| Application of extended finite element method (XFEM) to simulate hydraulic fracture propagation from oriented perforations J Sepehri, MY Soliman, SM Morse SPE Hydraulic Fracturing Technology Conference and Exhibition, D031S007R006, 2015 | 53 | 2015 |
| Investigation of sequential and simultaneous well completion in horizontal wells using a non-planar, fully coupled hydraulic fracture simulator A Rezaei, M Rafiee, M Soliman, S Morse ARMA US Rock Mechanics/Geomechanics Symposium, ARMA-2015-449, 2015 | 29 | 2015 |
| Protection Refrac: Analysis of pore pressure and stress change due to refracturing of Legacy Wells A Rezaei, M Rafiee, G Bornia, M Soliman, S Morse Unconventional Resources Technology Conference, Austin, Texas, 24-26 July …, 2017 | 23 | 2017 |
| Culvert rating guide WD Lawson, H Seo, JG Surles, SM Morse Texas. Dept. of Transportation, 2017 | 19 | 2017 |
| Analysis of refracturing in horizontal wells: Insights from the poroelastic displacement discontinuity method A Rezaei, G Bornia, M Rafiee, M Soliman, S Morse International journal for numerical and analytical methods in geomechanics …, 2018 | 18 | 2018 |
| Experimental investigation of load sharing in insulating glass units S McMahon, H Scott Norville, SM Morse Journal of Architectural Engineering 24 (1), 04017038, 2018 | 17 | 2018 |
| Experimental and analytical study of galloping of a slender tower D Zuo, L Wu, DA Smith, SM Morse Engineering Structures 132, 44-60, 2017 | 16 | 2017 |
| Comparison of methods to determine load sharing of insulating glass units for environmental loads SM Morse, HS Norville Glass Structures & Engineering 1, 315-329, 2016 | 16 | 2016 |
| Evaluation of matrix swelling behavior in shale induced by methane sorption under triaxial stress and strain conditions Y Pang, S Chen, MY Soliman, SM Morse, X Hu Energy & Fuels 33 (6), 4986-5000, 2019 | 15 | 2019 |
| Application of extended finite element method (XFEM) to simulate hydraulic fracture propagation from oriented perforations J Sepehri | 15 | 2014 |
| Estimation of interstitial velocity using a direct drive high‐resolution passive profiler HA Schneider, WA Jackson, K Rainwater, D Reible, S Morse, ... Groundwater 57 (6), 915-924, 2019 | 13 | 2019 |
| Experimental study of weathered tempered glass plates from the Northeastern United States B Afolabi, HS Norville, SM Morse Journal of Architectural Engineering 22 (3), 04016010, 2016 | 11 | 2016 |
| Wind Engineering Research Field Laboratory Selected Data Sets for Comparison to Model-Scale, Full-Scale and Computational Fluid Dynamics Simulations D Smith, K Mehta, S Morse Wind Eng. Res. F. Lab. Sel. Data Sets Comp. to Model. Full-Scale Comput …, 2018 | 10 | 2018 |
| An analytical method for determining window glass strength SM Morse, HS Norville Proc., Glass Performance Days, 480-482, 2011 | 10 | 2011 |
| Full scale tests of heat strengthened glass with ceramic frit M Bergers, K Natividad, SM Morse, HS Norville Glass Structures & Engineering 1, 261-276, 2016 | 9 | 2016 |
| The potential for fencing to be used as low-cost solar photovoltaic racking S Masna, SM Morse, KS Hayibo, JM Pearce Solar Energy 253, 30-46, 2023 | 8 | 2023 |
| New provisions in ASTM E1300-16: A comparison of the basic and new analytical procedures for determining the load resistance of window glass SM Morse Vol. 2 of Proc., Façade Tectonics 2018 World Congress, edited by D. Noble, K …, 2018 | 8 | 2018 |
| Design methodology for determining the load resistance of heat-treated window glass SM Morse, HS Norville Journal of architectural engineering 18 (1), 42-51, 2012 | 8 | 2012 |
| Low-cost pole and wire photovoltaic racking J Franz, S Morse, JM Pearce Energy for Sustainable Development 68, 501-511, 2022 | 7 | 2022 |
| Application of the Glass Failure Prediction Model to Flat Glass Using Finite-Element Modeling JG Soules, SM Morse, HS Norville Journal of Architectural Engineering 26 (2), 04020005, 2020 | 6 | 2020 |
