| Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels J Kadkhodapour, S Schmauder, D Raabe, S Ziaei-Rad, U Weber, ... Acta Materialia 59 (11), 4387-4394, 2011 | 415 | 2011 |
| Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell J Kadkhodapour, H Montazerian, AC Darabi, AP Anaraki, SM Ahmadi, ... Journal of the mechanical behavior of biomedical materials 50, 180-191, 2015 | 372 | 2015 |
| Mechanisms of void formation during tensile testing in a commercial, dual-phase steel J Kadkhodapour, A Butz, SZ Rad Acta Materialia 59 (7), 2575-2588, 2011 | 340 | 2011 |
| Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures M Afshar, AP Anaraki, H Montazerian, J Kadkhodapour Journal of the mechanical behavior of biomedical materials 62, 481-494, 2016 | 287 | 2016 |
| Porous scaffold internal architecture design based on minimal surfaces: a compromise between permeability and elastic properties H Montazerian, E Davoodi, M Asadi-Eydivand, J Kadkhodapour, ... Materials & Design 126, 98-114, 2017 | 272 | 2017 |
| A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model J Kadkhodapour, A Butz, S Ziaei-Rad, S Schmauder International Journal of Plasticity 27 (7), 1103-1125, 2011 | 259 | 2011 |
| Additively manufactured metallic biomaterials E Davoodi, H Montazerian, AS Mirhakimi, M Zhianmanesh, O Ibhadode, ... Bioactive materials 15, 214-249, 2022 | 171 | 2022 |
| Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures A Zargarian, M Esfahanian, J Kadkhodapour, S Ziaei-Rad Materials Science and Engineering: C 60, 339-347, 2016 | 146 | 2016 |
| Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure J Kadkhodapour, H Montazerian, S Raeisi Materials Science and Engineering: C 43, 587-597, 2014 | 146 | 2014 |
| The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials J Kadkhodapour, H Montazerian, AC Darabi, A Zargarian, S Schmauder Journal of the mechanical behavior of biomedical materials 70, 28-42, 2017 | 106 | 2017 |
| 2D triangular anti-trichiral structures and auxetic stents with symmetric shrinkage behavior and high energy absorption R Hamzehei, S Rezaei, J Kadkhodapour, AP Anaraki, A Mahmoudi Mechanics of Materials 142, 103291, 2020 | 91 | 2020 |
| On the fatigue behavior of additive manufactured lattice structures A Zargarian, M Esfahanian, J Kadkhodapour, S Ziaei-Rad, D Zamani Theoretical and Applied Fracture Mechanics 100, 225-232, 2019 | 82 | 2019 |
| Micromechanics stress–strain behavior prediction of dual phase steel considering plasticity and grain boundaries debonding H Hosseini-Toudeshky, B Anbarlooie, J Kadkhodapour Materials & Design 68, 167-176, 2015 | 82 | 2015 |
| Additively manufactured gradient porous Ti–6Al–4V hip replacement implants embedded with cell-laden gelatin methacryloyl hydrogels E Davoodi, H Montazerian, R Esmaeilizadeh, AC Darabi, A Rashidi, ... ACS applied materials & interfaces 13 (19), 22110-22123, 2021 | 76 | 2021 |
| Octagonal auxetic metamaterials with hyperelastic properties for large compressive deformation R Hamzehei, J Kadkhodapour, AP Anaraki, S Rezaei, S Dariushi, ... International Journal of Mechanical Sciences 145, 96-105, 2018 | 73 | 2018 |
| Micro–macro investigation of deformation and failure in closed-cell aluminum foams J Kadkhodapour, S Raeisi Computational Materials Science 83, 137-148, 2014 | 73 | 2014 |
| 3D-printed multimaterial composites tailored for compliancy and strain recovery MR Mansouri, H Montazerian, S Schmauder, J Kadkhodapour Composite Structures 184, 11-17, 2018 | 70 | 2018 |
| Microstructural deformation pattern and mechanical behavior analyses of DP600 dual phase steel H Hosseini-Toudeshky, B Anbarlooie, J Kadkhodapour, G Shadalooyi Materials Science and Engineering: A 600, 108-121, 2014 | 64 | 2014 |
| Highly sensitive, piezoresistive, silicone/carbon fiber-based auxetic sensor for low strain values B Taherkhani, MB Azizkhani, J Kadkhodapour, AP Anaraki, S Rastgordani Sensors and Actuators A: Physical 305, 111939, 2020 | 60 | 2020 |
| Micromechanical analysis of two heat-treated dual phase steels: DP800 and DP980 AC Darabi, HR Chamani, J Kadkhodapour, AP Anaraki, A Alaie, ... Mechanics of Materials 110, 68-83, 2017 | 57 | 2017 |
