Influence of the interphase and associated interfaces on the deflection of matrix cracks in ceramic matrix composites N Carrère, E Martin, J Lamon Composites Part A: Applied Science and Manufacturing 31, 1179-1190, 2000 | 130 | 2000 |
A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates E Martin, D Leguillon, N Carrère International Journal of Solids and Structures 47, 1297-1305, 2010 | 119 | 2010 |
A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate E Martin, D Leguillon, N Carrère International Journal of Solids and Structures 49 (26), 3915-3922, 2012 | 107 | 2012 |
A revisited criterion for crack deflection at an interface in a brittle bimaterial E Martin, D Leguillon, C Lacroix Composites Science and Technology 61 (12), 1671-1679, 2001 | 105 | 2001 |
Interface debonding ahead of a primary crack D Leguillon, C Lacroix, E Martin Journal of the Mechanics and Physics of Solids, 48, 2137-2161, 2000 | 105 | 2000 |
Prediction of crack initiation at blunt notches and cavities - size effects D Leguillon, D Quesada, C Putot, E Martin Engineering Fracture Mechanics 74 (15), 2420-2436, 2007 | 89 | 2007 |
Development of a macroscopic damage model for woven ceramic matrix composites L Marcin, JF Maire, N Carrère, E Martin International Journal of Damage Mechanics 20, 939-957, 2011 | 86 | 2011 |
Conditions for matrix crack deflection at an interface in ceramic matrix composites E Martin, PWM Peters, D Leguillon, JM Quenisset Materials Science and Engineering A 250, 291-302, 1998 | 70 | 1998 |
Mechanical characterization of Si-C(O) fiber/SiC (CVI) matrix composites with a BN-interphase S Prouhet, G Camus, C Labrugere, A Guette, E Martin Journal of the American Ceramic Society 77 (3), 649-656, 1994 | 66 | 1994 |
Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints N Carrere, E Martin, D Leguillon Engineering Fracture Mechanics 138, 185-201, 2015 | 65 | 2015 |
Flexural vs. tensile strength in brittle materials D Leguillon, E Martin, Lafarie-Frenot, Marie-Christine Comptes Rendus Mécanique 343 (4), 275-281, 2015 | 64 | 2015 |
Mechanical properties of SiC/SiC braided tubes for fuel cladding E Rohmer, E Martin, C Lorrette Journal of Nuclear Materials 453 (1-3), 16-21, 2014 | 63 | 2014 |
Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loading V Herb, E Martin, G Couégnat Composites Part A: Applied Science and Manufacturing 43, 247-253, 2012 | 63 | 2012 |
Energetic conditions for interfacial failure in the vicinity of a matrix crack in brittle matrix composites E Martin, D Leguillon International Journal of Solids and Structures 41, 6937-6948, 2004 | 60 | 2004 |
Microstructure and mechanical behaviour of a Nextel™610/alumina weak matrix composite subjected to tensile and compressive loadings C Ben Ramdane, A Julian-Jankowiak, R Valle, Y Renollet, M Parlier, ... Journal of the European Ceramic Society 37, 2919-2932, 2017 | 59 | 2017 |
Damage assessment of thin SiC/SiC composite plates subjected to quasi-static indentation loading V Herb, G Couégnat, E Martin Composites Part A: Applied Science and Manufacturing 41, 1677-1685, 2010 | 59 | 2010 |
Competition between deflection and penetration at an interface in the vicinity of a main crack E Martin, B Poitou, D Leguillon, JM Gatt International Journal of Fracture 151 (2), 247-268, 2008 | 58 | 2008 |
Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: effect of material and geometrical parameters JYC A. Moradi, N. Carrère, D. Leguillon, E. Martin International Journal of Adhesion & Adhesives 47, 73-82, 2013 | 55 | 2013 |
Initiation of edge debonding : Coupled criterion versus cohesive zone model E Martin, T Vandellos, D Leguillon, N Carrère International Journal of Fracture 199, 157-168, 2016 | 52 | 2016 |
Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon composites M Ferraris, A Ventrella, M Salvo, M Avalle, F Pavia, E Martin Composites Part B: Engineering 42, 182-191, 2010 | 52 | 2010 |