Carbon nanotube–polymer interactions in nanocomposites: a review M Rahmat, P Hubert Composites Science and Technology 72 (1), 72-84, 2011 | 534 | 2011 |
Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes B Ashrafi, J Guan, V Mirjalili, Y Zhang, L Chun, P Hubert, B Simard, ... Composites science and technology 71 (13), 1569-1578, 2011 | 279 | 2011 |
Measuring the impregnation of an out-of-autoclave prepreg by micro-CT T Centea, P Hubert Composites Science and Technology 71 (5), 593-599, 2011 | 206 | 2011 |
Aspects of the compaction of composite angle laminates: an experimental investigation P Hubert, A Poursartip Journal of Composite Materials 35 (1), 2-26, 2001 | 200 | 2001 |
Characterization methodology of thermoset resins for the processing of composite materials—case study: CYCOM 890RTM epoxy resin L Khoun, T Centea, P Hubert Journal of Composite Materials 44 (11), 1397-1415, 2010 | 179 | 2010 |
Helical carbon nanotube arrays: mechanical properties RB Pipes, P Hubert Composites Science and Technology 62 (3), 419-428, 2002 | 175 | 2002 |
A two‐dimensional flow model for the process simulation of complex shape composite laminates P Hubert, R Vaziri, A Poursartip International Journal for Numerical Methods in Engineering 44 (1), 1-26, 1999 | 171 | 1999 |
Modeling the elastic properties of carbon nanotube array/polymer composites B Ashrafi, P Hubert Composites Science and Technology 66 (3-4), 387-396, 2006 | 169 | 2006 |
A review of flow and compaction modelling relevant to thermoset matrix laminate processing P Hubert, A Poursartip Journal of reinforced plastics and composites 17 (4), 286-318, 1998 | 157 | 1998 |
Carbon nanotube-reinforced composites as structural materials for microactuators in microelectromechanical systems B Ashrafi, P Hubert, S Vengallatore Nanotechnology 17 (19), 4895, 2006 | 154 | 2006 |
Cure shrinkage characterization and modeling of a polyester resin containing low profile additives M Haider, P Hubert, L Lessard Composites Part A: Applied Science and Manufacturing 38 (3), 994-1009, 2007 | 144 | 2007 |
Cure kinetics and viscosity models for Hexcel 8552 epoxy resin P Hubert, A Johnston, A Poursartip, K Nelson International SAMPE symposium and exhibition, 2341-2354, 2001 | 129 | 2001 |
Cure shrinkage characterization of an epoxy resin system by two in situ measurement methods L Khoun, P Hubert Polymer composites 31 (9), 1603-1610, 2010 | 127 | 2010 |
Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregs T Centea, P Hubert Composites Part A: applied science and manufacturing 43 (9), 1505-1513, 2012 | 119 | 2012 |
Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites L Khoun, R de Oliveira, V Michaud, P Hubert Composites Part A: Applied Science and Manufacturing 42 (3), 274-282, 2011 | 118 | 2011 |
Correlation between Young’s modulus and impregnation quality of epoxy-impregnated SWCNT buckypaper B Ashrafi, J Guan, V Mirjalili, P Hubert, B Simard, A Johnston Composites Part A: Applied Science and Manufacturing 41 (9), 1184-1191, 2010 | 116 | 2010 |
Modelling of the carbon nanotube bridging effect on the toughening of polymers and experimental verification V Mirjalili, P Hubert Composites Science and Technology 70 (10), 1537-1543, 2010 | 113 | 2010 |
Out-of-autoclave prepreg consolidation under deficient pressure conditions T Centea, P Hubert Journal of Composite Materials 48 (16), 2033-2045, 2014 | 108 | 2014 |
Self-consistent properties of carbon nanotubes and hexagonal arrays as composite reinforcements RB Pipes, SJV Frankland, P Hubert, E Saether Composites Science and Technology 63 (10), 1349-1358, 2003 | 108 | 2003 |
Thermal models for MTM45-1 and Cycom 5320 out-of-autoclave prepreg resins J Kratz, K Hsiao, G Fernlund, P Hubert Journal of Composite Materials 47 (3), 341-352, 2013 | 106 | 2013 |