Review on the use of diesel–biodiesel–alcohol blends in compression ignition engines R Niculescu, A Clenci, V Iorga-Siman Energies 12 (7), 1194, 2019 | 151 | 2019 |
Some aspects concerning the combination of downsizing with turbocharging, variable compression ratio, and variable intake valve lift AC Clenci, G Descombes, P Podevin, V Hara Proceedings of the Institution of Mechanical Engineers, Part D: Journal of …, 2007 | 64 | 2007 |
Influence of the lubricating oil pressure and temperature on the performance at low speeds of a centrifugal compressor for an automotive engine P Podevin, A Clenci, G Descombes Applied Thermal Engineering 31 (2-3), 194-201, 2011 | 56 | 2011 |
A CFD (computational fluid dynamics) study on the effects of operating an engine with low intake valve lift at idle corresponding speed AC Clenci, V Iorga-Simăn, M Deligant, P Podevin, G Descombes, ... Energy 71, 202-217, 2014 | 44 | 2014 |
Progress in high performance, low emissions, and exergy recovery in internal combustion engines P Punov, T Evtimov, R Chiriac, A Clenci, Q Danel, G Descombes International journal of energy research 41 (9), 1229-1241, 2017 | 28 | 2017 |
Impact of Biodiesel Blends and Di-Ethyl-Ether on the Cold Starting Performance of a Compression Ignition Engine A CLENCI, A., NICULESCU, R., DANLOS, A., IORGA-SIMĂN, V., TRICĂ Energies 9 (4), 284-303, 2016 | 26 | 2016 |
Performances of turbocharger at low speed P Podevin, M Toussaint, G Richard, G Farinole EAEC, Belgrade, 2005 | 25 | 2005 |
Idle operation with low intake valve lift in a port fuel injected engine A Clenci, A Bîzîiac, P Podevin, G Descombes, M Deligant, R Niculescu Energies 6 (6), 2874-2891, 2013 | 13 | 2013 |
Assessment of real driving emissions via portable emission measurement system A Clenci, V Sălan, R Niculescu, V Iorga-Simăn, C Zaharia IOP Conference Series: Materials Science and Engineering 252 (1), 012084, 2017 | 12 | 2017 |
Study on the engine oil's wear based on the flash point R Niculescu, V Iorga-Simăn, A Trică, A Clenci IOP conference series: materials science and engineering 147 (1), 012124, 2016 | 11 | 2016 |
Moteurs à taux de compression variable P Podevin, A Clenci Ed. Techniques Ingénieur, 2008 | 11 | 2008 |
Engine oil analysis to evaluate the degree of its wear during the period of operation of the vehicle C Zaharia, R Niculescu, M Năstase, A Clenci, V Iorga-Simăn IOP Conference Series: Materials Science and Engineering 1220 (1), 012037, 2022 | 10 | 2022 |
Researches regarding mechanical efficiency evaluation at turbochargers P Podevin, G Descombes, A Clenci, C Zaharia Proceeding of the International Automotive Congress, Brasov, Romania, 2004 | 10 | 2004 |
An overview on the Miller-Atkinson over-expansion thermodynamic cycle M Niculae, A Clenci, V Iorga-Simăn, R Niculescu IOP Conference Series: Materials Science and Engineering 564 (1), 012125, 2019 | 9 | 2019 |
Progress in high performances, low emissions, and exergy recovery in internal combustion engines P Punov, T Evtimov, R Chiriac, A Clenci, Q Danel, G Descombes Exergy for A Better Environment and Improved Sustainability 1: Fundamentals …, 2018 | 8 | 2018 |
Adaptive thermal engine with variable compression ratio and variable intake valve lift V Hara, A Clenci Editura Universităţii din Piteşti, 2002 | 8 | 2002 |
Surge detection on an automotive turbocharger during transient phases M Deligant, A Danlos, P Podevin, A Clenci, S Guilain IOP Conference Series: Materials Science and Engineering 252 (1), 012082, 2017 | 7 | 2017 |
Technologies de distribution variable pour moteurs à combustion interne P Podevin, A Clenci Editions TI, 2012 | 7 | 2012 |
Mechanical power losses of turbocharger at low speeds M Deligant, P Podevin, A Clenci Scientific Bulletin of University of Pitesti, Automotive Series 20 (B), 33-38, 2010 | 7 | 2010 |
Experimental investigation of the effect of an afterburner on the light-off performance of an exhaust after-treatment system A Clenci, J Berquez, R Stoica, R Niculescu, B Cioc, C Zaharia, ... Energy Reports 8, 406-418, 2022 | 6 | 2022 |