| Exceptional grain refinement of Mg-Zr master alloy treated by tungsten inert gas arc re-melting with ultra-high frequency pulses X Tong, G Wu, MA Easton, M Sun, DH StJohn, R Jiang, F Qi Scripta Materialia 215, 114700, 2022 | 60 | 2022 |
| Regulation of precipitation behavior among T1, S', and θ'phases in Al–Cu–Li-(Mg–Ag) alloys by optimizing Ag/Mg ratios X Xu, G Wu, L Zhang, X Tong, F Qi, Y Guo, L Li, X Xiong, C Wang Materials Science and Engineering: A 876, 145158, 2023 | 30 | 2023 |
| Effect of heat treatment on the stress corrosion cracking behavior of cast Mg-3Nd-3Gd-0.2 Zn-0.5 Zr alloy in a 3.5 wt% NaCl salt spray environment F Qi, X Zhang, G Wu, W Liu, L Wen, H Xie, S Xu, X Tong Materials Characterization 183, 111630, 2022 | 28 | 2022 |
| High cycle fatigue behavior and mechanical performance of a novel sand-cast Mg-Nd-Gd alloy: Effect of heat treatment F Qi, X Zhang, G Wu, W Liu, X He, W Ding Materials Science and Engineering: A 813, 141172, 2021 | 23 | 2021 |
| Influence of Cu addition on hot tearing susceptibility and fluidity of Al-Li-Cu alloys: Experimental investigation, criterion prediction and simulation assessment Y Guo, L Zhang, G Wu, Y Wang, F Qi, X Xu, X Tong Journal of Alloys and Compounds 969, 172301, 2023 | 17 | 2023 |
| Microstructure and mechanical properties of cast Al-Li-Mg alloy: Role of Cu addition and heat treatment F Qi, G Wu, L Zhang, X Tong, X Xu, Y Guo Journal of Materials Science & Technology 199, 1-16, 2024 | 14 | 2024 |
| Microstructure and strengthening mechanism of TIG welded joints of a Mg-Nd-Gd alloy: Effects of heat input and pulse current Q Wang, X Tong, G Wu, J Zhan, F Qi, L Zhang, W Liu Materials Science and Engineering: A 869, 144816, 2023 | 9 | 2023 |
| Enhancing strength-ductility synergy in an extruded Al-Cu-Li-Mg-Ag alloy via homogeneous GP zones and dislocation configuration X Xu, G Wu, X Tong, L Zhang, C Wang, F Qi, Y Guo, X Zeng Materials & Design 239, 112766, 2024 | 8 | 2024 |
| Insight into the microstructure configuration and strengthening mechanisms of a cast in-situ Al3Zr reinforced Al–Li matrix composite F Qi, G Wu, X Tong, M Sun, L Zhang, J Sun, Y Guo Composites Communications 45, 101809, 2024 | 8 | 2024 |
| Aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy Y Huang, J Sun, F Qi, Y Guo, G Wu, W Liu Journal of Magnesium and Alloys, 2024 | 7 | 2024 |
| Exceptional mechanical properties of wire arc additive manufactured Mg-9Gd-3Y-0.5 Zr alloy induced by promoted precipitation behavior J Zhan, G Wu, X Tong, F Qi, Q Wang, R Jiang, Y Guo, Z Zhao, P Bai Journal of Magnesium and Alloys, 2024 | 7 | 2024 |
| On the microstructural characteristics and mechanical properties of Al− 2Li− 2Cu− 0.5 Mg alloy: the role of Yb additions X Zhang, G Wu, L Zhang, S Pang, G Wei, H Xie, F Qi, B Sun Journal of Materials Science, 1-21, 2022 | 7 | 2022 |
| Achieving superior strength-ductility balance by tailoring dislocation density and shearable GP zone of extruded Al-Cu-Li alloy X Xu, G Wu, X Tong, L Zhang, C Wang, F Qi, X Zeng, Y Guo International Journal of Plasticity 182, 104135, 2024 | 6 | 2024 |
| Effect of Li Content on Hot-Tearing Susceptibility of Ternary Al-Cu-Li Alloys: Experimental Investigation, Criterion Prediction, and Simulation Assessment Y Guo, L Zhang, G Wu, Y Wang, F Qi, X Xu, X Tong, P Li, G Ren, Y Geng, ... Metallurgical and Materials Transactions A 54 (12), 4850-4867, 2023 | 6 | 2023 |
| Effect of aging treatment on high temperature mechanical properties of a cast Al–Li–Cu alloy S Zhang, F Qi, L Zhang, G Wu, X Tong, J Zhan, Y Wang, Y Geng Materials Science and Engineering: A 896, 146300, 2024 | 4 | 2024 |
| Enhanced ductility by tailoring precipitations in micron TiB2 reinforced Mg-Li matrix composites with high modulus J Sun, Y Huang, W Liu, G Wu, F Qi, Y Guo Materials & Design 239, 112739, 2024 | 4 | 2024 |
| Achieving low hot tearing susceptibility in high-strength cast Al–Li alloys: Experimental investigation and simulation assessment Y Guo, F Qi, L Zhang, G Wu, Y Wang, Y Wang, J Zhan, Y Huang, Y Li, ... Materials Science and Engineering: A 910, 146901, 2024 | 3 | 2024 |
| Unveiling the origin of severe hot cracking susceptibility in Al-Li alloys Y Guo, F Qi, L Zhang, G Wu, J Zhan, X Xiao Materials Letters 367, 136606, 2024 | 3 | 2024 |
| Microstructure evolution and corrosion behavior of TIG welded joint of a new MgGdNdZnZr alloy during post-weld heat treatment X Tong, Q Wang, G Wu, F Qi, J Zhan, L Zhang Journal of Magnesium and Alloys, 2024 | 2 | 2024 |
| 镁稀土合金疲劳性能的研究进展 戚方舟， 张小龙， 吴国华， 张亮， 刘文才， 丁文江 特种铸造及有色合金 41 (5), 629-637, 2021 | 2 | 2021 |
