Compressive Viscoplastic Response of 6082‐T6 and 7075‐T6 Aluminium Alloys Under Wide Range of Strain Rate at Room Temperature: Experiments and Modelling W Moćko, JA Rodríguez‐Martínez, ZL Kowalewski, A Rusinek Strain 48 (6), 498-509, 2012 | 78 | 2012 |
The influence of stress-controlled tensile fatigue loading on the stress–strain characteristics of AISI 1045 steel W Moćko Materials & Design 58, 145-153, 2014 | 59 | 2014 |
Mechanical Properties of A359/SiCp Metal Matrix Composites at Wide Range of Strain Rates W Moćko, ZL Kowalewski Applied Mechanics and Materials 82, 166-171, 2011 | 33 | 2011 |
Analysis of deformation history and damage initiation for 6082-T6 aluminium alloy loaded at classic and symmetric Taylor impact test conditions W Moćko, J Janiszewski, J Radziejewska, M Grązka International Journal of Impact Engineering, 2014 | 32 | 2014 |
Mechanical response of dual phase steel at quasi-static and dynamic tensile loadings after initial fatigue loading W Moćko, A Brodecki, L Kruszka Mechanics of Materials, 2015 | 30 | 2015 |
An influence of cyclic loading on the form of constitutive relationship for DP500 steel W Moćko, P Grzywna, ZL Kowalewski, J Radziejewska Materials & Design 103, 183-193, 2016 | 26 | 2016 |
Dynamic compression tests-current achievements and future development W Moćko, ZL Kowalewski Engineering Transactions 59, 235-248, 2011 | 26 | 2011 |
Effects of pre-fatigue on the strain localization during tensile tests of DP 500 steel at low and high strain rates W Moćko, A Brodecki, J Radziejewska The Journal of Strain Analysis for Engineering Design, 0309324715599132, 2015 | 23 | 2015 |
Dynamic Properties of Aluminium Alloys Used in Automotive Industry W Moćko, ZL Kowalewski Journal of KONES 19 (2/2012), 345-352, 2012 | 23 | 2012 |
Analysis of the plastic deformation of AISI 304 steel induced by the nanosecond laser pulse W Moćko, J Radziejewska, A Sarzyński, M Strzelec, J Marczak Optics & Laser Technology 90, 165-173, 2017 | 21 | 2017 |
Results of Strain Rate and Temperature on Mechanical Properties of Selected Structural Steels W Moćko, L Kruszka Procedia Engineering 57, 789-797, 2013 | 21 | 2013 |
Analysis of the impact of the frequency range of the tensometer bridge and projectile geometry on the results of the measurement by the split Hopkinson pressure bar method W Moćko Metrology and Measurement Systems 20 (4), 555-564, 2013 | 19 | 2013 |
Evolution of tensile properties of the TiAl6V4 alloy due to the prior cyclic loading history W Moćko, ZL Kowalewski Journal of Theoretical and Applied Mechanics 52 (3), 847-851, 2014 | 17 | 2014 |
Application of FEM in the assessment of phenomena associated with dynamic investigations on a miniaturised DICT testing stand W MOCKO, ZL KOWALEWSKI Kovove Mater. 51, 71–82, 2013 | 17 | 2013 |
Comparative experimental study of dynamic compressive strength of mortar with glass and basalt fibres L Kruszka, W Moćko, L Fenu, E Cadoni EPJ Web of Conferences 94, 05008, 2015 | 16 | 2015 |
Application of an extended Rusinek–Klepaczko constitutive model to predict the mechanical behavior of 6082-T6 aluminum under Taylor impact test conditions W Moćko, J Janiszewski, M Grązka The Journal of Strain Analysis for Engineering Design 48 (6), 364-375, 2013 | 16 | 2013 |
Perspektywy rozwoju rynku samochodów elektrycznych w najbliższych latach W Moćko, A Wojciechowski, M Ornowski Transport samochodowy, 2011 | 15 | 2011 |
Simulation of nanoindentation experiments of single‐layer and double‐layer thin films using finite element method W Moćko, M Szymańska, M Śmietana, M Kalisz Surface and Interface Analysis, 2014 | 14 | 2014 |
Application of optical field analysis of tensile tests for calibration of the Rusinek–Klepaczko constitutive relation of Ti6Al4V titanium alloy W Moćko, A Brodecki Materials & Design, 2015 | 13 | 2015 |
BADANIE ZUŻYCIA ENERGII PRZEZ SAMOCHÓD ELEKTRYCZNY W CZASIE TESTÓW DROGOWYCH W Moćko, M Ornowski, M Szymańska Zeszyty Problemowe – Maszyny Elektryczn 99, 31-35, 2013 | 12 | 2013 |