| The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: Experiments and finite element … M Aguayo, S Das, A Maroli, N Kabay, JCE Mertens, SD Rajan, G Sant, ... Cement and Concrete Composites 73, 29-41, 2016 | 166 | 2016 |
| Effective properties of a fly ash geopolymer: Synergistic application of X-ray synchrotron tomography, nanoindentation, and homogenization models S Das, P Yang, SS Singh, JCE Mertens, X Xiao, N Chawla, N Neithalath Cement and Concrete Research 78, 252-262, 2015 | 134 | 2015 |
| Spall strength dependence on grain size and strain rate in tantalum TP Remington, EN Hahn, S Zhao, R Flanagan, JCE Mertens, ... Acta Materialia 158, 313-329, 2018 | 122 | 2018 |
| Rapid solidification growth mode transitions in Al-Si alloys by dynamic transmission electron microscopy JD Roehling, DR Coughlin, JW Gibbs, JK Baldwin, JCE Mertens, ... Acta Materialia 131, 22-30, 2017 | 73 | 2017 |
| In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale BM Patterson, NL Cordes, K Henderson, JCE Mertens, AJ Clarke, ... Experimental Mechanics 56, 1585-1597, 2016 | 54 | 2016 |
| Development of a lab-scale, high-resolution, tube-generated X-ray computed-tomography system for three-dimensional (3D) materials characterization JCE Mertens, JJ Williams, N Chawla Materials Characterization 92, 36-48, 2014 | 41 | 2014 |
| Electromigration mechanisms in Sn-0.7 Cu/Cu couples by four dimensional (4D) X-ray microtomography and electron backscatter diffraction (EBSD) JCE Mertens, A Kirubanandham, N Chawla Acta Materialia 102, 220-230, 2016 | 34 | 2016 |
| Multiscale 3D characterization of discontinuities in underwater wet welds LF Silva, VR Dos Santos, S Paciornik, JCE Mertens, N Chawla Materials Characterization 107, 358-366, 2015 | 27 | 2015 |
| Accurate stochastic reconstruction of heterogeneous microstructures by limited x‐ray tomographic projections H Li, S Kaira, J Mertens, N Chawla, Y Jiao Journal of microscopy 264 (3), 339-350, 2016 | 25 | 2016 |
| Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography JCE Mertens, K Henderson, NL Cordes, R Pacheco, X Xiao, JJ Williams, ... Journal of Materials Science 52, 12185-12206, 2017 | 23 | 2017 |
| From solidification processing to microstructure to mechanical properties: A multi-scale X-ray study of an Al-Cu alloy sample D Tourret, JCE Mertens, E Lieberman, SD Imhoff, JW Gibbs, K Henderson, ... Metallurgical and Materials Transactions A 48, 5529-5546, 2017 | 19 | 2017 |
| Modular high resolution X-ray computed tomography system JCE Mertens, JJ Williams, N Chawla US Patent 9,791,385, 2017 | 12 | 2017 |
| Microstructural quantification and property prediction using limited X-ray tomography data H Li, S Singh, C Shashank Kaira, JCE Mertens, JJ Williams, N Chawla, ... JOM 68, 2288-2295, 2016 | 11 | 2016 |
| Note: Design and construction of a multi-scale, high-resolution, tube-generated X-Ray computed-tomography system for three-dimensional (3D) imaging JCE Mertens, JJ Williams, N Chawla Review of Scientific Instruments 85 (1), 2014 | 11 | 2014 |
| A Study of Pb-Rich Dendrites in a Near-Eutectic 63Sn-37Pb Solder Microstructure via Laboratory-Scale Micro X-ray Computed Tomography (μXCT) JCE Mertens, JJ Williams, N Chawla Journal of electronic materials 43, 4442-4456, 2014 | 10 | 2014 |
| In situ fixture for multi-modal characterization during electromigration and thermal testing of wire-like microscale specimens JCE Mertens, A Kirubanandham, N Chawla Microelectronics Reliability 55 (11), 2345-2353, 2015 | 7 | 2015 |
| Modeling and characterization of X-ray yield in a polychromatic, lab-scale, X-ray computed tomography system JCE Mertens, N Chawla Nuclear Instruments and Methods in Physics Research Section A: Accelerators …, 2015 | 7 | 2015 |
| A method for zinger artifact reduction in high-energy x-ray computed tomography JCE Mertens, JJ Williams, N Chawla Nuclear Instruments and Methods in Physics Research Section A: Accelerators …, 2015 | 6 | 2015 |
| Crack bridging modelling in Bioglass® based scaffolds reinforced by poly-vinyl alcohol/microfibrillated cellulose composite coating M Kotoul, P Skalka, O Ševeček, L Bertolla, J Mertens, P Marcián, ... Mechanics of Materials 110, 16-28, 2017 | 5 | 2017 |
| A custom lab-scale high resolution x-ray computed tomography system for 4D materials science: Imaging performance modeling and characterization JCE Mertens, N Chawla Developments in X-Ray Tomography IX, 92121E, 2014 | 4 | 2014 |
