On the use of the half-power bandwidth method to estimate damping in building structures GA Papagiannopoulos, GD Hatzigeorgiou Soil Dynamics and Earthquake Engineering 31 (7), 1075-1079, 2011 | 237 | 2011 |
Evaluation of maximum seismic displacements of SDOF systems from their residual deformation GD Hatzigeorgiou, GA Papagiannopoulos, DE Beskos Engineering structures 33 (12), 3422-3431, 2011 | 78 | 2011 |
Fragility curves for mixed concrete/steel frames subjected to seismic excitation NG Pnevmatikos, GA Papagiannopoulos, GS Papavasileiou Soil Dynamics and Earthquake Engineering 116, 709-713, 2019 | 40 | 2019 |
Towards a seismic design method for plane steel frames using equivalent modal damping ratios GA Papagiannopoulos, DE Beskos Soil Dynamics and Earthquake Engineering 30 (10), 1106-1118, 2010 | 37 | 2010 |
On a modal damping identification model of building structures GA Papagiannopoulos, DE Beskos Archive of Applied Mechanics 76, 443-463, 2006 | 37 | 2006 |
On a modal damping identification model for non-classically damped linear building structures subjected to earthquakes GA Papagiannopoulos, DE Beskos Soil Dynamics and Earthquake Engineering 29 (3), 583-589, 2009 | 32 | 2009 |
Seismic analysis of offshore platforms subjected to pulse-type ground motions compatible with European Standards FD Konstandakopoulou, KI Evangelinos, IE Nikolaou, ... Soil Dynamics and Earthquake Engineering 129, 105713, 2020 | 27 | 2020 |
Recovery of spectral absolute acceleration and spectral relative velocity from their pseudo-spectral counterparts GA Papagiannopoulos, GD Hatzigeorgiou, DE Beskos Earthq Struct 4 (5), 489-508, 2013 | 27 | 2013 |
On the seismic response of steel buckling-restrained braced structures including soil-structure interaction AK Flogeras, GA Papagiannopoulos Earthq. Struct 12 (4), 469-478, 2017 | 22 | 2017 |
On the seismic response and damping capacity of low-rise plane steel frames with seesaw system PS Katsimpini, GA Papagiannopoulos, MG Sfakianakis Soil Dynamics and Earthquake Engineering 107, 407-416, 2018 | 21 | 2018 |
On the seismic behaviour of tension-only concentrically braced steel structures GA Papagiannopoulos Soil Dynamics and Earthquake Engineering 115, 27-35, 2018 | 20 | 2018 |
Modal strength reduction factors for seismic design of plane steel frames GA Papagiannopoulos, DE Beskos Earthquake and Structures 2 (1), 65-88, 2011 | 20 | 2011 |
Modal strength reduction factors for seismic design of plane steel braced frames NA Kalapodis, GA Papagiannopoulos, DE Beskos Journal of Constructional Steel Research 147, 549-563, 2018 | 19 | 2018 |
Seismic response of low-rise 3-D steel structures equipped with the seesaw system PS Katsimpini, GA Papagiannopoulos, PK Askouni, DL Karabalis Soil Dynamics and Earthquake Engineering 128, 105877, 2020 | 18 | 2020 |
Heuristic optimization of cylindrical thin-walled steel tanks under seismic loads MK Minoglou, GD Hatzigeorgiou, GA Papagiannopoulos Thin-Walled Structures 64, 50-59, 2013 | 17 | 2013 |
Deformation dependent equivalent modal damping ratios for the performance-based seismic design of plane R/C structures EV Muho, GA Papagiannopoulos, DE Beskos Soil Dynamics and Earthquake Engineering 129, 2020 | 16 | 2020 |
A seismic design method for reinforced concrete moment resisting frames using modal strength reduction factors EV Muho, GA Papagiannopoulos, DE Beskos Bulletin of Earthquake Engineering 17, 337-390, 2019 | 16 | 2019 |
Modal strength reduction factors for seismic design of steel moment resisting frames DG Loulelis, GA Papagiannopoulos, DE Beskos Engineering Structures 154, 23-37, 2018 | 16 | 2018 |
Seismic pressures on rigid cantilever walls retaining linear poroelastic soil: An exact solution GA Papagiannopoulos, DE Beskos, T Triantafyllidis Soil Dynamics and Earthquake Engineering 77, 208-219, 2015 | 16 | 2015 |
Seismic drift response of seesaw-braced and buckling-restrained braced steel structures: a comparison study PS Katsimpini, PK Askouni, GA Papagiannopoulos, DL Karabalis Soil Dynamics and Earthquake Engineering 129, 105925, 2020 | 15 | 2020 |