| Sliding wear performance of polyamide 6–clay nanocomposites in water G Srinath, R Gnanamoorthy Composites science and technology 67 (3-4), 399-405, 2007 | 156 | 2007 |
| Tribological behaviour of clay–thermoset polyester nanocomposites P Jawahar, R Gnanamoorthy, M Balasubramanian Wear 261 (7-8), 835-840, 2006 | 154 | 2006 |
| Effect of rotational speed on the performance of unreinforced and glass fiber reinforced Nylon 6 spur gears S Senthilvelan, R Gnanamoorthy Materials & design 28 (3), 765-772, 2007 | 139 | 2007 |
| Damage mechanisms in injection molded unreinforced, glass and carbon reinforced nylon 66 spur gears S Senthilvelan, R Gnanamoorthy Applied composite materials 11, 377-397, 2004 | 129 | 2004 |
| Damping characteristics of unreinforced, glass and carbon fiber reinforced nylon 6/6 spur gears S Senthilvelan, R Gnanamoorthy Polymer testing 25 (1), 56-62, 2006 | 128 | 2006 |
| Effect of nanoclay reinforcement on tensile and tribo behaviour of Nylon 6 G Srinath, R Gnanamoorthy Journal of Materials Science 40, 2897-2901, 2005 | 120 | 2005 |
| Impact force of low velocity liquid droplets measured using piezoelectric PVDF film AS Grinspan, R Gnanamoorthy Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 (1-3 …, 2010 | 116 | 2010 |
| Effect of gear tooth fillet radius on the performance of injection molded Nylon 6/6 gears S Senthilvelan, R Gnanamoorthy Materials & design 27 (8), 632-639, 2006 | 106 | 2006 |
| Effect of short fibre reinforcement on the friction and wear behaviour of nylon 66 G Srinath, R Gnanamoorthy Applied Composite Materials 12, 369-383, 2005 | 87 | 2005 |
| Influence of plasma nitriding on fretting wear behaviour of Ti–6Al–4V MM Ali, SGS Raman, SD Pathak, R Gnanamoorthy Tribology International 43 (1-2), 152-160, 2010 | 84 | 2010 |
| Transmission efficiency of polyamide nanocomposite spur gears S Kirupasankar, C Gurunathan, R Gnanamoorthy Materials & Design 39, 338-343, 2012 | 82 | 2012 |
| Abrasive wear behavior of sintered steels prepared with MoS2 addition S Dhanasekaran, R Gnanamoorthy Wear 262 (5-6), 617-623, 2007 | 78 | 2007 |
| Development of a fretting wear test rig and preliminary studies for understanding the fretting wear properties of steels R Ramesh, R Gnanamoorthy Materials & design 27 (2), 141-146, 2006 | 70 | 2006 |
| Gear tooth wear in sintered spur gears under dry running conditions S Dhanasekaran, R Gnanamoorthy Wear 265 (1-2), 81-87, 2008 | 67 | 2008 |
| Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti–6Al–4V SA Kumar, SGS Raman, TSNS Narayanan, R Gnanamoorthy Tribology International 57, 107-114, 2013 | 64 | 2013 |
| Friction and wear behavior of surface nanocrystallized aluminium alloy under dry sliding condition NA Prakash, R Gnanamoorthy, M Kamaraj Materials Science and Engineering: B 168 (1-3), 176-181, 2010 | 64 | 2010 |
| Fretting wear behaviour of surface mechanical attrition treated alloy 718 SA Kumar, SGS Raman, TSNS Narayanan, R Gnanamoorthy Surface and Coatings Technology 206 (21), 4425-4432, 2012 | 63 | 2012 |
| Friction and wear behavior of vinylester resin matrix composites filled with fly ash particles D Ray, R Gnanamoorthy Journal of Reinforced Plastics and Composites 26 (1), 5-13, 2007 | 55 | 2007 |
| Effect of humidity on the indentation hardness and flexural fatigue behavior of polyamide 6 nanocomposite KR Rajeesh, R Gnanamoorthy, R Velmurugan Materials Science and Engineering: A 527 (12), 2826-2830, 2010 | 54 | 2010 |
| Microstructure, strength and tribological behavior of Fe–C–Cu–Ni sintered steels prepared with MoS2 addition S Dhanasekaran, R Gnanamoorthy Journal of materials science 42, 4659-4666, 2007 | 48 | 2007 |
S. Ganesh Sundara RamanProfessor, Dept. of Metall. Mater. Engg., IIT Madras, Chennai, India在 iitm.ac.in 的电子邮件经过验证
