| Wear properties of Al–Al2O3/TiB2 surface hybrid composite layer prepared by friction stir process R Vatankhah Barenji, V M Khojastehnezhad, H H Pourasl, A Rabiezadeh Journal of Composite Materials 50 (11), 1457-1466, 2016 | 69 | 2016 |
| Electrical discharge machining of the AISI D6 tool steel: Prediction and modeling of the material removal rate and tool wear ratio RV Barenji, HH Pourasl, VM Khojastehnezhad Precision Engineering 45, 435-444, 2016 | 65 | 2016 |
| Microstructural characterization and mechanical properties of aluminum 6061-T6 plates welded with copper insert plate (Al/Cu/Al) using friction stir welding VM Khojastehnezhad, HH Pourasl Transactions of Nonferrous Metals Society of China 28 (3), 415-426, 2018 | 60 | 2018 |
| Solar energy status in the world: A comprehensive review HH Pourasl, RV Barenji, VM Khojastehnezhad Energy Reports 10, 3474-3493, 2023 | 39 | 2023 |
| Effect of tool pin profile on the microstructure and mechanical properties of friction stir processed Al6061/Al2O3—TiB2 surface hybrid composite layer VM Khojastehnezhad, HH Pourasl, R Vatankhah Barenji Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2019 | 34 | 2019 |
| The performance prediction of electrical discharge machining of AISI D6 tool steel using ANN and ANFIS techniques: a comparative study HH Pourasl, M Javidani, VM Khojastehnezhad, R Vatankhah Barenji Crystals 12 (3), 343, 2022 | 13 | 2022 |
| Techno-economic analysis of wind energy potential in Kazakhstan HH Pourasl, VM Khojastehnezhad Proceedings of the Institution of Mechanical Engineers, Part A: Journal of …, 2021 | 11 | 2021 |
| Techno-economic comparison of fixed and tracking flat plate solar collectors in the northern hemisphere A Bahrami, CO Okoye, HH Pourasl, VM Khojastehnezhad Journal of Cleaner Production 378, 134523, 2022 | 10 | 2022 |
| Estimation of mechanical properties of friction stir processed Al 6061/Al2O3-Tib2 hybrid metal matrix composite layer via artificial neural network and response … VM Khojastehnezhad, HH Pourasl, A Bahrami Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2021 | 9 | 2021 |
| Elucidating the effect of electrical discharge machining parameters on the surface roughness of AISI D6 tool steel using response surface method HH Pourasl, RV Barenji, VM Khojastehnezhad NISCAIR-CSIR, India, 2017 | 6 | 2017 |
| Size-dependent free vibration of functionally graded beams with a tip nanoparticle and a nonlinear spring constraint via strain gradient theory A Bahrami, A Zargaripoor, VM Khojastehnezhad, HH Pourasl Mechanics of Advanced Materials and Structures 31 (8), 1746-1759, 2024 | 5 | 2024 |
| Flow structures in the wake region of two inclined flat plates in a symmetrical tandem arrangement A Bahrami, HH Pourasl, VM Khojastehnezhad International Journal of Fluid Mechanics Research 51 (1), 2024 | 1 | 2024 |
| Flow structures in the wake region of an L-shaped cylinder and a triangular cylinder A Bahrami International Journal of Fluid Mechanics Research 51 (3), 2024 | | 2024 |
| Resonance frequencies of functionally graded nanocantilevers subjected to nonlinear spring constraint and attached nanoparticle A Bahrami, A Zargaripoor, VM Khojastehnezhad, HH Pourasl, ... Acta Mechanica 234 (3), 991-1007, 2023 | | 2023 |
| Microstructures and Mechanical Properties of Al 6061/Al2O3-TiB2 Hybrid Nano-Composite layer Produced via Friction Stir Processing Using Optimized Process Parameters VM Khojastehnezhad Eastern Mediterranean University (EMU)-Doğu Akdeniz Üniversitesi (DAÜ), 2019 | | 2019 |
| 搅拌摩擦焊含铜嵌入板的 6061-T6 铝合金 (Al/Cu/Al) 的显微组织和力学性能 (英文) M Khojastehnezhad, H Pourasl Transactions of Nonferrous Metals Society of China 28 (3), 415-426, 2018 | | 2018 |
Hamed PouraslCyprus International University在 ciu.edu.tr 的电子邮件经过验证
Hamed PouraslCyprus International University在 ciu.edu.tr 的电子邮件经过验证
Reza Vatankhah BarenjiNottingham Trent University在 ntu.ac.uk 的电子邮件经过验证