul Journal of Material Cycles and Waste Management 19, 794-803, 2017 | 21 | 2017 |