| Design of Physical Configuration of a 10N Monopropellant Hydrazine Thruster H Karimaei, M Salimi, H Naseh, E Jokari J. Sp. Sci. Technol. 12, 13-22, 2019 | 15 | 2019 |
| A new model based on coupling of MEP/CFD/ILIA for prediction of primary atomization SM Hosseinalipour, H Karimaei The Canadian Journal of Chemical Engineering 94 (4), 792-802, 2016 | 14 | 2016 |
| Design and Simulation of Fuel Injector of a 10N Monopropellant Hydrazine Thruster H Karimaei Journal of Space Science and Technology 10, 59-65, 2018 | 12 | 2018 |
| Application of maximum entropy principle for estimation of droplet-size distribution using internal flow analysis of a swirl injector SM Hosseinalipour, H Karimaei, E Movahednejad, F Ommi International Journal of Spray and Combustion Dynamics 8 (3), 205-216, 2016 | 11 | 2016 |
| Optimisation of torsional vibration system for a heavy-duty inline six-cylinder diesel engine H Karimaei, M Mehrgou, HR Chamani Proceedings of the Institution of Mechanical Engineers, Part K: Journal of …, 2019 | 10 | 2019 |
| Thermo-elasto-hydrodynamic (TEHD) analysis of oil film lubrication in big end bearing of a diesel engine H Chamani, H Karimaei, M Bahrami, SM Aghamirsalim Journal of Computational and Applied Research in Mechanical Engineering 1 (5 …, 2015 | 10 | 2015 |
| Making catalyst and preparing catalyst bed for hydrazine decomposition in Low-thrust monopropellant thrusters MR Salimi, H Karimaei Technology in Aerospace Engineering 2 (1), 17-25, 2018 | 8 | 2018 |
| Numerical study the effect of mass flow rate on liquid sheet properties resulting from a swirl injector SM Hosseinalipour, H Karimaei, F Ommi 3nd Proceeding of Gas Turbine, Iran University of Science and Technology …, 2014 | 8 | 2014 |
| prediction of air core and injection angle of a swirl injector using 3D analysis SM Hosseinalipour, H Karimaei 2nd proceding of gas turbine, 2012 | 8 | 2012 |
| Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model SM Hosseinalipour, H Karimaei, E Movahednejad Chinese journal of chemical engineering 24 (11), 1625-1630, 2016 | 7 | 2016 |
| Effect of liquid sheet and gas streams characteristics on the instability of a hollow cone spray using an improved linear instability analysis SM Hosseinalipour, R Ghorbani, H Karimaei Asia‐Pacific Journal of Chemical Engineering 11 (1), 24-33, 2016 | 7 | 2016 |
| study the Y-atomizer performance of a power plant in order to extract mean droplet diameter range SM Hosseinalipour, H Karimaei, R Ghorbani 2nd proceedings of gas turbine, 2013 | 7 | 2013 |
| Experimental characterization of a swirl injector with tangential inlets. S Mostafa Hosseinalipour, H Karimaei, F Ommi Modares Mechanical Engineering 14 (10), 2015 | 6 | 2015 |
| Study of Cavitation and Wear Damages in Conrod Big End Bearing of a Heavy Duty Diesel Engine by Using Elasto-Hydrodynamic Method H Karimaei, H Chamani Internal Combustion Engine Division Fall Technical Conference 43635, 553-565, 2009 | 6 | 2009 |
| Implementation of linear stability theory on hollow cone-shaped liquid sheet H Karimaei, R Ghorbani, SM Hosseinalipour Periodica Polytechnica Mechanical Engineering 64 (3), 179-188, 2020 | 3 | 2020 |
| Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft H Karimaei International Journal of Reliability, Risk and Safety: Theory and …, 2020 | 3 | 2020 |
| Experimental analysis of the spray characteristics of a swirl injector SM Hosseinalipour, H Karimaei, F Ommi Scientific Research Journal of Tabriz University Mechanical Engineering, 2016 | 3 | 2016 |
| Effects of bearing steps on probable wear damage of main bearings of an IC engine H Karimaei, HR Chamani International Journal of Automotive and Mechanical Engineering 18 (2), 8714 …, 2021 | 2 | 2021 |
| Effect of crankshaft and crankcase material stiffness on load distribution in main bearings H Karimaei, HR Chamani International Journal of Automotive and Mechanical Engineering 15 (4), 5941-5956, 2018 | 2 | 2018 |
| Design, Numerical Simulation and Experiment of a Swirl Injector with Tangential Inlets SM HOSSEINALIPOUR, H KARIMAEI, F OMMI FUEL AND COMBUSTION 7 (2), 97-110, 2014 | 2 | 2014 |
